REPAIR/ MAINTENANCE OF CERTAIN ROAD INCLUDING ROAD FURNITURE IN GRC AREA-I UNDER GE KAMPTEE

Amount

Material and labour for preparing black top surfaces surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with mechanical equipment to remove all loose dirt etc complete all as specified and directed.

Material and labour for applying evenly a priming/tack coat with bituminous primer of paving bitumen at 5 kg per 10 sqm with bitumen grade VG-10 on blacktop surface using mechanical sprayer complete all as specified and directed.

Material & Labour for premixed asphaltic semi dense concrete 30 mm consolidated thickness by using 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient using 8 to 12 tonne power roller complete all as specified and as directed. Note: The work shall be executed by using hot mix plant and mechanical paver.

Material and labour for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix and 1.5 % cement filler, mixed in hot mixed plant and laid by using mechanical paver and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.

Material & Labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5 mm thick single coat as in center line and edge line road marking of 150/100mm width using 'HOT MARK' thermolastic modern propelled road marking machine as directed including all ingredients such as binder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the table No. 800.4 of MORTH specification including spraying of glass beads etc., all as per manufacturer's instruction's and as directed by Engineer-in-Charge.

Supply and fixing in repair solar road delinator 6 LED's of colour red/yellow housed in plastic body, LED's solar cells, battery and light sensor well protected inside, polycarbonate sheet, device protected with powder coated wire mesh, cage system mounted over 47mm dia steel tube powder coated length 600mm having sheet foot for firm grip to ground,delinator to have additional reflective bands, system workable for 2-3 days (nights) after full charge for 8-10 hours complete all as specified and as directed. Make: GREENS cat No GPL-13-01 or technocommercially equivalent in GREENLITE / 3M / DARKEYE Note: Delinators with extra height can also be made of height 750mm, 900mm or 1000mm.

Supply and fix solar road stud having 3 LEDs of colours unbreakable poly carbonate shell & clear facings designated for maintenance free operation 100 % water proof design confirms to IP67, Dimension 125 x 125 x 25 mm with dual shank of 65 mm High efficiency mono- crystalline solar panel 3 V/ 120 mA, One Ni Mh LSD rechargeable battery (1.2 V / 800 mA) high temperature, Six super bright LEDs with 14,000 mcd, view distance upto 1000m, Flash rate 2 Hz or according to customers requirements, bearable weight 20 Tons, Colour: Red, Amber, Blue, Green and white, Working time 30 to 40 hours successively after the battery is fully charged. The electronic circuit is encapsulated with the battery in the body of solar stud, a non-invasive switch (optional) to avoid battery drainage during storage and transportation, Charging time: five to six hours/day, Working temperature: 40ᵒC - 75ᵒC, Lifetime: Three to five years, Easy installation, no maintenance, brightness sensitive auto-switch automatically turns on at night and turns off at dawn, high visibility LES's help ensure easy and safe night driving, ideal for highways, parking lots, roads and similar isolated or stand-alone traffic applications, complete as per MORTH/ IRC specifications and manufacturers instruction, complete all as specified and directed. Make:- DARK EYE / 3M / GREENS / GREENLITE

Supply and fix in repair aluminium road studs of size 110x 120x 24mm with shank reflective, micro prismatic (red/yellow/white) with MS zinc coated nails of size 12mm dia and 120mm long having both as sides (dual direction) high impact ABC 3 Nos containing 7 heads each i.e. 42 heads in retro-reflector etc complete aluminium coated of approved quality complete all as specified and directed. Make:- DARK EYE / 3M / GREENS / GREENLITE

NOTE : SCHEDULE OF CREDIT (Amount on page No 33 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.)

LAL AND SONS (BID ID -3285180)

M/s KAMAL R AGRAWAL (BID ID -3287213)

Raut Construction (BID ID -3283283)

vidhamal&sons (BID ID -3287157)

Bidder Name

Raut Construction

vidhamal&sons

LAL AND SONS

M/s SHREE SAIBABA CONSTRUCTION

M/s KAMAL R AGRAWAL