Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹42.3 L+₹2.0 L (5.05%)Rejected-Finance NO 943 0 56 VILL PO PATHRERI TEH KOTPUTLI DIST JAIPUR RAJASTHAN 303 107 | JAIPUR | RAJASTHAN | 303107 | L2 | Rejected-Finance Being Other than Lowest Tenderer | |
| 3 | L3₹43.7 L+₹3.5 L (8.65%)Rejected-Finance | L3 | Rejected-Finance Being Other than Lowest Tenderer |
| Sl No | Description | Qty | Unit | SRISHTI CONSTRUCTIONS L1 | VIPUL CONSTRUCTION COMPANY L2 | shubham construction L3 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down the unserviceable shutter motor of any capacity from the top of shutter at any height including all fittings wirings etc complete all as specified and directed by Eng-in-Charge | 39 | Each Job | 200 ₹7,800 Lowest | 1,000 ₹39,000 | 4,850 ₹1,89,150 |
| 2.00 | Taking down the unserviceable motorised MS door motor of any capacity from the bottom or centre of the door at any height including all fittings wirings etc complete all as specified and directed by Eng-in-Charge | 2 | Each Job | 200 ₹400 Lowest | 1,000 ₹2,000 | 4,850 ₹9,700 |
| 3.00 | Supply, installation, testing and commissioning of the swiftroll rolling shutter motor of capacity 0.5 HP dual operation (reverse/forward) motor, single phase, 50 Hz, 230 Volts including bracket , chain, limit switch, operation switch and box ss finish, brake system, gear box , copper winding, silver finish, non drive side bracket including shaft, bearing assembly, nut bolts, drive side chain etc including motor protection enclosure made out of MS sheet of thickness 2 mm and painting with two coat of synthetic paint over a coat of red oxide including all fittings wirings with suitable size coper conductor cable etc complete all as specified and directed by Eng-in-Charge.Note: (i) The cost for fixing of shutter motor at any height will be deemed in the quoted rate. (ii) Any modification required for smooth functioning of door will be carried out by the contractor and all rates are deemed in the quoted rates. | 13 | Each Job | 32,000 ₹4,16,000 | 45,000 ₹5,85,000 | 18,000 ₹2,34,000 Lowest |
| 4.00 | Supply, installation, testing and commissioning of the swiftroll rolling shutter motor of capacity 0.75 HP dual operation (reverse/forward) motor, single phase, 50 Hz, 230 Volts including bracket , chain, limit switch, operation switch and box ss finish, brake system, gear box , copper winding, silver finish, non drive side bracket including shaft, bearing assembly, nut bolts, drive side chain etc including motor protection enclosure made out of MS sheet of thickness 2 mm and painting with two coat of synthetic paint over a coat of red oxide including all fittings wirings with suitable size coper conductor cable etc complete all as specified and directed by Eng-in-Charge.Note: (i) The cost for fixing of shutter motor at any height will be deemed in the quoted rate. (ii) Any modification required for smooth functioning of door will be carried out by the contractor and all rates are deemed in the quoted rates. | 9 | Each Job | 36,000 ₹3,24,000 | 65,000 ₹5,85,000 | 18,000 ₹1,62,000 Lowest |
| 5.00 | Supply, installation, testing and commissioning of the swiftroll rolling shutter motor of capacity 1.0 HP dual operation (reverse/forward) motor single phase, 50 Hz, 230 Volts including bracket , chain, limit switch, operation switch and box ss finish,brake system, gear box , copper winding, silver finish, non drive side bracket including shaft, bearing assembly, nut bolts, drive side chain etcincluding motor protection enclosure made out of MS sheet of thickness 2 mm and painting with two coat of synthetic paint over a coat of red oxide including all fittings wirings with suitable size coper conductor cable etc complete all as specified and directed by Eng-in-Charge.Note: (i) The cost for fixing of shutter motor at any height will be deemed in the quoted rate.(ii) Any modification required for smooth functioning of door will be carried out by the contractor and all rates are deemed in the quoted rates. | 7 | Each Job | 41,000 ₹2,87,000 | 75,000 ₹5,25,000 | 18,000 ₹1,26,000 Lowest |
| 6.00 | Supply, installation, testing and commissioning of the swiftroll rolling shutter motor of capacity 1.5 HP dual operation (reverse/forward)motor single phase, 50 Hz, 230 Volts including bracket , chain, limit switch, operation switch and box ss finish,brake system, gear box , copper winding, silver finish, non drive side bracket including shaft, bearing assembly, nut bolts, drive side chain etcincluding motor protection enclosure made out of MS sheet of thickness 2 mm and painting with two coat of synthetic paint over a coat of red oxide including all fittings wirings with suitable size coper conductor cable etc complete all as specified and directed by Eng-in-Charge.Note: (i) The cost for fixing of shutter motor at any height will be deemed in the quoted rate. (ii) Any modification required for smooth functioning of door will be carried out by the contractor and all rates are deemed in the quoted rates. | 5 | Each Job | 45,600 ₹2,28,000 | 75,000 ₹3,75,000 | 33,000 ₹1,65,000 Lowest |
| 7.00 | Supply, installation, testing and commissioning of the swiftroll rolling shutter motor of capacity 2.0 HP dual operation (reverse/forward) motor single phase, 50 Hz, 230 Volts including bracket , chain, limit switch, operation switch and box ss finish,brake system, gear box , copper winding, silver finish, non drive side bracket including shaft, bearing assembly, nut bolts, drive side chain etcincluding motor protection enclosure made out of MS sheet of thickness 2 mm and painting with two coat of synthetic paint over a coat of red oxide including all fittings wirings with suitable size coper conductor cable etc complete all as specified and directed by Eng-in-Charge.Note: (i) The cost for fixing of shutter motor at any height will be deemed in the quoted rate. (ii) Any modification required for smooth functioning of door will be carried out by the contractor and all rates are deemed in the quoted rates. | 5 | Each Job | 48,000 ₹2,40,000 | 95,000 ₹4,75,000 | 44,500 ₹2,22,500 Lowest |
| 8.00 | Material and labour for servicing of shutter motor, gear box, MS rod etc including greasing, cleaning all parts etc complete all as specified. | 39 | Each Job | 2,200 ₹85,800 Lowest | 4,500 ₹1,75,500 | 11,980 ₹4,67,220 |
| 9.00 | Material and labour for replacement of mild steel rod of size 25 mm dia solid rod including threading on lathe machine and fixing in position at any height and testing etc complete all as specified. | 36 | RM | 2,200 ₹79,200 | 450 ₹16,200 Lowest | 1,702 ₹61,272 |
| 10.00 | Material and labour for replacement of mild steel rod of size 32 mm dia solid rod including threading on lathe machine and fixing in position at any height and testing etc complete all as specified. | 42 | RM | 2,200 ₹92,400 | 450 ₹18,900 Lowest | 1,899 ₹79,758 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Dec 2025, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL ANIL KUMAR S
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8253 REPAIR AND MAINTENANCE OF ROLLING SHUTTER MOTOR, GEAR AND CONNECTED ITEMS OF NAVAL DOCKYARD UNDER GE (NW) KUNJALI
2025_MES_743348_1
8253/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹90,000
Yes
5 Feb 2026
6 Dec 2025
29 Dec 2025
12 Dec 2025
27 Dec 2025
20 Dec 2025
6 Dec 2025 - 12 Dec 2025
Taking down the unserviceable shutter motor of any capacity from the top of shutter at any height including all fittings wirings etc complete all as specified and directed by Eng-in-Charge
Material and labour for servicing of shutter motor, gear box, MS rod etc including greasing, cleaning all parts etc complete all as specified.
Taking down of old unserviceable cable of any size and supply and fixing of copper conductor 10 sqmm 4 core multistranded cable PVC insulated unarmoured complete all as specified and directed.
Taking down of old unserviceable cable of any size and supply and fixing of copper conductor 6 sqmm 4 core multistranded cable PVC insulated unarmoured complete all as specified and directed.
Taking down of old unserviceable cable of any size and supply and fixing of copper conductor 4 sqmm 4 core multistranded cable PVC insulated unarmoured complete all as specified and directed.
Taking down of old unserviceable cable of any size and supply and fixing of copper conductor 16 sqmm 4 core multistranded cable PVC insulated unarmoured complete all as specified and directed.
Taking down the unserviceable motorised rolling shutter of any size any height including all fittings wirings etc complete all as specified and directed by Eng-in-Charge
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
8253TENDERDOCUMENTS.pdf
Tender Documents • 1.33 MB
BOQ_832365.xls
BOQ • 26.93 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .