REPAIRS TO FLOOR TILING, WALL TILING, STAIRCASE, KOTA STONE FLOORING, KITCHEN PLARFORM WITH GRANITE, RUSTIC TILING IN SMQ, OMQ AT DOMESTIC AREA AT AF STN UNDER GE(AF) CHABUA

Amount

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in flooring 25mm thick as in sub base floor complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile including screed bed of mortar 15 mm thick in CM (1:6) complete all as specified and directed.

All as per item No-3 here-in-before but on dado/skirting over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) Dark Shade polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No-5 here-in-before but on dado/skirting over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.

M&L for coloured rustic tiles 7 to 8mm thick (square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm in floor/path set and jointed in neat cement slurry and pointed in white/coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L cement concrete type B-0 (1:2:4) using 12.5mm graded aggregate as in flooring 40mm thick as in sub base floor complete all as specified and as directed.

M&L for 20-25 mm thick Kota stone slab, in floor etc and jointed with grey cement slurry mixed with pigment to match the slab including rubbing & polishing etc including screed bed of mortar 20mm thick in CM (1:4) complete all as specified and as directed.

M&L for kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick rendering in CM (1:3) complete all as specified and as directed.

Dismantling of AC (corrugated-semi corrugated etc) sheets in roof coverings complete all as specified and as directed.

Dismantling timber scantling of area 40 sqcm and over in section, in any position of unframed works complete all as specified and as directed.

Dismantling timber scantling of 40 sqcm and over in section, in any position of framed works complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in plain sheet as in ridges, gutters, facia bd etc, fixed with self tapping screws or 'J' / 'L' hooks complete all as specified and as directed.

S&F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using Fe 410-W (Gde E-250 Quality- A) complete all as specified and as directed.

S&F rolled mild steel work in tubular trusses, rafters, purlins, posts, flat sections etc incl necessary welding/ fabrications using Fe 410-W (Gde E-250 Quality-A) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (light shade) of size 300x450x7mm/450x300x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM (1:4) complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 (Using 20mm Graded Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for TMT Steel Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for form Work to soffits of suspended slab such as roof slab and similar work n exc 200 mm thick (Horizontal or Slopping) fair finished flat surfaces complete all as specified and directed.

M&L for form Work to edges of concrete flats, treads, break in floor & roofs n.exc 20 cm wide horizontal or slopping and similar works fair finished flat surface complete all as specified and directed.

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed.

M&L for 18 to 20 mm thick granite of any type/colour as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over Cement mortar bedding in CM(1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed.

S&F in repairs stainless steel grade 303, the welded joints of the SS pipes/rectangular size and with existing MS Balusters should be finished smooth by mechanical grinding and rubbing etc as directed. Note:- The rate is deemed to be included for the dismantling of the existing hand rails and making good the disturbed surface matching with the existing adjoining surface complete all as specified and directed.

Resecuring or easing & adjusting, including taking down shutter and refixing in the same opening any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 15 mm bore pipe complete all as specified and directed.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15mm bore complete all as specified and directed.

Cutting chases, pinning to facings where required and pointing for concealed water tubing and making good in CM 1:3 on brick wall cutting n.exc 10 CM in girth complete all as specified and directed.

Supply and fixing in repair of PVC low level flushing cistern 10 Ltr capacity ISI mark syphonic action type push button including flush pipe, ball valve, handle incl bracket complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nut of length 450 mm complete all as specified and directed.

S&F in repair 15 mm dia angular stop cock fancy type, chromium plated with long shank and cup (concealed type) with wall flange, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bib Cock fancy type, chromium plated screwed down for iron pipe 15 mm bore complete all as specified and directed.

S&F 15 mm dia bore fancy type pillar taps, cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type wall mixer with provision for overhead shower with and 115mm long bend pipe for cold & hot water complete all as specified and as directed.

S&F in repair brass chromium plated overhead Shower dia 180 mm Round Shape single flow with and shower arm dia 20 mm & 450mm long round shape with 90 degree for wall mounted shower with flange complete all as specified and as directed.

S&F in repair chromium plated hand shower (health faucet), telephonic type with 8mm dia, 1 meter long CP flexible tube with wall hook and jet, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick or concrete surfaces finished even & smooth, complete all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of primer on newly plastered surfaces of wall over a coat of 3 mm thick wall care putty including preparation of surface, complete all as specified and as directed.

Schedule of Credit

M/s PRABIR ENTERPRISE

M/S S. P. ENTERPRISE

FREEZCON

M/s KL Agarwalla & Co

M/S D P BERLIA

M/S MAHATO ENTERPRISE

M/S DURGA CONSTRUCTION & CO