PROVISION OF THREE TIER WASHING POINT AND CERTAIN B/R WORKS AT SNCOS MESS AT AFS AMLA

Amount

S&F stainless steel of grade SS304, SS316, etc, with minimum 8.2mm thickness, three tier washing bay of min size 1800mm x 60mm x 86mm, silver in colour, four legs, rectangular bowl in shape, smooth surface finish including three CP swan neck pillar tap, waster coupling and outlet drainage system including all fittings complete all as specified and directed. Model No SS3105-24 or equivalent (Blue Star), 1077.

S&F vitreous china table top wash hand basin snow white in square or rectangular in shape of size 605x395x120mm/ 560x360x130mm including Waste coupling (CERA Cat No 8050351CH) with ceramic pop-up push type (full thread) 32 mm including Pillar cock with swan neck spout (left/right) and aerato (CERA Cat No F2002104 (Left)) 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with screwed and removing debris out of MoD land complete all as specified and directed. Make : CERA Cat Part No S2020141 (CERA (Ceona), S2020176, Prayag Cat No 4805, 4806, Hindware : 91207, 91101

S&F vitreous china wash hand basin white flat back size 550mmx400mm excluding taps waste chain and plug and percelain stopper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surfaces of breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land complete all as specified and directed.

M&L for machine cut kota stone slab 20-25mm thick (size of each stone in single piece, laid on vertical surfaces of skirting/dado, over and including 15 mm thick rendering in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.

M&L for digital coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 300 x 7 to 8 mm thick, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in 1:4 cement mortar complete all as specified and directed.

M&L for Granite (Z Black) 18 to 20 mm thick table rubbed & polished in steps , jambs, cills, shelves, chowkats etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed .

M & L 60mm thick factory made chamfered edge cement Concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including packing of both sides with PCC 1:2:4, complete all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging fastening and fixing complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; hold fast, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation new painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed

M & L for cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1, depth exceeding half brick but n. exc one brick complete all as specified and directed.

S&F 15mm dia bore GI tubing medium grade, galvanised with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed.

M&L for brick work with Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finish complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, bends fixed in wall or floor complete all as specified and as directed.

S&F collapsible waste pipe of size 31/32 x 800 mm, fixed to waste fittings ,complete all as specified and directed.

M&L for reinforcement cement concrete slabs type B1 1:2:4 (20mm graded aggregate), supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for Mild steel TMT bars10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, Complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws Complete all as specified and directed.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet ,wall hung type complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for soft / loose soil and removing surplus soil to a distance n.exc 50mtr and making good surface in soft/loose soil complete all as specified and directed.

M&L for cement conrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Shri Sai Enterprises (BID ID -3486578)

Vee kay construction (BID ID -3481287)

M/s SHAKTI INFRASTRUCTURE (BID ID -3486869)

RAJBAITHE CONSTRUCTION COMPANY (BID ID -3484457)