ADDN ALTN TO JCOs MESS AT 2003 STN PROVN OF FOOTPATH FROM SHOPPING COMPLEX TO ORs MD ACCN AT 2003 STN AND PROVN OF COMPOUND WALL AROUND GUARD REST ROOM AT 2003 STN UNDER AGE BR AF GURGAON AND AGE EM AF GURGAON OF GE AF GURGAON

Amount

B&R WORKS Demolition Plain or corrugated steel/ transparent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified an dirctd.

Dismantling framed trusses span n. exc. 10m complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed

Taking down steel windows n exc. 1.5 sqm each incl cutting holes for taking out hold fast or dismantling bickwork (holes cut and any other damageto jambs, walls for taking out hold fast shall b finished identical to existing finish without any extra cost to Govt.) all as specified and directed.

Demolition of RCC (other than ground floor) beams landing, chajjas, slabs sleves & similar suspended work and removing unserviceable material exc 100 mtr as specified.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level and removing unserviceble material exc 100 mtr as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose/ soft soil etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and directed.

M&L for PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundation and mass concrete etc complete all as specified and as directed

M&L for RCC M25 (Using 20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L for RCC M25 (Using 20mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts etc all as specified and directed.

M&L Reinforced cement concrete (Design Mix M-25, using 20mm graded crushed stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L Reinforced cement concrete (Design Mix M-25, using 20mm graded crushed stone aggregate) as in chajjas complete all as specified and as directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for TMT Mild steel bars 5mm dia and over upto 10mm dia in stirrups, spacer, binder, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Use and waste formwork to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste formwork to sides of rough finished flat surfaces of floor and roof beam , beam and haunching girders, brussemmers, lintels, cantilevers, slabs and similar works complete all as specified and directed.

Use and waste formwork to sides of rough finished flat surfaces of concrete pillars, posts, struts, piers, columns stanchions and similar work; vertical or to batter complete all as specified and directed.

Use and waste formwork to chulla hoods, troughs and similar items including rough finished surfacess of concrete complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6mm mean radius built in CM 1:6 complete all as specified and as directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in flooring, finished surfaces even and smooth without using extra cement etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for Non Skid ceramic coloured jointless tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M & L for Non Skid ceramic coloured jointless tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , as in vertical surface such as skirting dados and risers of steps, cut ans set of joint match to floor tiles in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M&L for joint free Glazed ceramic printed coloured tiles 300mmx 450mm/ 450mmX350mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match,incl cutting edges etc over 10mm thick screed bed in CM 1:4 complete all as specified and and as directed Note:- Design, shade, and pattern of fixing of tiles shall be as directed by Engr in Charge.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair complete all as specified and as directed.

M&L for two coats of exterior weather proof paint on wall surface with roller brush over and including one coat of alkali resistant primer over already prepared surface ofwalls all as specified and directed .

M&L for peparing the surface and applying 2mm thick wall care putty to make the surface smooth and even complete all as specified and dircted.

M&L for preparation of new surfaces of wall and applying two coats distemper oil emulsion, white or tinted on wall surface with roller brush all as specified and as directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

S&F MS work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 605X605mm size Anodised aluminium snap grid frame work for false ceiling all as specified

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F rolled framed galvanised prepainted steel section window/ventilater section of frame 72x55 mm fixed to wall or concrete surface with MS hold fast (30X5mm section) 150 mm long made, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanozed as per IS 277 with zinc of 120 gms/sqm.) glazed shutter and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including powder coated grill / guard bars made of square bars 10mm dia at 150mm c/c Horizontal spacing fixed in MS flat frame (30x5mm) fixed to windows frame with screws,incl 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed type-4000 series ref drg no CEAF/STD-191/2014 SH1/2&2/2 Make :- NCL, Ashish Industries or equivalent

S&F in repair white vitreous china wash basin white flat back size 580x450mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F pressed steel frame (factory made) of size 1.25 mm thick MS steel for cupboard shutter with one rivet of 20mm wide and 12mm deep includings necessary fixing lugs, hinges, locks strike plate etc complete of size 60X40mm including one coat of red oxide primer, PCC 1:3:6 as in back fill of chowkhats all as specified and as directed

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutters/ pelmet fixed complete all as specified and as directed.

S&F as in repairs 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)

S&F stainless steel gratings of outer frame 150mm openable type incl all necessary fittings such as hinges including CM1:4 to fix complete

Taking down steel tubing & connections of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections of 20 mm dia bore complete all as specified and as directed

Cutting chases for concealed water tubing or concealed conduit & making good in CM 1:3 of girth exc 10 cm and n exc 20 cm in brick wall

S&F medium grade galvanized steel tubing with all fittings & fixed (concealled/Surfaced) complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings & fixed (concealled/surfaced) complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

Dismantling of existing tank of capacity exc 250 ltr but not exc 500 ltr,water tanks and removing from the site

S&F rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 500liter capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed

S&F in repair stainless steel decorative curtain rod of 25mm bore and incl 02 Nos stainless steel finale and bracket 02 nos etc complete all as specified and as directed.

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L Second class hard-wood wrought timber scantlings as framed work complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treate→

S&F 35mm 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed

S&F 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F for 375mm Brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed

S&F for 150mm long Brass handles, cast type, polished bright

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

S&F for Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Surface excavation soft and loose soil n exc. 30 cm deep and averaging 15cm deep and getting out.

M&L for 100 mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base etc complete all as specified and as directed

M&L for 60mm thick Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

M&L Sand filling under floors in trenches or in foundations including watering and consolidation

M&L for Providing, cement concrete 1:2:4 type B1 (using 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed (including necessary formwork)

M&L for pre cast kerb stones of cement concrete1:2:4 (20mm graded stone aggregate) factory made, size shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectly levelled surface pointed and jointed in CM 1:4 complete all as specified and directed.

M&L for preparation of new or peviously untreated concrete or plastered surface and applying two coat of synthetic enamel paint over a coat of priming paints plaster coat etc complete all as specified and directed.

M&L Providing precast cement concrete 1:2:4, B-0 using 12.5mm graded crushed stone aggregates louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame (Precast frame shall be measured separately and including set in CM 1:4

M&L for preparing new surfaces of plaster or unplastered surfaces on wall surfaces and applying two coats of cement based paint complete all as specified and directed.

M&L PVC ( SWR ) pipes single socketed 75mm bore in any length with rubber ring joints laid in trenches or in floors as in weep holes

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F of 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts in liew of screws as in roof, wall etc.

E/M WORKS Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH cable 1100 volts grade confirming to IS: 694 drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 3.00 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed FRLSH cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-

One light point controlled by one switch with cables 1.5 Sqmm size all as specified and directed.

One fan point/Exhaust fan controlled by one switch with cables 1.5 Sqmm size all as specified and directed.

One 5 pin socket oulet 5/6 amps on same board including single core straned copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in nsame conduit as earth wire to the common earth and connecting to earth dolly all as specified.

One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sqmm of size all as specified and directed.

All as per item No 89 above but 2.5 sqmm two single core and 1.5 sqmm one single core as earth wire for 5/15 Amps socket

S&F switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed at site.

S&F switch socket outlet combintion2 in 1 , 3 pin , 5 Amps and 15 Amps flush type all as specified and directed at site.

S&F submain wiring with unsheathedmulti-stranded HR Grade copper condductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6.00 Sqmm single core HR Grade and one run of 4.00 Sqmm PVC insulated copper conductor for earth continuity wire between manin DB to Sub Main DB complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wal complete. Note 1 :- Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F submain wiring with unsheathedmulti-stranded FRLSH Grade copper condductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core FRLSH Grade and one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub Main DB complete all as specified and as directed. Note :- Two run of single core 4 Sqmm cable with one run of 2.5 Sqmm earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note 1 :- Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed.

S&F ceiling rose surface bakelite 3 terminal with base plate complete all as specified and as directed.

S&F , testing and commissioning of pre -wired 36 Watt LED CW light fitting of size 600x600 mm complete with CRCA housing , replcacable driver , high quality diffuser etc all as specified and as directed . The rates includes all fixing accessories including wiring and channel support , self interlocking connector blocks for connecting wires , earthing of fixtures with 1.5 sqmm FRLS PVC insulated copper conductor wire etc complete

S&F MCB, DB , TPN 4 way sheet metal enclosure double door with 200 Amps common bus bars and neutral link complete all as specified and directed at site.

S&F MCB,TPN 240 volts , 50 Hz , 100 Amps , 10 KA complete all as specified and directed at site.

S&F MCB, SP 05 to 30 Amps 10 KA complete all as specified and directed at site.

S&F stepped type elecronic fan regulator flush type on existing phenolic laminated sheet complete all as specified and directed at site.

S&F land scaping wall light sun / prismatic made up of unbreakable carbonate suitable on wll / surface mounting lamp holder with 12 W LED with all accssories complete all as specified and directed at site.

S&F rigid non metallic PVC conduit 20mm dia exclusive of boxes ( junction / terminal ) but inclusive of all tee , bends , elbows , reducers , bell mouth tube ends and fixing accessories such as couplers , lock nuts , saddles , pipes hooks etc complete all as specified and directed at site.

S&F LED tube light fitting 1x22 watt T5 , saviour slim energy saving channel suitable for LED lamps with standard fittings complete all as specified and directed at site.

Supplying laying and connecting testing and commissioning of 25 sqmm 3.5 core earthed system under ground LT XLPE insulated screened , PVC bedded , armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts laid in trenches or fixed to walls or drawn through pipe with suitable glands , crimping type lugs etc complete all as specified and directed at site.

M&L for brick protection with sub class 'B' Designation 75 old bricks laid dry flat 23 cm in width over sand cushioning in trenches as perpendicular to the direction of undergound cable complete all as specified and as directed

Supply and fix in replacement of switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed at site.

S&F socket outlet piano type 2 in 1, 3 pin, 5 & 15 Amp flush type univeral complete all as specified and directed.

S&F in reapar GI pipe light grade 40mm bore in trenches/wall/poles for protection of cable complete all as specified and as directed.

akhil enterprises

Shakashi Construction Co.

M/S Sharan Kumar

M/S ujjwal associates