PROVN OF WEATHER SHELTER SHED PARKING SHED AT AF STN PANAGARH

Amount

NOTE FOR SHED OF DG SET: The work covered under Srl No 1.2(a) at Srl Page No 14(R) (ie Provision of weather shed for DG Set) consist of design/drawing and vetting of shed from NIT/Govt Engg College. The quoted rate shall be inclusive of design, drawing & vetting of shed alongwith submission of 04 (four) sets of vetted drawings to GE (AF) Panagarh. It shall be noted that before vetting the drawing, one set of designed drawing alongwith calculation shall be submitted to GE for their comments. The GE shall fwd the comments, if any within 10 days of submission by the contractor. The contractor shall carry out this aspect within 30 days of issue of work order No.1. The quoted rate of respective items inclusive of all as stated above & no additional claim shall be entertained later on. A copy of tentative drawing No CWE(AF)PAN/STR/07 – 2024, Sheet No 1(R)/1 dt. 22 Oct 2024 for shed of DG Set is enclosed herewith for reference.

SCH 'A' Part-I ( Site Development, Earthwork and Demolition)

M&L for Surface dressing Soft/loose soil n exc 15 cm deep any type of soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for foundation and getting out in soft/loose soil all as directed and specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25 cm soft/ loose soil all as directed and specified.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.50 mtr above the starting point all as directed.

M&L for hard core (broken stone) of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled / rammed to a true surface complete all as specified and directed.

Excavating in post holes in hard/dense soil n.exc. 0.5 cum and getting out and removing surplus soil to a distance n.exc. 50 mtr and making good the surface complete all as specified and directed.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed by Engr-in-Charge. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I)

Supply and lay fly ash bricks locally available of size 230 X 115 X 75 mm for Signal cable and laid in trenches over underground cables complete all as specified and directed.

SCH 'A' Part-II ( B/R Works)

M&L for 75 mm thick, PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in path , subbase of flooring complete all as specified and directed.

M&L for PCC (1:2:4) type B-2(using 20mm graded aggregate) 100 mm thick as in flooring complete all as specified and directed.

M&L PCC 1:4:8 type D2 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M&L PCC 1:3:6 type C2 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and directed.

M&L Providing,Type B-1 1:2:4 20mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L Reinforced cement concrete M-25 design mix as in foundations, including afts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as directed and specified.

M&L Formwork flat for rough finished concrete surfaces, sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter all as directed and specified.

M&L for 75 mm thick, PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in path , plinth protection and paving laid in panels finished even and smooth without using extra cement complete all as specified and directed. Note:- The groove demarcating panels shall be filled with hot blown bitumen

M& L for Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement of any dia in main reinforcement, stirrups, spacers and binders etc. for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 Complete all as specified & directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment.

S&F FE-410W (Gde-E-250) Quality-B Joist , channel, angle, or tee sections fixed independedntly, witout connecting plates etc complete all as specified and directed Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment.

M&LPlates Fe-410-W(Gde-E-250) quality-B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping/ self driving screw in any position complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws complete all as specified and directed.

M&L steel work as in hand rails, wind ties for roof including securing bolts, posts and struts in fencing including cutting top to shape as directed drilling holes, notching for wire etc flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

M&L Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, confirming to Fe-410 W Gde E-250 B quality ,complete all as specified and directed

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, build in CM (1:6) complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and as directed by Engr-in-Charge.

M&L for preparation on newly plastered surfaces of wall and applying two coats of Premium acrylic emulsion paint over and including a coat of priming paint complete all as specified and as directed by Engr-in-Charge.

M&L for chequred cement concrete tiles 25 cm x 25 cm x 22 mm/30 cm x 30 cm x 22 mm thick with mixture of white & grey cement and no pigments machine pressed set jointed and pointed in neat cement slurry in floors, and cut and polished, over and including Screed bed or bedding layer of mortar in cement morter 1:6 of 15 mm thick complete all as specified and directed.

M&L Refixing Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including dismantling from the posotion and stacking in nearby distance n.exe 100 m complete all as specified and directed.

SCH 'A' Part-III (E/M Works)

M&L for point wiring for following with single core PVC insulated and unsheathed multi stranded FRLSH copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including non metalic rigid concealed PVC conduits (medium grade) (ISI marked) of size 25/20 mm dia (as applicable) including all accessories alongwith one single core PVC insulated unsheathed 1,5 Sqmm (nominal area) multi stranded FRLSH copper conductor cable as earth continuity wire and connected to earth dolly and including PVC sunk boxes ISI marked for mounting of switch, socket, fan regulator etc with 3mm thick plastic laminated sheet as top cover making good the disturbed surface to match with existing surface/wall complete all as specified and as directed. Note:- Three runs of copper conductor cable & one run of PVC condiut including all accessiries measured a one unit. Colour coading shall be strickly followed.

One Light/Fan/Exhaust Fan Point Contrlled by one way 5/6 amps

One socket outlet 5/6 Amp point on the same board

All as per item No.3.01 above but wiring with 2.5 sqmm single core copper conductor for one socket outlet 15/16 amps point on the independent board complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole one way (ISI Marked) complete all as specified and as directed

S&F switch piano flush type 15/16 Amp single pole one way (ISI Marked) complete all as specified and as directed

S&Fsocket outlet 2 in 1, 3 pin, 6 Amp flush type (ISI Marked) complete all as specified and as directed

S&Fsocket outlet 2 in 1, 5 pin,5/15 Amp , multipurpose 230 volts flash type (ISI Marked) complete all as specified and as directed

S&F ceiling rose 2 to 3 terminals . Surface backelite fixed to wall/ceiling complete all as specified and as directed.

S&F MCB SPN ,6 to 32 Amps, 240v, 'C' Curve complete all as specified and directed.

S&F MCB SP ,5 to 32 Amps, 240v, 'C' Curve complete all as specified and directed.

Supply and fixing LED lights fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engineer-in-Charge

S & F single pole and neutral DB wall mounting type, 240 volts, 2 way without bus bar, single door (Metal), suitable for fixing MCBs including connection etc. complete all as directed

S & F single pole and neutral DB wall mounting type, 240 volts,4 way with 200amps rated bus bar, double door (Metal), suitable for fixing MCBs including connection etc. complete all as directed

Supply and fixing / Laying in, connecting, test and commissioning of 10 Sqmm x 2 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel wire, armoured , electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge.

S & F LED bldg security light fittings 35 Watt ,230V AC outdoor type with high pressure die cast aluminium housing, heat resistant,toughned glass cover with IP66 protectioncomplete all as spedified and as directed

M&L for blag security light bracket made out of Gl pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer

M & L sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated, unsheathed cable,1100 volts grade, multi stranded with copper conductor FRLSH cable drawn through and including concealed PVC conduit of 25mm or above (medium grade) as required at site including all necessary accessories fixed on surface of wall/floors /concealed etc. with one run of PVC insulated 4.0 sq mm single core FRLSH copper conductor 1100 Volts for earth continuity conductor all as specified and directed Note :- Two runs of 4.0 sq mm cable, and one run of 4.0sq mm copper cable & one run of PVC conduit shall be measured as one unit length. Colour coading shall be strickly followed.

S&F ceiling fan 1200mm sweep complete with down rod, blades, electronic regulator & all necessary accessories, 230 Volts, minimum air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor complete all as specified and as directed.

Supply and fixing electric water heater storage vertical type with SS inner tank of superior 304 grade and heating element of 2KW, 35 ltrs capacity, BEE 5 star rated, rust & shock proof ABS outer body complete with all accessories such as 04 Nos of grouting bolts, safety valve, thermostat, NRV, connection pipe etc. including two flexible steel pipe 600mm long. (inlet & outlet) with both ends screw bolt as specified and as directed. Make : - Havells/ V-Guard/ Bajaj/ USHA.

Supply and fixing electric water heater storage vertical type with SS inner tank of superior 304 grade and heating element of 2KW, 50 ltrs capacity, BEE 5 star rated, rust & shock proof ABS outer body complete with all accessories such as 04 Nos of grouting bolts, safety valve, thermostat, NRV, connection pipe etc. including two flexible steel pipe 600mm long. (inlet & outlet) with both ends screw bolt as specified and as directed. Make : - Havells/ V-Guard/ Bajaj/ USHA.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level, connected 4 mm dia GI wire protected by 25 mm bore medium grade GI pipe as earthing lead by means of bolts, nuts, check nuts, and washers of GI or steel and other end connected to main switch board/panel/test point etc. as directed including funnel with watering pipe 20 mm bore medium grade GI, wire mesh charcoal or coke common salt laid in altrnative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab of 54 x 54cm, reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I complete all as specified and as directed.

M/S KUMAR AVINASH (BID ID -3164200)

M/S SEHGAL CONSTRUCTION (BID ID -3176894)

BUILDWELL CONSTRUCTION (BID ID -3177316)