Construction of Temporary Cow Shed near Gaushala in Village Raipur Kalan Chandigarh.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR 10.2)

Providing and fixing 1"x1" IRC fabric M.S wire of 10 gauge to existing frame complete in all respect and to the entire satisfaction of the Engineer-in-charge. (N.S.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on New work. (DSR 13.61.1)

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch,including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified (DSR 12.47.1)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter 600 mm over all girth) ( DSR No.12.51.6)

Providing and fixing of 2.5" dia (65mm nominal dia and 76.6 mm outside dia) G.I pipe railing (7.216 Kg/mtr, C- Class) having horizontal and vertical members of railing are to be welded by existing 2'' G.I Pipe. The vertical member supports shall be connected to the anchorage member of size 0'-9" (50x50x5mm angle). The rates also include the cost of welding and embedment with cement concrete 1:2:4 of size 1'-3"x1'-3"x1'-0" complete in all respect to the entire satisfaction of Engineer - in - Charge. (N.S.)

Prepration of sub grade including trenching, rough dressing of soil, final dressing of earth to give level and camber, watering, rolling with a road roller and compaction of bed complete in all respects to the entire satisfaction of Engineer - In - Charge.(N.S.)

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (DSR 2.8.1)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (DSR 2.27)