Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹20.3 LAdmitted-Finance | -42.00% | ₹20.3 L | L1 | Admitted-Finance |
| 2 | L2₹21.4 LAdmitted-Finance | -38.81% | ₹21.4 L | L2 | Admitted-Finance |
| 3 | L3₹21.7 LAdmitted-Finance | -37.86% | ₹21.7 L | L3 | Admitted-Finance |
| 4 | L4₹22.2 LAdmitted-Finance | -36.42% | ₹22.2 L | L4 | Admitted-Finance |
| 5 | L5₹22.3 LAdmitted-Finance | -36.11% | ₹22.3 L | L5 | Admitted-Finance |
Tender Value
₹35.0 L
EMD Value
₹69,900
Closing Date
13 Feb 2026, 6:00 pmClosed
Executive Engineer PWD(RandB) Div Khour
Executive Engineer PWD(RandB) Div Khour
Construction of ACR at Govt. High School at Kot Maira Under Samagra Shiksha-2025-26 (Ist Call)
2026_PWDJK_301328_1
Short e-NIT No. 35 of 2025-2026/Khour Dated 24-01-2026
Open Tender
Civil Works
120 days
KHOUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Yes
Executive Engineer PWD(RandB) Div Khour
₹69,900
Yes
Executive Engineer PWD(RandB) Div Khour
21 Feb 2026
24 Jan 2026
14 Feb 2026
24 Jan 2026
13 Feb 2026
24 Jan 2026
30 Jan 2026
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
P/Laying of cement conct. 1:5:10 Of specified grade excluding the cost of form work, cement using 40mm N/ size of agg.
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) crushed
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). crushed
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer in-charge. 23.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with brick of class designation 75 above plinth level upto floor V level in cement mortar 1:6
Extra for brick work with common burnt clay brick/cement concrete brick in super structure above plinth level upto floor five level
FILLING AVAILABLE EXCAVATED EARTH IN TRENCHES , PLINTH, SIDES OF FOUNDATION LAYERS NOT EXCEEDING 20 CM IN DEPT , CONSOLODATING EACH LAYER BT RAMMING AND WATERING
Centring and Shuttering including strutting, propping etc and removal of form work for Foundations, footings, bases for columns.
Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams,girders, bressumers and centilevers.
Centring and Shuttering including strutting, propping etc and removal of form work Suspended floors, roofs, landings, balconies and access platform
Centring and Shuttering including strutting, propping etc and removal of form work Columns, pillars, piers, abutments, posts and struts
Centring and Shuttering including strutting, propping etc and removal of form work for Edges of slabs and breaks in floors and walls.Under 20cms wide
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood
Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30mm
Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges, second class deodar wood 30 mm thick
Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63mm for doors, windows and clerestory windows with hinges and necessary screws, second class deodar wood
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 250*10 mm
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm handles
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm handles
Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing aluminum pull bolt lock anodized ISI marked (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws bolt nuts and washers etc. complete.
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand over a priming coat red oxide on new steel work two or more coats
Providing/laying 12 mm cement plaster of mix 1:4 fine sand
Providing 15 mm cement plaster of mix 1:6 fine sand
6 mm cement plaster to celling of mix 1:3 fine sand
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
Providing and applying white cement based putty of specified thicknessof approved brand and manufacturing over the plastered surface wall surface to prepare the surface even and smooth complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in railing
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
Wiring for light points, fan point ,exhaust fan point,call bell pointwith 1.5sqm FRLS PVC insulated copper conductor single core cablesin surface/recessed medium class PVC conduit,with piano typeswitch phenolic laminated sheets,suitable size MS bOx with earthing the pointswith 1.5sqm FRLS PVC insulated copper conducted single core cables etc.
Providing and installation of Ceiling Fan(complete job)
Re-lettering with black Japan paint of approved brand and manufacture.
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.
Carriage of material with in avg. Lead from source to site of work Sand 10 KM by M.T
Carriage of material with in avg. Lead from source to site of work Agg. 10 KM by M.T
Thirty Four Lakh Ninety Five Thousand and Paise Eighty Three Only
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.28 MB
BOQ_977742.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid