M/T and C.D works on Sarol Bazar i/c drain (SH Construction of PCC road side drain in Km. 0/450 to 0/745)

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual means including saturated soil comprising of ordinary soil, soft rock, hard rock chiselling, wedging out of rock(where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines grades ,width, cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-Charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same within all leads and lifts in acquired width of road and transportation of un-useful material for filling in road ways camber, embankments for grade improvements and disposal of all surplus material to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and carriage of machineries ,materials, tools, equipments and safety measures and other incidentals necessary to complete as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST, or any other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 and as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150mm one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying Mechanically mixed and vibrated cement concrete for plain cement concrete Grade M-10 (M-ten) nominal mix 1:3:6 (one cement is to three sand is to six graded crushed stone aggregate20 millimetre (Twenty millimetre ) nominal size on ground or under water and curing complete for 14 (fourteen) days , in Drains etcetra including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights / depths including the cost of form work complete as per drawings and M.O.R.D. technical specification section 800,900 and 1200 or as directed by the Engineer-in-Charge including carriage of material within all leads ,lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying Mechanically mixed and vibrated concrete for plain / reinforced concrete in sub structure complete as per drawing and technical specification mix design to obtain minimum compressive strength of M-20 (M-Twenty) with 40mm (forty millimetre) nominal size crushed stone aggregate in or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights / depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900, and 1200 including carriage of material within all leads, lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar on reinforcement in sub-structure complete as per drawing and M.O.R.D. technical specifications clause 1600 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto any floor including carriage of materials within all leads and lifts and other incidental. The rate is including the octroi, royality, GST, toll tax, or any other taxes imposed by the Government.

Steel work welded in built up sections, grating and framed work of TATA including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in gratings framed gaurd bars, ladders, railing, brackets and similar works as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Supplying and fixing of cast iron medium duty 500mm dia (five hundred millimetre) cast iron cover with frame complete being not less than 58 kg. (fifty eight kilograme) including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

MANESHWAR SINGH

Apratim Ashesh Mahajan