Renewal of canal service Road of Baghla Pump Canal from km 10.000 to km 10.560 in District Prayagraj

Earth work in canal Earth work in closing & reparing cuts and pot holes on the shoulders of the service raod in all types of soil including all lead and lift complete with dressing & manual compaction.

WBM Grading - III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per MORD Specification Clause 405.

Prime Coat (Slow Setting)- Providing and applying prime coat with bitumen emulsion of specified grade on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70Kg/sqm as per MORD specification.

Tack Coat- Providing and applying tack coat with bitumen (VG-10) using emulsion distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular base surface cleaned with mechanical broom as per MORD specification.

20mm thick Open-Graded Premix Carpet using Bituminous - Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of speicified size aggregates either using penetration grade bitumen or cut-back or emulsion to serve as wearing course on a previously prepared base, including mixing in a hot mix plant, transpotation to the site, laying with paver finisher to the required grade, level and alignment and rolling with a smooth wheeled roller 80-100 Kn capacity, finished to required level and grades as per MORD specification.

Seal Coat - Providing, and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type C seal coat. As per MORD Specified Clause 510