Construction of 1set of 1 BHK Quarter at PHC Turtuk Nubra.

Amount

Civil Items. Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil . including cost of carriage compltete job.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying DPC 50mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size)Nallah

Providing and fixing upto floor five precast concrete hollow block including hoisting and setting in position with cement mortar (1:3) cost of required centering shuttering and fixing smooth with 6mm thick cement plaster (1:3) on expose surface complete (1:3:6) Stone aggregate 20mm nominal size

Providing and Constructing cement stabilized mud block masonry (mud block made out of soil containing 60% to 70% of sand and 10% of clay and 5% of cement pressed using manual machine) in cement mortar 1:4 in walls. The size of the block is 305x143x100 mm. laid in course cement mortar as per the direction of Engineer in-charge

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form work for : a. Foundation footing bases of columns etc for mass conc. Pillar foundation:

b, Columns ,pillars, piers Abutments post and struts.

c. Lintels beams plinth beams bressumers Beams

d. Suspended floors roofs landing balconies

e. Edges of slabs and breaks in floors and walls(under 20cms wide).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Ist class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enameled M.S butt hinges with necessary screws. Ist class kail wood 35mm

Providing and fixing glazed shutter for doors, windows and clearstory windows using 10kg/sqm (4mm thick) float gass panes including ISI marked M.S pressed butt hinges bright finished of required rings with screws and 35mm thick. ( Ist class kail wood)

15mm thick cement plaster on rough side of single or half brick wall of mix 1:4(1 cement: 4Fine sand)

6mm thick cement plaster 1:3 (1 cement : 3 Fine sand) to ceiling of mix

Providing and applying white cement based putty of avg. thickness 2mm of approved brand and manufacture over the plastered wall surface to parapet surface.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (one or more coats)

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture of wood work(Hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.

Dry stone pitching(any thickness)excluding cost of stone on horizontal. 4 inch thick

Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 stone aggregate 20mm nominal size finishing with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. 50mm thick 20mm nominal size stone aggregate crushed.

Providing and fixing aluminum sliding door bolts

Providing and fixing aluminum tower bolts

Providing and fixing aluminum handle.

Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift upto 1.5m.

P/F 8mm thick pre laminated wooden flooring(Green panal)HDF including 1.5mm thick form and wooden beading 50x12mm size.

12 mm thick prelaminated particle board (decorative lamination on both sides) grade-1, medium density flat pressed, three layer particle board FPT-1 or graded wood particle board FPT-1 , conforming to IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade-1, Type II. mark

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing soil waste and vent pipe a) 100mm dia

b) 75mm dia

Providing and fixing plain bend of required degree a) 100mm dia

b) 75mm dia

Providing and fixing single equal plain junction of required degree. c) 100mm dia

d) 75mm dia

Providing and fixing 100mm PVC floor or Nahani trap.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings including trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.a, 25mm dia

b, 32mm dia

Providing and fixing over head shower

Providing and fixing toilet paper holder

Providing and fixing soap dish

Providing and fixing towel rail

Providing and fixing towel ring.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screw and washers complete

Providing and fixing CP brass basin mixer pillar tap of approved quality and make

Providing and fixing CP wall mixer of standard design and approved quality and make

Providing and fixing CP brass bib cock of approved quality and make

Providing and fixing CP brass stop cock of approved quality and make

Providing and fixing floor jail

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan

Extra for providing coloured other then black solid PVC plastic seat and cover in European type WC pan instead of white plastic seat and cover

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With solid block

Providing and fixing jet for western type water closet

Providing and fixing of P trap.

Providing and fixing Kitchen sink with stainless wash basin 530x530mm with single 15mm C.P brass pillar tab.

Providing and placing on terrace (all work floor level) polythene water storage Tank ISI:12701 marked indicating the BIS No. Electroplast Star etc.

Providing and fixing of pipe insulation consist of black thermacol and tape for internal pipes (complete job)

Providing and fixing of ball valve a) 32mmdia.

b) 25mmdia.

Providing and fixing of nipple tanks (32mmdia.)

Cement concrete flooring 1:2:4 stone aggregate 20mm nominal size finishing with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. 50mm thick 20mm nominal size stone aggregate crushed.

Electrical work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. A ) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b ) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c ) 2 x10sq. mm + 1X 6 sq. mm earth wire

d ) 4X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excludin modular plate etc. as required. a) 5/6 A switch

3 pin 5/6 A socket outlet

Telephone socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction boxwooden block including connections etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No.s 3 pin 5/6 A modular socket outlet and 2 No.s 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a ) 6 way (4 + 18), Double door

b ) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A ) Single pole 6 /16 amp

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a ) 25mm

Supply, installation , testing & commissioning of GI Electrode Earthing with 84mm dia and 3 meter length , with 3mm thick the electrode should be hot dip galvinised . The GI Electrode shall be pre filled with cristaline Conductive Material ( CCM ) . The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact between the electrode and compound should be eco - friendly GI Electrode Earthing should be eco - friendly GI Electorde Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

100 A,30KA,FPMCCB

Change over switch 100 Amp MCCB Type FP

Fabrication, supplying , installation testing and commissioning of following pannel made out of 2mm thick M.S sheet , floor mounted , vermin & dust proof, indoors , duly painted with provsion for fixing of1 nos incomer MCCB, , MCCB type change over switch - 1 No including supply and fixing 2 set of Aluminium bus bar and strip for housing MCB,s 24 Nos , MF Digital Meter and other allied accessories as required ( Make as per annexure)

Supplying and fixing of following rating 240 /415 Volt " C" series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection , testing and commissioning.( Above to 32 Amp) a ) SPN 63 Amp

TPN 63 Amp

Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall. Wipro LR02-132-XXX-57-G2 or equivalent approved make

Supplying & fixing following luminaries as required LL20-111-XXX-65NE3 wipro 10 watt LED tube light fitting. equivalent make and model Philips/Crompton Greaves.

20 watt LED tube light fitting. LL20-221-XXX-65NE3 of wipro or equivalent make and model Philips/Crompton Greaves.

Supplying, installation testing and commissioning of LED 2'x2' recess mounted fixture that delivers atleast 3000 lumens and wattage not more than 36 watt. The luminaries shall have a CRC a power coated body and a high efficiency diffuser. WIPRO CRCO10 RO 38HP57GL OR equivalent approved make.

Supplying and fixing of Angle / Baten Holder with 9 watt LED Lamp polycarbonate including making complete connections etc. as required. ( Make as per annexure enclosed.)

Supplying and fixing of following electrical items suitable for operating on 240 /230 volts AC, 50 HZ supply , including connection etc. as required. Exhaust fan 300 mm size ( Heavy duty) CG transair or equivalent approved make

250 mm Shutter Type

M/S GHULAM HUSSAIN GOVT CONTRACTOR

M/S MOHD SASDI

M/S SHAMSHER ALI

M/S MOHD ALI

M/S MOHAMMAD MOSSA

M/S MEHDI ALI GOVT CONTRACTOR

M/S MOHAMMAD IBRAHIM