REPAIR AND MAINT OF CERTAIN EXTERNAL SERVICES UNDER AREA OF AGE B/R-I OF GE (AF) TECH AREA AT AF STN AGRA

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 20mm thick Granite telephonic black (of any type) machine cut, in skirting/ dado, laid over cement screed 15mm thick in CM (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with incl 15mm thick screed bed in CM 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all complete as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving of any thickness (below or above ground) complete all as specified and directed.

M&L for 75mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregate as in sub base of floor etc, finished the concrete surface even and fair complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 ( 20mm graded stone agg) 50 mm thick as in floor,coping etc, finished the concrete surface even and fair complete all as specified and directed.

M&L for 25 mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqmm (M-35 grade) without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment complete all as specified and directed.

M&L 20-25mm thick plastic coated coloured chequered tiles, area of each tile exc 0.05sqm but n.exc 0.09sqm with and incl 20mm thick screed bed in CM (1:6) of approved colour and pointing with grey cement and pigment complete all as specified and directed.

M&L for outdoor coloured industrial tiles, textured surfaces with high skid resistance, scratch resistant, impact resistant, joint free (edge cut) of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over with and including 20 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

Taking down cement plaster of any description on brick wall, ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc if any required at site for entire completion of work all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins and applying treatment for ATT on the same wall etc if any required at site for entire completion of work all as specified. Note : (i) Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’. (ii) The Total cost for ATT(Anti Termite Treatment) will be included under this item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed.

M&L for applying two or more coat of weather proof exterior emulsion paint in normal pattern/camouflage pattern by diluting of water (as per manufacturer direction) complete all as specified and directed by Engr-in-charge . Note :- Primer to be carried out through air less spray machine (Mechanical means) incl cleaning of existing windows/doors/floor etc.

M&L for preparation of new plastered surface of ceiling applying three coat of white wash by using mechanical device complete all as specified and as directed.

M&L for preparation of new surfaces of walls and applying two coat of oil bound distemper white or tinted all as directed.

M&L for complete removal of existing treatment of old surface including broomin down/ steel wire brushing, scrapping down smoke soot, mould, mos and efforescent salts and trading oil and gresy spots and cleaning with water on wall complete all as specified and as directed.

M&L for preparation of old surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , as per manufactures instructions, complete all as specified and as directed.

M&L in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed. NOTE:- work to be carried out upto 25.00m ht with necessary MS scaffolding including all other safety precautions.

Taking down old fencing including RCC/steel post with mild steel flats & nut bolts of any description complete all as specified.

Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engg-in-charge) all as specified.

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc,including necessary bolting as specified and directed.

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting and spot welding etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F Mild steel round bars 10mm dia and over as in strengthning bars for chain link fencing conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description n.exc 10cm width or girth,not otherwise described and apply two coat of synthetic enamel paint over one coat of red primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer complete.

M&L for preparation of old steel/galvanised steel surfaces of any description of any width or girth, not otherwise described and apply two coat of Aluminium paint over fencing wire or other surface suitable to this paint over one coat of red oxide primer complete complete all as specified and as directed.

M&L in repair factory made perforated precast RCC drain cover 75mm thcik any size incl 1mm MS Sheet all around the cover(incl placing ) complete all as specified and directed by Engr-In-Charge.

M&L in repair factory made perforated precast RCC Manhole cover 75mm thcik any size incl 1mm MS Sheet all around the cover (incl placing)complete all as specified and directed by Engr-In-Charge..

S&F in repair PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed

S&F in repair PVC (SWR) plain bend 110 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

S&F in repair PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, fixed on walls including necessary fixing arrangements etc complete all as specified and as directed

S&F in repair PVC (SWR) plain bend 160 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

M&L for cleaning of drain n.exc. 60 cm wide and n.exc 60cm in depth by removing deposited soft / loose soil, vegitation/grass and other foreign material and removal of excavated material to a distance exc 50 m but n.exc. 100 m and deposited wherever directed complete all as specified and directed by Engr-in-Charge.

De-silting of water drain by cleaning of settled deposited soil/earth/ mud etc, including getting out and removing excavated materials and deposited the same to a distance not exceeding 500 meter complete all as specified and directed.

M&L for Framed work such as in grills, gratings with ends of bar shouldered and/ or riveted forged into spikes including welding complete including Dismantling of any discription or provided all as specified & directed.

M&L for Preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade of any size cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making painting exterior emulsion on it,drainage opening wherever required including dismantling/demolition of existing complete all as specified and directed.

Taking down existing door frame / shutters of area n.exc 60 Sqm by hydraulic/ mechanical cranes other tools & plant, necessary scaffolding required for lowering down the shutters carefully without causing damage to other components of hangars for repairing work straightning of frame angle and any section used in iron gates and re-fixing the door shutters in same position after necessary repairs complete all as specified and as directed. Note :- (a) Damages if any, caused due to poor workmanship shall be made good by the contractor at his own cost to match with the existing complete without any extra cost to the department.

Deduct Schedule of Credit of Rs 85875.00 as brought out from serial page No 27 of tender

SCHEDULE OF CREDIT

1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB

2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on "Schedule of credit" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount.

3. The total credit amount may vary as per execution of work above different items involved in this credit schedule.

4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified.

5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained

Srl No

Rate in (Rs)

Old unserviceable brick bats

Oldunserviceable floor hearth tiling any type / any size

Old unserviceable steel/ironchain link fencing etc

Old unserviceable drain / man holes cover

Old unserviceable steel/iron scrap etc

Total amount of credit schedule

Signature of contractor

For ACCEPTING OFFICER