REPAIR REPLACEMENT OF TILING JOINERY PLUMBING AND SANITARY FITTINGS INCLUDING PETTY REPAIRS TO BLDGS OF TRANSIT CAMP UNDER GE 865 EWS

Amount

Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed

Demolition of cement concrete in any description and any position not otherwise specifically provided for.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed

Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar.

Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed.

Demolition of precast concrete block /sone walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed

Taking down cement plaster / raised pointing on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement

M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection

M & L for 100 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floor of hard standing finished even and smooth with out using extra cement all as specified..

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing .

M & L for 75mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in sub base of floor all as specified..

M&L for vitrified ceramic tiles 10mm thick (light shade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and screed bed with CM (1:4) 15mm thick for laying floor tiles all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11Sqm and nexc .18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:4) 15mm thick laying floor tiles complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc .11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:4) 15mm thick laying floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:3) in dado/skirting tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:3) in dado/skirting tiles complete all as specified and directed.

M& L for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass concrete and filling of foundation all as specified and drected.

M&L dressed granite or trap /Precast cement concrete type C2 (1:3:6) (12.5 mm nominal size of graded course aggregate) Kerb stones roughly squared stones of size 20cm x 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description).

M&L for Cement concrete type B-2,1:5:10 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..

M&L PCC 1:2:4, 75 mm thick type B1 using 40mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge..

M&L sand filling (25 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge..

M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..

M&L PCC 1:2:4, 40 mm thick type B1 using 20mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..

M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:4) and all as directed by Engr-in - charge.

Precast cement concrete 1:2:4, type B1 in post , boundary pillars , pier caps, bollards and similar articles set in cement mortar 1:6

M&L mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar.

All as per item No 30 above but 6 to 8mm dia as in stirups

M&L for Granite of any type 20 mm thick over 20mm thick cement screed base (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed

M&L 6mm (5 ply) thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work complete all as specified and as directed.

Ditto all as itemmNo 38 above but on ceiling complete all as specified and as directed

M&L for 6mm thick (5 ply) plywood grade BWR type BB as in walling panelling fixed with nails to timber frame work complete all as specified and as directed.

Ditto as above but on ceiling complete all as specified and as directed

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

Ditto as above but on ceiling complete all as specified and as directed

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

M&L 7mm thick printed PVC sheet in strips & channel feathered at edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partition inclusive of solvent cement and fixing at site as per specifications and as directed by Engr-In-Charge

S&F 5mm thik PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and drawing.

M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.

M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on old surface with two or more coats complete all as specified and as directed.

Dismantling boarding / wooden flooring of any description ,fixed in any positon

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture all as specified and directed.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge.

All as per item No 53 above but n'exc 1.0 sqm complete all as directed by Engr-in-charge

Hacking old broken glass (any thickness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .

Taking down shutters of any description area not exceeding 1 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

S&F Anodised aluminium frame of standerd section for doors, windows, ventilators with double rebates including joining cleat for fixing etc. complete all as specified

M&Lfor Powder coated aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified

M&Lfor Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) (Glass / Wiremesh should be measured seperately)complete all as specified

M&L sheet glass 4.8mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and as directed

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs,excluding hinges,lock strike plate,etc,complete ,as specified ,supplied and fixed.

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) all as directed by Engr-in-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete all as specified and as directed by the Engr-in-Chage

M&L for treating wooden chowkats surface of any description n exc 10 cm in width or girth with black bituminus paint in two coats.

M&L for preparing and treating small articles of builders hardware such as MS hold fasts ,MS but hinges etc, with two coats of synthetic enamal paint over a coat of primer when un connected with other paintings or when painted in adefferent tint.

Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F for 35mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed by the Engr-in-Charge..

S&F MS framed work such as grills, gratings etc with ends of bars shouldered and/or rivited or forged into spikes, framed guard bars, barred iron doors, ladders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples.

S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Specified

Ditto all as item No 86 but except blocks.

M&L for 15mm thick rendering on other than fair faces of brick works in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thick finished even and fair without using extra cement in cement mortar 1:4 complete all as specified and as directed

M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed

Raised pointing to random or polygonal rubble, uncoursed block walling in CM 1:4 complete all as specified and as directed.

Supply only WPC

S & F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I including taking down old one as directed.

S&F in repairs rotational moulded HDPE water storage tanks 500 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48kg/Cum, (cylindrical vertical type/rectangtular loft type closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge.

S & F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position including dismantling all as specified in SSR Part I including taking down old one as directed.

S&F in repairs rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48kg/Cum (cylindrical vertical type/rectantular loft type closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge.

S & F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Make : Prayag) in flushing cistern.

S & F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.

S & F in repairs Fancy type 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule

S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repair fancy type 15 mm bore Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

All as per item No 100 above but angle stop valves.

S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins.

S & F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams)

S & F in repairs, 15 mm bore pillar taps, of PTMT any colour high pressure screwed iron for iron pipes and fixed 9Min Wt- 110gms).

S & F in repairs, 15 mm bore, bib tap,standard of PTMT any colour high pressure screwed for iron pipes and fixed (Min Wt 15mm-90 Grams)

S & F in repairs, 15 mm bore, stop valves standard of PTMT any colour high pressure screwed for iron pipes and fixed (Min Wt 15mm-90 Grams)

S&F in repairs, 15mm bore, PVC connection pipe 300 mm long with PTMT nuts at both ends.

S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.

S&F in repairs viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest, suitable 'P' or 'S' trap (excluding cistern) with front or back inlet and pattern including bedding with PCC 1:2:4 type B-I , using 20 mm graded crushed stone aggregate.

S&F in repairs viterous China wash down water closet pan (padestal pattern) white with suitable 'P' or 'S' trap (excluding fixing bolts , flushing cistern and flush pipe) including bedding with PCC 1:2:4 type B-I , using 20 mm graded crushed stone aggregate.

S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.

S & F in repairs CP health faucet ABS with double lock 1.2 mtr CP tube stainless steel flexible hose and wall hook all as specified and as directed.

S & F in repair towel rail 600mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min Wt 190 Gms)

S & F in repair CP floor gratings 150mm dia all as directed by the Engr-in-Charge

S&F in repair CP central hole basin mixer with Popup waste system with 450mm long copper pipes complete all as specified and directed by the Engr-in-Charge.

S&F in repair CP wall mixer 3-in-1 system with provision for bath Telephone shower and over head shower with bend pipe complete all as specified and directed by the Engr-in-Charge.

Preparation of plastered ssurface of wall and applying two coats of cement base paint including preparation of surfaces

M & L preparation of new plastered surfaces and applying three coats of white wash on walls

M&L for preperation of new concrete /plastered surface of any description,applaying 3mm thick wall care putty and two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed.

M&L for preperation of new untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer as directed complete all as specified and as directed.

M&L French polishing on old treated surface of wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on old surface with two or more coats complete all as specified and as directed.

S S BUILDERS

PRAVEEN KUMAR AND SONS

M.S Sharma Enterprises

ESS AAR ENTERPRISES

national engineering

M/S UNITED CONSTRUCTION CO.

SONAM ANGCHOK