SPL REPAIR TO BLDG NO 159 AT ASHOK MARG UNDER GE (MCTE) MHOW

Amount

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire & including 595 x 595 x 6mm thick E-Board Designer ceiling fixed in 600mm x 600mm x 6mm grid (Frame work) etc all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

Taking down Shutters of any description exc 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sqm each of any description complete all as specified and directed.

Taking down, easing, adjusting and refixing in the same opening shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing builders hardware as required including renewal of unserviceable screws etc. complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for brick work in modular size with sub-class "B" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar(1:6) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixtures complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 450 x 300 x 7 / 600 x 450 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

M&L for machine cut mirror polished kota stone slab flooring with rounded edge 18-20mm thick over cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed (Note : steps landing single piece kota stone and edge rounding complete)

M&L for machine cut kota stone skirting 18-20mm thick in riser of steps skirting, dado and pillar over 10mm thick backing coat in cement mortar in (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing complete all as specified and directed.

Mirror polish on marble/ granite/ kota stone/ stone work where ever required to give hight gloss finish complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. Note :- Rate include for chajja, parapet, curved surface complete.

M&L for rendering 10mm thick in cement mortar (1:3) as in ceiling on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surface and applying two coat of distemper oil emulsion over a coat of primer and one coat of putty white or tinted on wall surface complete all as specified and as directed. (Note :- painting will be done by brush/ spray/ roller of building upto the height 10m) all as per directed by Engr -in-Charge)

M&L for preparation of newly plastered surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty specified and directed. (Note :- painting will be done by brush/ spray/ roller of building upto the height 10m) all as per directed by Engr -in-Charge)

M&L for preparation of newly plastered surface and applying two coat of distemper over a coat of primer on ceiling etc complete all as specified and as directed. (Note : painting will be done by brush/ spray/ roller) all as per directed by Engr-in-Charge)

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered/ decorated wall and ceiling surface and applying two coat of Premium Acrylic smooth interior paint and including priming coat of interior primer and incl one coat of wall putty complete all a specified and as directed. (Note : painting will be done by brush/ spray/ roller of building upto the height G+1) all as per directed by Engr-in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site).

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered/ decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed. (Note : painting will be done by brush/ spray/ roller of building upto the height G+1) all as per directed by Engr-in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site)

M&L for Preparation of old painted wooden surfaces of any description over 10cm or girth and applying one coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

S & F of Powder coated Aluminium three track sliding shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:- (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter - 01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber - 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window. (Note :- Thickness of powder coating not less then 50 micron)

S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified. (Note :- Thickness of powder coating not less then 50 micron)

S&F Powder coated aluminium frame for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified. (Note :- Except for item No. 27, 28)

S&F powder coatind of any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples with wooden beading on wooden shutter or width screws to aluminium window/ ventilators shutter.

S&F 300mm length, powder coated aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 300mm ordinary rat and tail rod pattern springes including roller plate and roller complete of mild steel all as specified and directed.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples with wooden beading on wooden shutter or width screws to steel shutter.

S&F in repair Stainless steel curtain rod/ rail 25mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

S & F small fitting such as brackets of any latch and hinges block shaped door and window stops and he like incl all necessay labour article not exc 200mm each in 2nd class hard wood all as specified.

S & F Framed work as in doors, gates and window guard bars of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S&F in repair laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S&F in repair laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortat in 1:4 cutting depth not exc 10 cm as directed.

S&F in repair fancy type CP two way stop cock of 15mm bore complete all as specified and directed.

S&F in repair health faucet CP with connecting pipe 1 meter long with stand.

S&F Chromium plated towel ring fixed with screws (Minimum weight 90gms) complete all as specified and as directed

S&F in repair 15mm dia bib tap long body heavy cast copper alloy (fency type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed Make Cera or equivalent.

S&F 15mm bore brass CP Wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe complete all as spcecified and directed. Make : Cera Cat Part No F2002403 or equivalent approved.

S&F in repairs Overhead shower 125 x 125mm (5" x 5") with 200mm (8") long shower arm and wall flange complete all as specified and as directed. Make : Cera Cat Part No F7020111AB or equivalent approved.

S&F in repairs soap dish glass, complete all as specified and directed. Make : Cera Cat Part No F5003116 or equivalent approved.

S&F in repair Brass chromium plated tublar towel rail, 20mm dia "D' type 60 cm long between flanges, fixed in repair.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed.

S & F in repair vitreous china water closet Rimless One piece EWC with slim soft close seat cover 660 x 350 x 745mm Concealed S or P Trap for better aesthetics Snow White - Whiter than the whitest complete all as specified & directed by Engr-in-charge. Make : Cera Cat Part No S1013230 or equivalent approved.

S&F in repair toilet paper holder chromium plated complete all as specified and as directed. Make : Cera Cat Part No F5003109 or equivalent approved.

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S&F in repairs table top basin, of size 515 x 415 x 145mm fixed complete incl CP waste coupling, waste pipe, PVC connection for hot & cold all as specified and directed. Make : Cera Cat Part No S2020171 or equivalent approved.

S&F in repair chromium plated Central hole basin mixer with 450mm braided connection pipe (without pop-up) screwed down for 15mm GI bore pipe complete all as specifed and directed. Make : Cera Cat Part No F2002461 or equivalent approved.

S&F looking mirror 6.3mm thick exc 0.50 each pane Grinding, polishing and rounding off edges of glass, drilling holes in glass any type fixed on wall with chromium plated screws complete all as specified and as directed.

S&F in repair stop valves/ angle cock, 15mm dia pipe cast copper alloy, fancy type chromium plated with ong shank and cup screwed down high pressure for iron pipe or for union and fixed.

Taking down CI or pvc soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes. Bends, swan-necks etc., including cleaning or refixing or removal to store. up to 10m height.

S &F 110mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls.

S&F 110mm bore PVC (SWR) bends of any radius.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal

S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal

S &F 75mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls.

S&F 75mm bore PVC (SWR) bends any radius

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal

S&F 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal

M&L for PVC (SWR) floor trap 75mm dia plain with graing including jointing with solvent cement etc complete fixed in repair.

S&F 500ltr capacity rotational moulded polythylene water storages tanks (cylindrical vartical with closed top) hoisted and fixed in position including removing the existing water tank all as specified in SSR Part-I (complete all as specified and as directed).

Disconnecting existing tanks, setting aside (or lowering if reqired) for repairs cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n exc 1000 ltr capacity.

S&F in repairs 20mm dia ball valve of PTMT high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm -142gms/ 20mm - 210gms/ 25mm - 455gms/ 40mm - 690gms)

S&F in repair 20mm dia gun-metal globe or gate valve with iron wheel head screwed both ends and iron pipe and fixed.

S & f PVC tank cover for 500/ 1000 ltrs water tank.

M & L for Demolition of ends for damaged portion of chajja/ facia portion scraping or removing Old loose dirt of cement concrete and removing of Old rusted reinforcement, lathing/ welding of new reinorcement for damaged portion, fixing of 0.71mm dia wire netting of galvanised steel wire of size 12mm mesh fixed with tinned tack of wire stable for damaged portion and applying in CM (1:3) with level plaster for width of facia/ Chajja exc 10mm and n.exc 60mm finished even and smooth without using extra cement and including necessary use and waste of form work and concerting with PCC (1:2:4) type B-0 using 25mm graded stone agg mixed with Dr fixit concrete bonding solution as per manufacturer Instruction for required places, height of the bldg up to third floor from the above ground level for work all as specified and directed.

Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100m complete all as specified and directed.

Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres as directed by Engineer-in-Charge.

M&L for PCC 25mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chhaja and roof kerbs/ benching complete all as specified and directed.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gaurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. Note :- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer approved by the GE.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like over including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F, solid PVC wall panelling consisting of 5mm thick plain colour PVC sheet fillet of widht 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

E/M WORK

Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc, and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down carefully copper/aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down carefully MCB DBs/sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

Taking down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/connector complete all as specified and directed by Engr-in-Charge.

Taking down existing ceiling fans any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/connector complete all as specified and directed by Engr-in-Charge.

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including metal flush box, modular cover plate saitable size and cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. including taking down of old aluminum/ copper wiring complete all as specified and directed for the following:-

(a) One light/ fan point controlled by one switch

(b) One light/ fan/ bell point controlled by one/ two way switch

(c) One 5 Amps socket out let point controlled by one switch on SAME BOARD with other switches.

All as per item No.85 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase/ neutral & for earth 2.5 Sqmm green PVC insulated cable for 15 Amps socket point on independent board Controlled by one switch.

Supply and fix in repairs Modular Switch flush type 6 Amps single pole, one way complete all as specified.

Supply and fix in repairs Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified.

Supply and fix in repairs Modular Bell push flush type, 6 Amps complete all as specified.

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified.

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified.

Supply & fix in repairs modular fan regulator step type, 2 module type complete.

Supply and fix in repairs Bell, ding dong type, AC 230 Volts, single pole complete.

S&F in repairs ceiling rose surface bakelite three terminal complete all as directed.

S&F in repairs lamp holder insulated body with back plate for batten fittings complete all as directed.

Supply and fix LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient high transmissitivity diffuser, high lumen ouput 230 volts and intregrated electronic driver connector block etc. complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Havells Cat Part No LHEXBLP7PN1W022 or its equivalent in Philips, Wipro as approved.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Havells Cat Part No LHEXACP7IN1W010 or its equivalent model in Wipro, Philips as approved.

Supply & fix Surface/Recessed mounted LED panel 15 Watts, slim, compact round LED panel of 15 W plastic body with premium diffuser to ensure glare free & even distribution of light complete.

S & F for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base and including fixing of LED bulb 10 watts complete all as specified and as directed. Make : Havells Cat Part No LHFOAJE1TZ1I060 or its equivalent in Philips, Bajaj as approved.

S & F for LED luminaire 600mm x 600mm square LED panel 35/36 watts, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer-in-charge. Make : Bajaj Cat Part No 35/36 BZRSQL 36W GZ1 NW Neutal White its equivalent in Philips, Wipro Havells, CG.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed FRLS cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 6.0 sqmm FRLS cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed.

Supply and fix in repairs double door SPN DBs eight ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete.

Supply and fix MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge.

Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed by Engr-in-Charge.

M&L for single pole and neutral encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make : Bajaj Cat Part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro as approved.

S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 125 to160 Amps Adjustable type with breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.

Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed.

S&F modular TV socket as following :- (a) TV socket 1 module Make :Havells Cat Part no AKOKTOW061 Nos INCLUDING (b) and (c ) (b) Modular with plate for TV socket 1 No (c ) Plastic flush boxes for 1 module jack

Taking down carefully serviceble KWH Electric Meter single phase any type and re fixing the same after completion of the work with wooden rectangular board making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge.

S & F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc.

BHATIA ASSOCIATES

M/s Shree Ganesh Traders

PRABHAT SINGH PARMAR

Jamna Constructions

Jyoti enterprises

GIRIRAJ CONSTRUCTION AND TRADERS

SATHI ENTERPRISES

M/S UnitedConstruction

sunway associates