8870/E8

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n.exc 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description but exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 160 of SSR Part -II complete all as specified and directed.

S&F factory made solid PVC Moulded Door Shutter, With Particle Board Core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing on page no. 161 of SSR Part -II complete all as specified and directed.

S&F factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003(Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed.

S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed .

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .

M&L for 5 mm thick rendering on brick or concrete surfaces of ceiling in CM 1:3 and finished even and smooth without using extra cement complete all as directed.

M&L preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in screed bed of tiles.

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

M&L coloured Glazed ceramic tiles 450x 300x 7 mm / 450X 350X 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. (Note : Backing layer shall be measured and paid separately under respective items in this schedule).

M&L Vitrified Ceramic tiles 10mm thick (Square or Rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors, set and Jointed in neat cement slurry and pointed in coloured cement to match the tiles, complete all as specified and as directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule)

M&L Vitrified Ceramic tiles 10mm thick (Square or Rectangular) polished area of each tiles not exceeding 0.36 Sqm, in skirting / dado, set and Jointed in neat cement slurry and pointed in coloured cement to match the tiles, complete all as specified and as directed. (Note : Backing layer shall be measured and paid separately under respective items in this schedule)

Supply and fixing door closer hydraulically regulated designation No. 1 universal type cast iron body, (diecast) suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kgs complete all as specified and directed including taking down old one.

S&F stainless steel sink made out of 1 mm thick sheet for kitchen or laboratory, with plug washers and waste coupling including fixed with cantilever brackets and connecting union to pipe overall size 485 mm x 410 mm, bowl size 410 mm x 355 mm x 165 mm complete all as specified and directed including taking down old one. ( Make Nirali, Popular Range, Model name- Grace Plain small, glossy finish or equivalent)

S&F stainless steel sink with draining board, made out of 1 mm thick sheet for kitchen or laboratory, with plug washers and waste including fixed with cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 355 mm x 175 mm complete all as specified and directed including taking out old one.( Make Nirali, Popular Range, Model name- Elegance, small, glossy finish or equivalent)

Taking down aluminium window / ventilators with side hung, top hung and fixed type, sliding shutters of any description complete all as specified and directed.

S&F powder coated anodised aluminium window / ventilator shutters, side hung type with styles, rails, sash bar all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, etc complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle exc 0.5 Sqm in each pan all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including down old one.

S&F anodised aluminium grill, having mess size 75mmx75mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers each side insert into the jamb / cill including taking down old one complete all as specified and directed.

S&F tubular/towel rail 20 mm dia brass chromium plated 'D' type 60 cm long between flange brass CP fixed with and incl chromium plated brass screws and wooden plastic cleats all as specified and directed including taking down old one. (Make : Jaquar model no ACN-1111NM or equivalent)

Scrapping worn out tarfelt and bituminous compound of water proofing treatment over RCC roof by using wire brush and blow lamps including dismantling cracked/broken PCC (if required sweeping, cleaning washing down to remove dust etc and removing rubbish debris etc to a distance n.exc 50 m from the site (s) complete all as specified & directed.

M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps. (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M&L CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed.

Taking up or down 25mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Supplying and laying of 25mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed .

M&L UPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 25 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed.

S&F in repairs wall mixer, with provision for both hand shower a complete with 115mm long bend Pipe, connecting Legs & wall flange cast copper alloy, screwed down, high pressure (chromium plated) complete for fixing with 15 mm dia pipe, complete all as specified and directed . (Make Jaquar code no FUS-29119 or equivalent).

S&F in repairs angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed . (Make : Jaquar model no FUS-29053 or equivalent)

S&F in repairs 15 mm two way bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make : Jaquar model no FUS-29041 or equivalent )

S&F in repairs wash basin mixture with popup waste system & 450mm long braided houses complete all as specified and directed . (Make : Jaquar model no FUS-29023B or equivalent)

S&F 15 mm bib cock with wall flange complete all as specified and directed including taking down old one. (Make : Jaquar model no FUS-29037 or equivalent)

S&F in repairs single lever sink mixer, with swinging spout on upper side (wall mounted model) with connecting Legs & wall flange complete all as specified and directed . (Make Jaquar code no FUS-29165 or equivalent).

S&F in repairs chromium plated hand shower 125mm round shape single flow with ABS body rubbit cleaning system complete all as specified and directed . (Make Jaquar code no HSH-1937 or equivalent ).

S&F chromium plated hand shower helth faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one. (Make Jaquar code no ALD-CHR-585 or equivalent)

S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one (Make Parryware, Model -slimline economy or equivalent).

M & L for complete removal of existing treatment of walls and applying two coats of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed.

S&F galvanised iron snap grid frame work made from galvanised iron main /cross tee of size 38 mm x 24 mm x 0.32 mm weighing 0.28Kg/RM and 28 mm x 24 mm x 0.30 mm weighing 0.22 Kg/RM respectively for false ceiling of grid size 600 mm x 600 mm including necessary hanging arrangement comprising of 4 mm dia MS rod, 'J' bolts with necessary bolts, nuts and washer all as per manufacturer's instruction complete all as specified and as directed. The snap grid (main & cross section) shall supported at ends all along the wall with galvanised iron angle of size 22 mm x 22 mm x 0.40 mm weighing 0.15 Kg/RM complete as per manufacturer's instruction and as specified and directed including taking down old one.

M&L for providing pre painted fiber cement board 6 mm thick in ceiling fixed on GI snap grid as per manufacturer's instruction including taking down old one complete all as specified and as directed.

S&F brass chromium plated grating round of size 125mm of approved design complete all as specified and as directed including taking out old one.

S&F waste coupling of CP half or full threaded with 32 mm dia complete all as specified and directed including taking out old one.(Make Jaquar code no ALD-709 or equivalent )

UNIVERSAL TRADING CENTRE

M/S J S ENTERPRISES

MS HORIZEN

UJJAL ELECTRIC

MS AP CONSTRUTION AND CO

ARJUN DAS VALECHA

SPECIAL CONCRETE AND CONSTRUCTION CO.