COMPLETION OF INCOMPLETE AND DEFECTIVE WORKS OF CONSTRUCTION OF PARKING SHED BY OVERHAUL ASSEMBLY WITH HARDSTANDING AT HVF AVADI

Amount

Lump sum price worked out by the Contractor for “Completion of incomplete and defective works of Construction of Parking Shed with RCC foundation, steel super structure and angle iron roof truss with Galvalume sheet roofing including all fittings & fixtures complete all as specified and left out works as shown on Appx 'A' to BOQ as listed in Schedule ‘A’ Part-I

Lump sum price worked out by the Contractor for “EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’ Part-II inserted by the MES

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part-III inserted by the MES

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part-IV inserted by the MES

Lump sum price worked out by the Contractor for “LIGHTENING PROTECTION” as listed in Schedule ‘A’ Part-V inserted by the MES

SCHEDULE ‘A’ PART – VI: MISCELLANEOUS ITEMS :- Note : Unless otherwise specified excavation & Earthwork shall be measured and paid under Sch 'A' Part- II INTERNAL-ELECTRIFICATION:- M&L Sub main wiring with four single core 6 Sqmm, 1100 Volts grade, PVC insulated unsheathed , cable, copper conductor, multistranded drawn through and including metallic rigid steel conduit, stove enamelled black, medium grade of 32mm dia, ISI marked and conduit accessories fixed to steel structure / truss after errection using mild steel flats bent to shape with bolts, nuts and washers etc, including provison of one run of PVC insulated 6 Sqmm multistranded copper conductor as earth continuity conductor and connecting from power DB to 32 Amps TPN socket complete all as specified and directed. Note :- 1. Four runs of PVC cable, One run of steel conduit and One run of PVC earth wire shall be measured as One Unit length. 2. Mild steel flats with bolts nuts and washers will be measured and paid seperately under Schedule 'A' Part - III here in before.

M&L, steel metal enclosure distribution board, DB TPN 4 way, 415 Volts with and including 63 Amps MCB TP-01 No and 6 to 32 Amps MCB SP -10 Nos, powder coated double door system, fitted with two covers suitable for use on 240/415V, 50HZ supply, IP 42 protection, with 200 Amps rated bus bar when MCBs used , complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size 600X600X6mm thick burried directly in ground(earth pit not less than 2.25 M deep below the normal ground level) with top edge of plate not less than 1.5 mtrs below normal GL connected to GI wire 4mm dia as earth lead by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown on electrical plate No -3 of SSR part-I connected to the main board/distribtion board all as specified including testing on completion including the following:- .

Note 1:- The unit rate shall also included for earth work in any type of soil, PCC (1:3:6) type C-1 chamber , RC 1:2:4 type B-1 ( using 20mm graded stone aggregate) cover 50 mm thick, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1 (a) to (e) of preamble ( notes ) under sub-heading earthing ,specified on SI. Page No. 389 of SSR Part-II. Note 2 :- Earthing lead and GI protection pipe 15mm dia light grade beyond 7.5m will be measured and paid separately.

EXTERNAL ELECTRIC SUPPLY:- Supply, Installing, testing and commissioning, factory made and tested LT panel board out door type, plat form mounted, suitable for 415 Volts, 3 Phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with insulated copper busbar 400Apms rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof , IP-54 class protection and made of 3.0mm CRCA mild steel sheet with 50X50x6mm angle iron frame, hinged doors, front opening and locking arrangement (including provision of 65mm Godrej (freedom) lock with 2 keys) and duly painted with two coated synthetic enamel paint over one coat of red oxide primer on the out side and inside including, cable gland and lugs for incoming and outgoing cable etc., independent chambers to accommodate complete all as specified and directed including the following accessories:-

M&L Earthing complete with galvanised steel earth plate electrode of size 600X600X6mm thick burried directly in ground(earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5 mtrs below normal GL connected to galvanised earth stripe 32 x 6mm as earth lead connected by means of bolts, nuts,check nuts and washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No -3 of SSR part-I connected to the main board/distribtion board including testing on completion complete all as specified and directed including the following:-

Note 1:- The unit rate shall also included for earth work in any type of soil, PCC (1:3:6) type C-1 chamber , RC 1:2:4 type B-1 using 20mm graded stone aggregate cover 50 mm thick, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to items No. 1 (a) to (e) of preamble ( notes ) under sub-heading earthing ,specified on SI. Page No. 389 of SSR Part-II. Note 2 :- Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

S & F, wall mounting / panel mounting type combination fuse switch unit 400 Amps, 415 Volts with sheet steel enclosure with HRC fuses complete all as specified and directed.

METAL CLAD PLUG AND SOCKET:- S&F, metal clad plug and socket board/enclosure of size 135x289x62mm, 3pin 32Amps TPN capacity controlled by and including one MCB 32Amps TPN complete all as specified and directed. Make : GE CAT No SLPST 0232Y or equivalent make in Crompton Greaves or Standard as approved by GE.

S & F of energy saving enviornmental mediumbay LED light fitting of 150 watt, IP65 with high efficiency complete all as per cat no. SAUCERPLUSHBP150WLED 85760DTOLTG of Make : Havells or equivalent model of Make : CG/Bajaj. Note: Mild steel clamps required will be measured and paid sepearately under respective items.. Note: Mild steel clamps required will be measured and paid sepearately under Schedule 'A' Part - III here in before.

S&F Industrial type surface mounting socket, triple pole neutral and earth 125 Amps, 50Hz, 415 volts controlled by and including one MCB TPN 125 Amps, 10KA, IP 66/67 - IK 09 including sheet metal enclosure complete all as specified and directed. Make : LEGRAND P17 TEMPRA CAT No 591 07 (415V, 125A, 3P+N+E) or equivalent make in MENNEKES as approved by GE.

S&F straight plug 415 Volts, 125 Amps Triple pole neutral and earth, IP 66/67, IK-09 complete all as specified and directed. Make : LEGRAND CAT No 591 27 (415V, 125A, 3P+N+E) or equivalent make in MENNEKES as approved by GE.

S&F, Junction box of size 200x150x100mm internal dimensions (SMC) type with hinged cover and locking arrangement comprising of 2 Nos aluminium bus bar, porcelain base grip, porcelain fuse connector 4 way with earthing terminal and one MCB SP 10Amps, 10KA and fixed to tubular poles with set of mild steel clamp of size 25 x 3mm bolt, nuts and washers for street light connection including two coats of painting to steel surfaces over a coat of primer complete all as specified and directed.

S & F 150 watt LED energy saving environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, Operating temperature -10° C to +45° C, Operating voltage range 140 V - 270 V, Surge Protection Upto 10 kV, average life L70B50: 50000 hours complete all as per cat no JETAIRISFLS150WLED757PSYMLTG of Make : Havells or equivalent model of Make : Bajaj/CG.

Supply, Installing, testing and commissioning, factory made and tested LT panel board out door type, plat form mounted, suitable for 415 Volts, 3 Phase 4 wire 50 Hz AC supply system all as specified and directed, with necessary bus bar arrangement with 4 Nos of aluminium busbar of 100Apms rating installed on porcelain insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tappings, copper control wiring of required size, the panel shall be dust and vermin proof , IP-54 class protection and made of 3.0mm CRCA mild steel sheet with 50X50x6mm angle iron frame, hinged doors, front opening and locking arrangement (including provision of 65mm Godrej (freedom) lock with 2 keys) and duly painted with two coated synthetic enamel paint over one coat of red oxide primer on the out side and inside including, cable gland and lugs for incoming and outgoing cable etc., independent chambers to accommodate complete all as specified and directed including the following accessories:-

(a) Switch Fuse Unit TPN 63 Amps with HRC Fuses panel mounted type , 415V - 01 Nos (Incoming) (b) MCB TPN 32 Amps, 10 KA, 415 Volts - 01 Nos (Out going) (c) Timer switch with 3 phase contactor of 30 Amps capacity - 01 Nos (d) Switch socket outlet multipurpose, 3 Pin 5/15 Amps controlled by one switch 15 Amps, flush type - 01 Nos (e) Provision of PCC platform 100mm thick with PCC 1:4:8 type D2 using 40mm graded stone aggregate one metre around the panel board.

M&L Sub main wiring with two single core 4Sqmm, 1100 Volts grade, PVC insulated unsheathed , cable, copper conductor, multistranded drawn through and including metallic rigid steel conduit, stove enamelled black, medium grade of 20mm dia, ISI marked and conduit accessories fixed to steel structure / truss after errection using mild steel flats bent to shape with bolts, nuts and washers etc, including provison of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor and connecting at site complete all as specified and directed. Note :- 1. Two runs of PVC cable, One run of steel conduit and One run of PVC earth wire shall be measured as One Unit length. 2. Mild steel flats with bolts nuts and washers will be measured and paid seperately under Schedule 'A' Part - III here in before.

Lump sum price worked out by the Contractor for “HARD STANDING (BALANCE WORK)” as listed in Schedule ‘A’ Part-VII inserted by the MES

Lump sum price worked out by the Contractor for “HARD STANDING (DEFECT RECTIFICATION WORKS)” as listed in Schedule ‘A’ Part-VII-A inserted by the MES

KV RAMANA