Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹19.4 L+₹2.6 L (15.2%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹19.7 L+₹2.8 L (16.8%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹23.0 L+₹6.2 L (36.7%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST |
Tender Value
₹22.2 L
EMD Value
₹44,400
Closing Date
9 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ABOHAR
GE ABOHAR
Comprehensive B/R and E/M repairs to OTM and Married Accommodation in Zone I at Military Station Fazilka
2022_MES_542028_2
GE ABH-27/22-23
Open Tender
Civil Works
Item Rate
300 days
ge abohar
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE ABOHAR
₹44,400
Yes
28 Oct 2022
19 Aug 2022
12 Sept 2022
19 Aug 2022
9 Sept 2022
26 Aug 2022
Amount
SCHEDULE 'A' SECTION I (B&R Portion)
Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified and directed.
Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each and refixing the shutter in same opening all as specified and directed.
Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each and removing to store yard all as specified and directed by Engineer-in-Charge.
Refixing of shutter in other opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed.
S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.
S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge.
S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge.
S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made
S&F 18mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification including fitting i.e. magnetic catcher,stainless steel handle approved by Engineer -in-Charge.
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm all as specified and directed by Engineer - in - Charge .
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm all as specified and directed by Engineer - in - Charge .
M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge.
S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified.
S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge.
M&L 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.
M&L 18/19 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.
S&F Aluminium handle cast type anodized 150 mm long all as specified and directed by Engineer-in-Charge.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engineer - in - Charge.
M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.
S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.
S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S & F drapery curtain rod, mild steel, powder coated 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge .
Hacking out old broken glass (any size,thickness,quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified & directed by Engineer -in-charge.
S & F in 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in-Charge.
S & F 3 mm thick pin headed sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge.
S & F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge.
S & F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed.
S&F 100 mm size hasp and staple,safety type,Stainless steel bright finish ,including bolt to hinge plate and fixed with screws,complete all as directed.
Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.
M & L 10mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.
M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.
M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
Material & labour for preparation of old decorated (platered or unplastered) of walls and applying one coats of oil bound distemper complete all as specified & directed by Engineer -in-charge.
M & L applying one coat of cement based paint on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.
M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface,including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete complete all as specified and directed.
M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of exterior grade wall putty and making it smooth with sand paper by mechanical method then applying two coats of weather proof exterior emulsion over a coat of exterior primer complete all as specified and as directed by Engineer-in-Charge.
Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge..
M&L 18- 20mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite.
M&L 18-20mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specfied and directed.
Cutting ,grinding ,cleaning and treating the surface of existing kota stone flooring with beeswax polishing complete as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises.
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
M & L for glazed ceramic coloured tiles 7mm thick 300 x 200mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 10mm thick cement sand plaster (1:4) complete all as specified and directed by Engineer - in - Charge.
M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all as specified.
M&L cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floors 25 mm thick for tiles all as specified.& directed by Engineer -in-charge..
Demolition of cement concrete ( un re-inforced) of any description in ground floor and pavings Nexc15 cm thickness (below or above GL)
M & L runnung welding in repairs thickness of metal exc 6mm n exc 9mm
S&F anodised aluminium frame for doors , window , ventilatores with with one or more rebate including joiing cleat forfixing etc . complete all as specified.
S&F anodised aluminium door shutter , aluminium section wt 0.55 kg / mtr including necessary joining cleats ,glazing clips, rubber eoprene packing , handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc.
S&F anodised aluminium window / ventiletor shutter , side hung type without sash bar ,aluminium section wt 0.55 kg / mtr including necessary joining cleats , glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150 mm long (1 No.) hingestype B-21 100mm long (2 Nos. )suitable handle (1 No) complete allas specified .
S&F anodised aluminium grill of daimond size 100x100mm of dia 6mm including necessary joining cleats , anodised aluminium snap beading screws , complete all as specified .
S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
S&F in repairs door closer hydraulically regulated, aluminium (Die cast) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width complete all as specified and as directed.
M&L in repairs Aluminium Motrice lock 4 levers and 75mm size for aluminium doors
S&F for Alum door stopper of any descripion all as specified and directed by Engineer-in-charge.
S&F door seal PVC 30mm wide with foam complete all as specified & directed by Engineer-in-Charge.
Taking down and refixing of alum window shutters of any size in same opening incl repairs /replacement of rubber packing,glass,glazing clips & aluminium section etc (The item glass,glazing clips & alum section will be measured seperately)
Taking down aluminium door shutter ,Refixing of shutters of any size in same opening incl repairs / replacement of rubber packing,glass,glazing clips & aluminium section etc after tightening of members, adjusting of door closure etc. complete all as specified and directed (The item glass,glazing clips & alum section will be measured seperately)
Taking down and refixing of rolling shutters including greasing,oiling,repairs/replacement of part of any size exc 3.00 sqm but not exc 7.5 sqm area ( the defective parts to be seperately in concern items )
Supply of 1.25mm thick MS sheet laths complete all as specified & directed by Engineer-in-charge.
Supply of MS gear pully suitable for rolling shutter of any size complete all as specified & directed by Engineer-in-charge.
Supply of tension spring suitable for rolling shutter of any size all as specified & directed by Engineer-in-charge.
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
M&L brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 all as specified and directed.
M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed.
S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed .Make : ESS ESS ,Hindware ,Jaquar or equivalent.
S&F sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed. Make : ESS ESS ,Hindware ,Jaquar or equivalent.
S & F in repairs brass chromium plated wall mixer with non telephonic shower arrangement for mixing hot and cold water screwed down for iron pipe and fixed as directed. Make : ESS ESS ,Hindware ,Jaquar or equivalent.
S & F in repairs 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified.
S & F in repairs 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .
S&F in repairs 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed.
S/F in repairs pillar taps 15mm bore fancy type chromium plated cast copper alloy with capstan heads scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe . ISI marked.
S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement.
S&F in repair PVC connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by Engineer-in-Charge.
S&F PVC waste pipe 32mm dia & 90 cm long all as specified and directed by Engineer-in-Charge
S & F in repairs glass corner shelf assembly fancy type made 8 mm thickn sheet glass of size 300x300mm fixed with 'F' or 'D' type brass CP brackets complete all as specified.
S & F in repairs towel rails 16 mm dia 600 mm long superior quality brass chromium plated fancy type Complete all as specified fixed in repairs.
S & F in repairs for brass chromium plated shower rose 125 x 125 mm size with swivel joint including fixing to 15 mm dia steel pipe or union.
S&F in repairs soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.
S&F Chromium plated health faucet 1 mtr long fixed with screws complete all as specified and directed.
S&F EWC Jet spray complete all as specified and directed.
Dismantling water tanks and removing to store of exc 250 nexc 500 ltr capacity
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .
Dismantling water tanks and removing to store of exc 500 nexc 1000 ltr capacity
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed.
M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.
M&L in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.
S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed.
S&F in repair PVC low level flushing system 10 Ltr capacity with flush pipe complete as approved by Eng-in charge.
S&F in repair Viterous China squating pan Orrisa pattern size 580/440mm wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete.
S&F in repair vitreous china,white wash hand basin ,pedestal type, flat back size 550x400mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair plastic water closet seat, white closed patern withflat bottom and cover and mild steelcromium plated or aluminium hinging device
Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge .
S & F 110mm PVC (SWR) pipes and single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Fixing only PVC (SWR) pipes of size 110 mm of any length with rubber ring joints fixed to wall complete with all fittings all as specified & directed by Engineer-in-charge.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.
S&F PVC (SWR) floor trap 100/75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4
S & F 100mm bore stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed.
Dismantling of CI pips or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.
Dismantling of CI pips or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.
S&F in repairs 100 mm dia. cast iron waste and vent pipe in any length with or without ear with cement joints fixed to wall.
S&F in repairs 75mm dia cast iron waste and vent pipe in any length with or without ear with cement joints fixed in repairs to wall .
S & F in repairs CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured).
S & F in repairs CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with access door.
S & F in repairs CI branch pieces single 100mm dia (equal or unequal), ordinary or inverted or with parallel branches, with access door, complete all as specified.
S & F in repairs CI branch pieces single 75mm dia (equal or unequal), ordinary or inverted or with parallel branches, with access door, complete all as specified.
S&F CI 'P' or 'S' trap of 100mm size all as specified and directed by engineer-in-charge.
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store
Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store
S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. Make : Supreme/Vectus or equivalent
Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.
S & F structural steel work rolled mild steel joist, channel,angle,or Tee sections, fixed independently conforming to Fe 410-W all as specified .
Desmantling plain, coraugated steel sheeting any guage, thickness including nanital or similar pattern roof covering.
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
S & F false ceiling not less than 9 mm thick gypsum tiles (600mm x 600 mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/hangers 4 mm dia. GI wire (upto 1200 mm length) adjusting level fixed to roof slabs/trusses complete all as specified and as directed by Engineer-in-Charge. Make : Saint Gobain / Armstrong/Everest
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.
M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.
M & L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note : Quantity will be measured perimeter of wall x depth of penetration.
M & L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, seismic and other similar bands, benching, coping, bed blocks, apex stones and kerbs etc including use of necessary form work all as specified and directed by Engineer - in - Charge .
S & F in repairs water tank cover of any description all as specified and directed by Engineer-in-Charge.
S&F in repairs stainless steel sink overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as directed.
S & F in repairs stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge.
M&L 50mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement.
S&F in repairs PVC bathroom cabinet mirror 450 x 350 mm complete all as specified and directed by Engr-in-charge.Make:-Prayag cat part no551/polytuf/shakti/pearl as approved by GE.
SCHEDULE 'A' SECTION-II (E&M PORTION)
Taking down carefully any type point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing ( Except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing.
M&L point wiring (CONCEALED) for using 1.5 sqmm nominal cross sectional area copper conductor multistranded ,PVC insulated unsheathed , FRLS cables in and including using PVC conduits not les than 20 mm dia and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS and making good all disturbed work to match the existing for One light/fan point controlled by one 5 Amps one way switch and all as specified and brass screws, washers etc. complete all as specified.
All as per Item No. 153 here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No. 153 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No. 153 here in before but for One light point controlled by two 2-way switches of 5 amps
All as per Item No. 153 here in before but for One bell point controlled by one bell push.
Description all as per item No 153 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 1.5 Sqmm, 1100V grade in Existing concealed conduit, and one run PVC FRLS insulated unsheathed copper conductor of size 1.5 Sqmm as earth continuity wire and connected to common earth dolly using color code as per IS and all as specified with copper lugs/timbles inserted in existing MS boards/boxes complete heavy duty for housing switches, , regulators, bell push etc, and making good all disturbed work to match the existing for One light / fan point controlled by one way piano switch 5 Amp. and complete all as specified and directed.
All as per Item No. 159 here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No. 159 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No. 159 here in before but for One light point controlled by two 2-way switches of 5 amps
All as per ItemNo. 159 here in before but for One bell point controlled byh one bell push
Description all as per item No. 159 here in before but in existing conceales for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
M&L point wiring for using 1.5 sqmm nominal cross sectional area copper conductor multistranded ,PVC insulated unsheathed , FRLS cables in and including Surface PVC casing and caping and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS and making good all disturbed work to match the existing and all as specified and brass screws, washers etc. complete for One light/fan point controlled by one 5 Amps one way switch all as specified.
All as per Item No. 165 here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No. 165 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No. 165 here in before but for One light point controlled by two 2-way switches of 5 amps
All as per Item No. 165 here in before but for One bell point controlled byh one bell push.
Description all as per item No. 165 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and all as specified complete all as specified and directed.
S & F switch piano one way 5/6 amps 240 volts complete all as specified and directed.
S & F Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified.
S & F Bell ding dong AC, 230 Volts, Single pole complete all as specified.
S & F socket 5 in 1, 5 amps flush type complete all as specifeid.
S & F socket 5 in 1, 5/16 amps flush type complete all as specifeid.
S & F switch piano flush type 5 amps but 2 way type complete all as specified.
S & F switch piano one way 15 amps 240 volts complete all as specified and directed.
M & L lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including provision of 12/15 Watt LED bulb complete, Make- Anchor/SSK/CONA
M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, iwsolated body complete, Make-Anchor/SSK/CONA
Supply only fan regulator electronic (socket) type, single phase, 230Volt complete all as specified and directed Make: Anchor/Cona and equivalent make
M & L Point wiring (CONCEALED) complete with ISI marked 1.5 Sqmm single core PVC insulated unsheathed cable 1100 Volts grade with multistranded copper conductor drawn through in and including medium grade PVC conduit not less tah 20 mm dia and accessories in wall/roof/ceiling surface etc suitable for modular plates including terminal boxes suitable for fixing modular switches, sockets etc and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly using color code as per IS and making good all disturbed work to match the existing and all as specified complete for One light/fan point controlled by one 5 Amps one way switch all as directed :- (Note - Accessories like modular metal boxes, inner & outer plates will be paid and measured separately in respective items of schedule)
All as per Item No. 181 here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No. 181 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No. 181 here in before but for One light point controlled by two 2-way switches of 5 amps
All as per Item No. 181 here in before but for One bell point controlled by one bell push
Description all as per item No. No. 181 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and all as specified complete all as specified and directed.
S & F modular switch 1 way 6 amps, 1 module complete all as directed by Engr-in-chrage.
S & F modular switch 1 way 16 amps, 1 module complete all as directed by Engr-in-chrage.
S & F modular switch 2 way 6 amps, 1 module complete all as directed by Engr-in-chrage.
S & F modular bell push 6 amps, 1 module complete all as directed by Engr-in-chrage.
S & F modular sockets 6 amps, 2/3 pin combined two module complete all as directed by Engr-in-chrage.
S & F modular sockets 6/16 amps, 2/3 pin combined two module complete all as directed by Engr-in-chrage.
S & F Modular Buzzer, Ding Dong AC. 230 volts, single pole
S & F Modular Bell, AC, 230 volts, single pole
S & F modular fan regulator, step type, 120 watts, W-2 module complete all as directed by Engr-in-chrage.
M&L for submain wiring comprising single core ,4 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings/existing concealed conduit complete, including provision of 2 x 6 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)
Description all as per item No 196 here in before but 4 Runs of 6 sqmm complete in PVC conduits/PVC casing and caping and fittings complete all as specified.
Description all as per item No 196 here in before but 4 Runs of 6 sqmm in and its fittings complete all as specified.
Description all as per item No 196 here in before but ,2 Runs of 6 sqmm in PVC casing and caping and its fittings complete all as specified.
S&F sheet metal enclouser VTPN/HTPN DB having facility to fix MCCB incomer upto 250 Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates including making good disturbed surfaces after taking out old unserviceable DB complete all as specified and directed. make- Indo Asian Model No: 811893 Legrand/L&T Hager/C&S/INDO KOPP/Standard/Havells
All as per Item No 200 above here-in-before but TPN DB 6 Way double door type complete all as specified and directed make- Indo Asian Model No: 811894 or equvalent makes of- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells
Supply and fixing MCCB TPN ( 4 pole) 63 Amps 415 Volts of braking capacity 36 KA (Adjustable Thermal and Adjustable Magnetic Release Setting) complete taking down old unserviceable one and making necessary connections as existing and cleaning the terminals with CTC solutions complete all as specified and directed. Make :IndoAsian Cat No: 830330 to 830335 or equvalent of Havells/LegrandSchneider/HPL/Standard
All as per Srl Item No 202 here-in-before but 100 Amps with braking capacity 36 KA.
All as per Srl Item No 202 here-in-before but 125 Amps with braking capacity 36 KA.
All as per Srl Item No 202 here-in-before but 160 Amps with braking capacity 36 KA.
All as per Srl Item No 202 here-in-before but 200 Amps with braking capacity 36 KA.
Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser TPN DB having facility to fix MCCB incomer upto 125Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill ptorector and blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells
Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 12 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells
Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 8 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells
Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 4 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells
S&F PVC enclouser SPN DB 2 way having facility to fix MCB DP/SPN 2 ways complete fitted with bus bars, neutral links including provision of MCB DP 6-16A and making good disturbed surface area complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/Topson
Supply and fixing Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells Schneider/C&S)
Supply and fixing Plug top type 20 Amps 2P+E, 230 Volt capacity of plug top and earth plug, complete all as specified. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells Schneider/C&S)
Supply and fixing AC socket type 20 Amps 2P+E, 230 Volt capacity of Socket with safety cap complete all as specified. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells Schneider/C&S)
Supplied and fixed Miniature circuit breaker (MCB), single pole, 240 Volts, of 6-32 amps current rating and 10 KA breaking capacity, B' series type complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)
Supplied and fixed Isolator TPN, 415 Volts, of 63 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)
Supplied and fixed Isolator TPN, 415 Volts, of 100 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)
Supplied and fixed Isolator, Double pole, 240 Volts, of 32 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)
Supplied and fixed Isolator, Double pole, 240 Volts, of 40 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)
Supplied and fixed Isolator, Double pole, 240 Volts, of 63 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)
Dismantling and taking down Street/bldg sec light fitting of single/double of any wattage or size street light fittings
M&L LED tube light fixture with batten fitting, environmental friendly energy efficient ready to use 18/20W LED 6500K and above (4') complete all as specified and directed by Engr-In-charge. Make:Syska PriceSSK-ALB-20W I & SSK-TL-20W I or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.
S & F LED street light luminaries 30 watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25 mm dia medium grade pipe (60 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm-2 Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska max glow series SSK-MST 15W or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.
M&L for LED Batten with LED tube light integrated LED channel of capacity 05 Watt white colour complete all as specified and directed by Engr-In-charge. Make:Bajaj BCLSB 05WH or equavlent of Havells/Crompton Greaves/ Philips/Wipro/Syska/Polycab as recommended by Engr-Incharge and approved by GE.
M&L for LED Batten with LED tube light integrated LED channel of capacity 10 Watt white colour complete all as specified and directed by Engr-In-charge. Make: Bajaj BCLSB 10WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska/Polycab as recommended by Engr-Incharge and approved by GE.
M&L for Skylux LED efficient LED surface 2'x2' luminaire & glare free soft illumination of capacity 36Watt LED white colour complete all as specified and directed by Engr-In-charge. Make:Bajaj BZSSQL 36W LED WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska as recommended by Engr-Incharge and approved by GE.
M&L for series of downlighters of capacity 12/15 Watt with low depth square powder coated white finish with drop down PC diffuser to deliver low glare ilumination with optimized heat sink fo efficient heat dissipation and separate replaceable electronic driver suitable for office & retail spaces complete all as specified and directed by Engr-InCharge Make:SYSKA SSK_SDS12W-N or equivalent in Havlls/Crompton Greaves/Bajaj/ Philips/Wipro as approved by GE.
M&L for Galaxy LED suspended type decorative LED low bay luminaasire white colour of capacity 24 Watt complete all as specified and directed by Engr-InCharge Make: Bajaj BLSPD LED 24W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
M&L for LED building street light luminaire of capacity 25/30 Watt with pressure die-cast housing with individual LEDs as light source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK 07 Make: Bajaj BRLEPLED 20W LED V2 or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as spd and dir by Engr-in-charge.
S&F of air freshner pvc exhaust fan of 250-300mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit fixing in wall and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified and directed by Engg-in- Charge.
M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item).
Supplying, fixing,testing,& commissioning intergal decorative LED bollard light with opal acrylic with IP-65 protection with accessories complete all as specified and directed by Engr-in-Charge. Make : Bajaj Model No. BGBOM 650 9W LED (or) equivalent model of make Philips/Crompton Greaves/Havells as approved by GE.
Supply and fixing LED post top lantern fitting cast aluminium witth decorative opal polycarbonate diffuser of capacity 40 Watt with IP-65 protection Bajaj : BGCL 40 W LED WH
Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying under ground cable in loose/soft soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm.
Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.
M&L for sand cushioning for protection of PVC cable with screen wash river sand and punning to proper required cover.
M&L for 40mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)
M&L for 50mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)
M&L for bricks of sub class ‘B’ bricks, for cable protection in trenches laid dry and flat.
M&L for Boring hole across the Road/plinth/hardstanding/path/drain/pavement etc., suitable for inserting HDPE/GI pipe of upto 100mm dia bore pipe for cable passing without damaging existing Raod/path/hardstanding/floor by manual using trenchless technology tools/necessary equipment complete all as specified and directed.Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)
S&F 1.5 sqmm 3 core, 1100 volt grade heavy duty cable, PVC insulated copper multistranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed for making connection Of bldg street lights/fan/garden lights complete all as specified and directed
Supply only aluminium lugs suitable for cable of size 10 to 16 sqmm complete all as specified and directed.
Supply only aluminium lugs suitable for cable of size 25 sqmm complete all as specified and directed.
S&F cable straight through jointing kit for LT, 1100 Volt (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 6 sqmm to 70 sqmm. Make: Denson/3M
Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core complete connections and inlcuding provision of cable lugs,glands for both end connections complete taking down unserviceable cable all as specified.
All as per Srl item No. 228 here in before but of size cross sectional area 16 sqmm 2 core
All as per Srl item No. 228 here in before but of size cross sectional area 25 sqmm 2 core
Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 4 core complete connections and inlcuding provision of cable lugs,glands for both end connections complete taking down unserviceable cable all as specified.
All as per Srl item No. 231 here in before but of size cross-sectional area 10 sq. mm 4 core
All as per Srl item No. 231 here in before but of size cross-sectional area 16 sq. mm 4 core
All as per Srl item No. 231 here in before but of size cross-sectional area 25 sq. mm 4 core
KATARIA CONSTRUCTION
G S CONSTRUCTIONS
MANCHANDA CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .