WBPWD/EE/JED/eNIQ36/2024-25

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N”copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 8 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works

(On board)

Supplying and fixing 415V, 100A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating [Make - L&T]

Supplying & Delivery of following sizes cable`

4 core 50 sqmm al/a xlpe (Make - Polycab/ Havells/Gloster)

Laying of cable above 3½ core 35 sqmm and upto 3½ core 50 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

4 core 50 sqmm )

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

4 core 50 sqmm )

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 50 sqmm )

S & F 415 V 16 to 32 A per way 4 way VTPN MCB DB Up to 160A for lexic MCB having IP 43-IK09 with metal door four pole MCCB as incomer& TP MCBas outgoingin suitable enclosurewith metal door flushed in wall as per GS comprising of the following: a. 415 V 125 Amp 25 ka c curve FP MCCB -1 no b. 415 V 63 A TPMCB ----- 3 no c.415 V 32 A TPMCB ----- 1 no d. cable end box -2 no (Make: Legrand)

Supply & fixing 415 v 16 to 32 A per way , TPN MCBDB with ss enclosure double door with IP 42/43 protection with 63A 4 pole isolator as incomer and SPMCB (c curve 10 ka) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment . Incomer :- 63A FP MCB isolator Outgoing:- 12 no 6-32A SPMCB (C-Curve 10 KA) (Make- Legrand)

Supplying and fixing (2+12) way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incomer:- 40 A DP MCB Isolator- 01 Nos. Outgoing :- 6-32A SPMCB (C-Curve 10 KA)- 12 Nos [Make:- Legrand]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & fixing 250 v 2no 3 pin 6 A flush type plug socket with 2no 6 A modular switch (Anchor make)switch on 6 module GI box with 6 module top cover & earthing attachment.

Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 nos. 16 A, 3 pin Modular type plug socket with 1 nos. 16A Modular type switch (Brand approved by EIC), on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy.Connections.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

4x25 sqmm) + 2x16 sqmm) in 25 mm Rigid conduit 2 nos as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages

No. 4 SWG

Supply & delivery of Different Fan & Fittings as mentioned under:-

Supply & delivery Mas LED Tube 1200mm 18W 865 T8 I – 2100lm T8 [Make - Phillips/Bajaj/Crompton)

Supply & delivery of 20 Watt LED T8 tube with extruded Al body,PC diffuser and inbuilt driver with efficacy of 100 lumen/wt [Make – crompton LTT8-20/ Phillips/Bajaj)

Supply and fixing of 18 Watt LED 100lm/watt recessed mounted light fittings(Make Crompton LSDEP-18-CDL/Philips/Bajaj)

Supply and fixing of 20 Watt LED Wall mounted light fittings incl. all acces. And Lamp.(Make Philips 58185 blush wall light-single /Bajaj/Crompton )

Supplying Mirror Light fitting [Make:- Philips, Cat No. BN 021 LED12S 6500 PSU GR/Crompton/Bajaj]

Supply and fixing of 18 Watt LED SURFACE mounted linear light fittings(Make Crompton CCP-121-18-WW/TL/CDL-SL-NWH /Philips/Bajaj)

Supply & Delivery of 48"(1200 mm), 53W; 370 RPM; 215 CMM; 1 star ac ceiling fan with blades, canopy, fork, rubber bush etc. [Make-CG, model- high speed, orient- Summer Breeze Pro]

Supply & Delivery 18"(450mm),90W, 1325 RPM, 110 CMM wall fan with metal blades. [Make- Orient, Model- Tornado Wall II,Crompton, model- WM SSTORM 2].

Supply & Delivery 9"(230mm), 1370 RPM, 40 Watt Heavy duty AC Exhaust fan incl. necy., all connection. [Make- EPC]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for Al

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply and fixing of 9 Watt LED 825 lm Bulb(Make Philips/Bajaj/Crompton)

Supply and delivery of 1.9 Tr or higher capcity Split A.C. machine fitted with Scroll/Rotary Compressor, Rated cooling capacity-7040 W, Rated power input-1935 watts, ISEER-5, Current drawn (Rated)-8.5 Amps, Fan speed control-5, Air flow-1160 CMH, Sound level (IDU)-30dB, wireless type remote control and both coil of IDU & ODU should be made of copper. [ Make- O-General ASGG24CGTB-B (R32) or equivalent of Mitshubishi Heavy Industries / Mitsubishi Electric-MS/MU- AGZ24VF-KT/Voltas]

Installation, Testing & Commisioning of 1.9 Tr TR Split AC both indoor/outdoor unit incl. fixing of supporting kits and mending good the damages.

Supply & Laying of 1. Electric PVC Unarmoured flexible copper cable (4 core 2.5 Sqmm) (Make : Finolex/Havells/Polycab) 2. Copper pipe 5/8" & 1/4" for suction as required and wrapping the copper refrigerant pipe line with 26 SWG aluminium sheet.(Make : Rajco/Royku) 3.Insulation Foam 5/8" & 1/4" thickness 0.9 mm with 9 mm thick nitrile insulation. 4. Supply and laying 20 mm UPVC pipe (Make : Finolex/Supreme/Ashirvad) for water drainage along with all fittings, fixtures & scaffolding.

S&F MS platform for maintenance of the outdoor units of AC machine frabricated from MS angle/flat etc including painting and as directed by EIC for above machines

Dismentaling of old electrical accessories with mending good the damages,

M/S JOGMAYA ENTERPRISE (BID ID -5948991)

BAPPA CONSTRUCTION (BID ID -5953745)