Construction work for Observation Home for Girls under Mission Vatsalya at Nagaon district.

Civil Work

2.8: Earth work in excavation by mechanical means (Hydraule excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width of 10 sqm on pian), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m2.8.1: All kinds of soil..

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations ete. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.8 1:4:8 (1 Cement: 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe 500D or more.

4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

5.five level, excluding cost of centering, shuttering, finishing and reinforcement : n en odes, it content in a try ticket, ot an art e. one pi 5.2.2 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natu ral sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)

centering and shuttering including strutting propping cir alumns, Pillars, Piers. Abutments, Posts and Struts

Rick work with common burnt clav modular bricks of clase destation 7.5 in foundation and plinth in 02 1 Cement mortar 1-4 (1 cement 4 coarse sand!

6.8 Brick work 7 cm thick with common burnt clay F.P S. (nou modulet brick of class designation 7 5 in cement mortar 13 (1 cement • 3 coarse sand) in superstructure above plnth level and upto floor five level

11.3 Cement concrete fooring 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps ete. complete. 11.3. 1 40 mm thick with 20 mm nominal size stone aggregate

11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 18 mm thick sqm 570.75

13.1 12 mm cement plaster: 13. 1. 1 1:4 (1 cement: 4 fine sand)

13.5 15 mm cement plaster : 13.5 / 1:4 (1 cement: 4 coarse sand)

12.52 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "Y" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "Y" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "I" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including. required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T runners to be suspended from ceiling using GI siotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level chps of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer in charge 12.52.2 Gi Metal Ceiling Lay in perforated Tegular edge giobai white coior tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of Gl sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polvester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece

10.16 Sicel work in built up rubular (round, square or rectangular hollow tubes ete.) trusses ete., including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 10.16.3 Electric resistance or induction butt welded tubes

1250. providing and fixig precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approvet in Enginect in charge) 0.50 mm |• O 05 % total trated the knees with ant costing 120 grams per sqm as por Is 277, in 240 mpa stoel grade, $ 7 microns epow pomer un both side of the sheet and polvester top coat 15 1N rectons Shert should have prote toe guard Nine et 75 hactens normum to avod a ratches durne ransportation and shoukf be supplied in single lengtb upto t& mette moe desired by fingneerin-chaps The sheet shall be fixed usung self drilling /self tapping sere as of 82e (b.5x o miny with LPUM seal, complete upto any pitch in honzontal/ vertical or curved surfaces, exe luding the cost of partins, raters and trusses and including cutting to size and shape wherever required

12.51 Providing and fixing precoated galvanised steel sheet roofing accessores 0 50 mm (-0.05 %) total coated thickness, Zmc coating 120 grams per sqm as per IS: 27%, in 240 mpa sicel gradc. 5:7 microns epoxy primer on both side of the sheet and polvester top coat 15-18 microns using self drillmg/ self tapping screws complete 12.51.1 Ridges plam (500 600mm)

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surtace even and smooth complete.

13.48 Fishing with Deluxe Multi surface paint system for intenors and exteriors using Primer as per manufacturers specifications: 13.48.1 Two or more coats applied on walls (a 1.25 lu / 10 sqm over and including one coat of Special primer applied a 0.75 lur / 10 sqm

18/9.48.2 Providing and fixing M.S. grills of required patter in frames of windowsete, with M.S. flats, square or round bars etc. including priming coat with approved strel primer all complete. 9.48.2 Fixed to openings /wooden frames with rawl plugs screws ete. 11 Ornamental grill (c) Fixed to Brickwork/P.C.C/R.C.C. (ASSUMING 7 KG/SOM....)

13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer s specifications including appropriate priming coat, preparation of surface, ete. complete

10.17 Providing and fixing M.S. fan clamp type l or ll ol 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete each 185.95

12.51 Providing and fixing precoated galvanised steel sheet roofing accessores 0 50 mm (-0.05 %) total coated thickness, Zmc coating 120 grams per sqm as per IS: 27%, in 240 mpa sicel gradc. 5:7 microns epoxy primer on both side of the sheet and polvester top coat 15-18 microns using self drillmg/ self tapping screws complete 12.51.1 Ridges plam (500 600mm)

10.16.51steel work in built up tubular (round, square or rectangular hollow tubes ete.) trusses ete, including cutting hoisting. fixing in position and applying a priming coat of approved steel primer, including welding, and bolted with special shaped washers etc. complete. 10.16.3 Electe resistance or induction

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height sion comprising of uPVC multi-chambered frame with in built roller track and sash extruded profiles duly comtorced with 1 60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required Length (shape & size according to uPVC profile), appropriate dunension of uPVC extruded glazing beads and PVC extruded interlocks. FPDM gasket, wool pile, zine alley (white powder coated) touch locks with hook. zir lov body with single noon rollers weight bearing capacity to be 40 kg. G 1 fasteners 100 x 8 mm size for fixing tame to finished wall and necessary stamless steel screws etc. Profile of frame & sash shall be mitred cut and fision welded at all corners, including drilling of holes for fixing hardware's and dramage of water etc. Aner fixing frame the gap between frame and adjacent finished wall shall be filed with weather proof silicon sealent over backer rod of required size and of approved quabty, all complete as per approved drawing & direction of Engineer in Charge. (Single / double glass panes, wire mesh and silicon scalent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.147D. 1 Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 1 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqmi

9.118: Providing and fixing to existing door frames. door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm ($ 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (* 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filledwith High Density Polyurethane foam. The Top &. Bottom edges of the shutter are covered with an end cap of the size 25 min X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer's specification and direction of Engineer in charge to take up necessary hardware and fixtures

9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of Ist class hard wood and well matched teak 3 ply veneering, with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws ete. complete : 9.96. 1 300x16 mm

9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 9.97.2 250x10 mm

9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.100.2 100 mm

Providing and laying Ceramic glazed foor tiles of size 300x300 mm (thickness to be specified by the Iman iactureri of Ist quality conforming to IS : 15622 of approved make in colours such as White. Ivory. Grey. ume Red Brown, laid on 20 mm thick cement mortar 14 1l Cement 4 Coarse sandi, Joinung with grey cement slurry a 3.3 kg/sqm mcluding pomung the goints with white cement and matching pigment et complete

Providing and fixing ist qualuy ceramic glazed wall ules conforming to IS: 15622 (thickness to be specified by the manutacturer. of approved make, in all colours. shades exre burgundy, bottle green, black of any size as approved by ngineer-in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1.3 (1 cement: 3 coarse sand) and jointing with grey cement slurry a 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

item No 1(2.8) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1 5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excovated soil as directed, within a lead of 50 m 2.8.1 All kinds of soi!

Item No 2 (11.2): Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

Item No 3(4.1.5) : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 4.1.5 1:3:6 (1 Cement: 3 coarse sand (zone III) : 6 graded stone aggregate 20 mm nominal size)

Item No 4 (5.22.5) : Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.5 Hard drawn steel wire fabric

Item No 5(5.1.2) : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth leve! 5.1.2 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Item No 6 (5.9.1) : Foundations, footings, bases of columns, etc. for mass concrete

Item No 6 (5.9.5): Lintels, beams, plinth beams, girders, bressumers and cantilevers

Item No. 6(5.9.16.2): Edges of slabs and breaks in floors and walls 5.9.16.2 Above 20 cm wide

Item No 7 (6.1.1): Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7,5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)

litem No 8(11 5) 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1.24 (i cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1.2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement sturry, but excluding thecost of nosing of steps etc.

Item No 9 (11.6.1 ) : Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 18 mm thick

Item No 10 ( 13.2.1 ) : 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Electrical Item Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group-A

Group-B

Group-C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/rcessed steel conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing following Modular base & cover plate on existing modular metal box as required. 4 Module

6 Module

8 Module

12 Module

roviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections etc. as required.32 A TP&N

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volt, on surface/recess cpmlete with tinned copper bus bar, neutral bus bar, eart bar, din bar, inter connections, powder painted including earthing etc. as required.(but excluding MCB/RCCB/Isolator)6 way , Double door

8 way , Double door

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 A

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. As required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted icluding earthing etc. as required.4 way (4 + 12), Double door

6 way (4 + 18), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.For 4 way, Double door TPN MCBDB

For 6 way, Double door TPN MCBDB

For 8 way, Double door TPN MCBDB

225 mm width X 50 mm depth X 1.6 mm thickness

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc., including supplying and fixing ball and socket arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Superior finish extruded LED Batten white powder coated pressure die cast aluminium body with High transmitivity, non Yellowing PMMA diffuser with driver and accessories pre-wired upto terminal block assembly. LED Luminaires of make PHILIPS Cat No. BN021C LED205 PSU NW GR LED 18W or equivalent inlcuding lamps etc. complete [TL]

Supplying of 9W LED Bulb non-dimmable in the existing batten / angle holder as required and as directed by the department ( Jaquar or eqvt. make).

Sainitary and Water Supply Works. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet : 17.17.2 250x125x25 mm

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 17.18.1 10 litre capacity - White

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 17.25.1 Flat back wash basin of size 630x450 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete17.28.2 Flexible pipe17.28.2.2 40 mm dia

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 17.61.1 100 mm dia

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT urinal cock of approved quality and colour. 17.76.1 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-ALPE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.18.2.3 2025 (25 mm OD) pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.13.1 25 to 40 mm nominal bore

Providing and fixing brass bib cock of approved quality : 18.15.2 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :18.17.3 40 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.5 40 mm nominal dia Pipes

Analysis rate for Iron Removal plant including all necessary equipments as per direction by the concern authority

centering and shuttering including strutting propping cir alumns, Pillars, Piers. Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc and removing of form for foundation, footing, bases of column etc for mass concrete.

centering and shuttering including strutting propping cir alumns, Pillars, Piers. Abutments, Posts and Strut

8. Land Dwvelopment

Please Enable Macros to View BoQ information