60/W/EDC II/SRE/2021-22

Amount

Detail of Work

Opening of Connection of 100 KVA T/F properly.

Removal of 100 KVA T/F on the D/P from Site of works to ESC SRE, JE Store including loading & unloading at both ends (Distance 0 to 55 K.M.)

Safety cartage of New 250 KVA T/F from ESC, Meerut, to the site of work at various sites including loading & unloading at both ends (Distance approx. 100 K.M.)

Safe cartage of PCC poles up to 8.5 Mtr. from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends.(Dist.Up to 55 Km.)

Erection of double on PCC poles up to 8.5 Mtr Long with complete fitting with all accessories as per RESPO specification.

Constriction of plinth for installation of 250 kv T/F of size 1x1x1 mtr made of 9”inch thick wall in all four sides with 6”inch thick RCC top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall as per RESPO Specificaiton.

Safely installation of New 250 KV T/F on the plinth with proper alignment and Complete fitting including making connection and commissioning

Earthing of 250 KVA T/F and metricubical (1 No body & 1 No. neutral earthing) by boring of 60 Ft deep & fixing of 60 ft. G.I pipe 11/2" Dia (Jindal Class B) and connecting with G.I. Strip of size 40x5 mm and G.I wire at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe

Fixing of Aluminum Crimping Lug 240 Sq.mm

Safe cartage of 11 KV XLPE Cable size 3x120 sq mm from ESC SRE to site of work at various sites including loading & unloading at both ends.

Providing & fixing of double Pole clamp on PCC/STP poles with nuts bolts made of new MS flat iron 50x6 mm on PCC/STP poles as per RESPO specification.

Laying, lifting, Stringing, proper sagging DOG Conductor of including fixing of all accessories.

Grouting of stay rod after digging of pits in block 16x1800mm in ratio 1:4:8 with Ist class brick ballast good quality dry river sand and nuzzling of stay wire 7/10 SWG and fitting the same on pole.

Digging of Trench 02 feet deep and 1 feet wide for laying of 11 KV XLPE Cable 3x120 Sqmm.

Laying of 11 KV XLPE cable 3x120 Sqmm. sq.mm in to the trench after spreading the sand into the trench and then laying of Ist class bricks in the trench and put the cable on the bricks and then covered the cable with ist class bricks from all three sides of cable and then filling the earth with ramming .

Filling the cable jointing kit Indore & outdoor type size 3x70/3x120/3x185/3x300/ Sqmm. sq.mm as per RESPO specification.

Making of Brakets with M/S Channal and MS angel complete work.

Safely cartage of CT/PT unit from ESC Meerut store to site of work including loading & unloading at both ends

Safely cartage of 11 KV Pilfer proofm meetering quibecable from ESC store to site of work including loading & unloading at both ends

Safe installation of CT/PT unit on the double pole with complete fittings including making connections and commissioning

Groughting of 11 KV Pilfer proofm meetering quibecable with cemmented angel chanal and installation with proper connection.

M/s Adesh Kumar Contractor

M/S ARPIT ENTERPRISES