repair and Renovation of Ward No 10 in SMGS Hospital Jammu

Amount

Dismantling old chips/tiles with plaster including stacking the dismantled material, lifting the malba from ward to dumping point within hospital premises for its further disposal.

Engaging labour at site of work for tucking of floor, cleaning, brooming, washing the surface and lifting the malba from ward to dumping point within hospital premises for its further disposal.

Providing and applying a layer of adhesive chemical of approved make with neat cement on old terrazzo tucked flooring before laying granite flooring to enhance the bonding.

Engaging carpenter and helper for removing of old doors/windows/ventilators that needs repair including easing out the same, dismantling of old/damaged wooden partitions and removing, cutting , refixing passage doors for laying tiles/granite etc.

Carpenter Ist Class

Carpenter 2nd Class

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Demolishing brickwork manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material and disposal of unserviceable material within 50 mtrs. Lead.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Repairing to existing damaged false ceiling by repairing old/damaged T-runner and cross Tee and gypsum tiles and binding it with binding wire complete job

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and Laying double charged vitrified floor/wall tiles of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc. complete of RAK,Khajaria etc.

Providing and fixing antiskid (Mat finished) floor tiles of size 600x600 mm (G.V.T.) on 20 mm cement mortar 1:4 including jointing with white cement GVT Eternity Khajaria/Rak make.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing fixing aluminium parttion band app 4.5 mm thick (Eurobond/Aling Strong)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing steel fixtures to doors/windows complete job.

Providing and fixing steel fixtures to doors/windows complete job.

Providing and fixing oxidized M.S. casement stays (straight peg type) with necessary screws etc. complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required:W.C. pan with ISI marked white solid plastic seat and lid (Hindware/Cera)

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (Hindware/Cera)

Engaging plumber and helper for pluging of all external supply lines, removal of all defunct C.I./GI pipes, fittings and necessary repairs to old bath units.

Plumber

Helper

Engaging sweeper for cleaning and washing of bath/W.C. including removal of accumulated storage and cleaning of old existing manhole before proceeding for defunct bath unit.

Providing and fixing new M.S. wire gauze to old windows/ventilators shutters including fitting in position complete wherever necessary.

Providing and fixing C.P. fittings (Jaquar ESSCO, Cera)

Bib Cock

Long Nose

Angle Valve

Angle Valve 2 in 1

Jet with Rod

Mirror 453 x 357 mm

C.P. Towel Ring

C.P. Grating with hole 4’’

C.P. Grating plain 4’’

Waste Coupling 32 mm dia

Waste Pipe

C.P. soap case

C.P. Nipple ½’’ x 1 ½’’

C.P. Nipple ½’’ x 1’

Providing and fixing PVC pipes @ 4kg/sqm. pressure. (Finolax/Supreme make)

75 mm dia

110 mm dia

Providing and fixing PVC fittings. (Finolax/Supreme make)

110 mm dia plain bend

110 mm dia door bend

Floor trap 4''

Door Tee 110 mm

Half Bend

Tee 110 mm dia

75 mm door bend

75 mm plain tee

75 mm plain bend

Clamp

Float Ball

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for singlepipe line- with F.P.S bricks

Extra for depth beyond 45 cm of brick masonry chamber for 455x610 mm size with F.P.S. bricks.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with 75 class designation bricks in cement mortar 1:5 (1 cement : 5 fine sand ) C.I. cover with frame (light duty) 500x700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix ( stone agg. 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 mix finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 500x700 mm and 45 cm deep for single pipe line with F.P.S. bricks.

Extra for depth beyond 45 cm of brick masonry chamber for 500x700 mm size with F.P.S. bricks

Providing and fixing based of superior PVC pipes with nuts & bolts 1’-6’’ long

Providing and fixing based of superior PVC pipes with nuts & bolts 2’ long

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area of 3 sq. metres and below.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank (Sintex,Electroplast,Star,Lotus or equivalent having valid ISI license).

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White vitreous China flat back wash basin size 550 x 400 mm with single 15 mm PTMT pillar cock.

Providing and fixing vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing gola 75x75 mm in cement concrete 1:2:4 , including finishing with cement mortar 1:3 as per standard design. In 75x75 mm deep chase.

Providing and fixing ceramic glazed floor tiles 300 x 300 mm conforming to IS:15622 or approved make in colors such as White,Ivory,grey etc. on 20 mm thick bed of cement mortar 1:4 including pointing the joints with white cement and matching pigment etc. complete.

Providing and fixing 1st quality ceramic glazed tiles conforming make like NITCO , ORIENT , SOMANY , KAJARIA make in all colors shades except burgundy , bottle green , black of any size as approved by engineer’s incharge in skirting , riser of steps and dados 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @3.30 kg/M2 including pointing in white cement mixed with pigment of matching shades complete.

Providing and laying water proofing treatment of W.C bathrooms etc by applying cement slurry mixed with water proofing cement compound consisting of applying first layer of slurry of cement @ 0.488kg/sq-m mixed with water proofing cement compound @0.253kg/sq-m this layer will be allowed to air care for four hours. (b) second layer of slurry of cement @ 0.242kg/sq-m mixed with water profimg cement compound @ 0.126kg/sqm this layer will be allowed to air care for four hours followed with water curing for 48 Hours. The rates includes preprations of surface treatment and sealing and sealing of all joints. (All carriage Complete).

Extra for diamond mesh and a subsequent coat of water proofing on the top of diamond mesh

Engaging labour for lifting all stacked malba due to dismantling/repair work from site to dumping point for its further disposal.

20 mm cement plaster of mix 1:3( 1 cement : 3 coarse sand)

Disposal of dismantled unhygienic material/malba from hospital premises to outside municipal limits by M.T. including loading/unloading complete.

M/S LANGER CONSTRUCTION

HIRA LAL

Rakesh Kumar

SURAM SINGH CONTRACTOR

harbans Lal

Ashok Kumar Gupta

SUKHDEEP SINGH JAMWAL