SPECIAL REPAIR TO BLDG NO P 08 CARIAPPA ROAD PROVN OF 01 NO GARBAGE BIN NEAR MT PARK AT HQ 7 INF BDE SPL REPAIR TO BLDG NO 9D AT STN HQ AND OTHER WORKS UNDER GE I KANPUR

Amount

M&L for APP modified membrane pre-fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS- 3384 @ 0.4 Lit/Sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions with and including removing of old treatment complete all as specified and directed with following courses of descriptions given below :- (a) Second coat of binding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm. (b) Third course i.e. laying of APP modified membrane described hereinbefore with joints sealed with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and curved well before lying the membrane. (c) Fourth course of binding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm.

M&L For aluminium paint 100ml/Sqm over treated surface on roof complete all as specified and directed.

Cutting groove in brick wall, 75 mm wide and 65 mm deep and shaping horizantal face of groove witn CM (1:3) complete all as specified and directed.

M&L for cement concrete type B0 (1:2:4 ) by using 12.5 mm graded stone aggregate as in coping, roof kerb incl hunching, benching padding roof etc complete all as specified and directed.

Material & labour for 10 mm thick plastering on roof in cement mortar (1:4) with using WPC @ 3% by weight of cement incl finishing the surfaces even and smooth without using extra cement all as specified and as directed. Note : WPC shall be measured and paid separately

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110 mm dia including taking down old pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with any radius etc complete all as specified and directed.

Dismantling floors, hearth or wall tiling including cement morter bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of concrete surfaces in ground floor and paving not exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) as in flooring as a leveling coarse cement concrete surface all as directed.

M&L Vitrified tiles, light shade,10 mm thick (square/rectangular) polished, area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, laid in floors with neat cement slurry over 15 mm thick screed bed in cement mortar 1:6, including pointing in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L Vitrified tiles, light shade,10 mm thick (square/rectangular) polished, area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, laid on wall with rendering cement plaster 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 for skirting tiles complete all as specified and directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:6 ) complete all as specified and directed. Note: Colour, design and pattern shall be approved by GE(I).

M&L for 7 to 8 mm thick Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over laid on wall with rendering cement plaster 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 for skirting tiles. Note: Colour, design and pattern shall be approved by GE(I).

M&L for Non skid coloured ceramic tiles 7to 8 mm thick (square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, laid in floors with neat cement slurry over 15 mm thick screed bed in cement mortar 1:6, including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size (450x300mm)x7 mm thick, laid on vertical surface such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set in cement to match the shade of tiles complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, hacking for keys, scrubing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick cement plaster in Cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick in (1:4) with mixing integral water proofing compound as per manufacturer's instruction & finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing compound shall be measured and paid separately.

M&L Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying one coats of oil bound distemper (of approved shade) over 2 mm thick wall care putty complete all as specified and directed.

M&L for Preparation of new wall surface and applying 2 mm thick wall care putty, finished even and smooth and applying two coat of oil bound distemper complete all as specified and directed.

M&L for Preparation of new Plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Supply only water proofing compound ISI marked complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in cement mortar (1:3) on RCC Ceiling up to 7 meter height, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on celing including preparation of new surfaces complete all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store complete all as specified and directed.

M&L for GI tubing of medium grade 15 mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for GI tubing of medium grade 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs Stop valves 20 mm bore cast copper alloy screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe complete all as specified and directed.

M&L for 15 mm bore central hole basin mixture, chromium plated, without popup waste system with 450mm long braided hoses pipe fixed in repair complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

M&L for 15 mm bore Wall mixture with overhead shower with 115 mm long bend pipe on upper side connecting legs & wall flanges complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

S&F in repair Mirror cabinet of PTMT Alloyetc complete all as specified and directed. Make : Prayag

S&F in repair SS hand health faucet for water closet, pedastal pattern complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

S&F in repair 125mm dia shower rose, Brass , chromium plated with swivel joint complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

S&F in repair, full pedestal vitreous china wash hand basin of size 55 x40 x 82 cms, flat back size white including waste coupling of PTMT 32 mm complete all as specified and directed. Make: Hindware /Parryware/Cera as approved by GE

S&F in repair 15mm Bip taps, cast copper alloy (chromium plated) with crutch handle or butter fly handle screwed down , screwed for iron pipe complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

S&F 15mm bore Angle valves cast copper alloy , cast copper alloy, chromium plated, screwed down high pressure with crutch and butter fly handles, screwed both ends with for iron pipes or for union complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

S&F Conceled stop cock 15 mm bore, cast copper alloy, chromium plated, screwed down high pressure with crutch and butter fly handles, screwed both ends with for iron pipes or for union complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

S&F in repair CP Two Way Bib cock with wall flange complete all as specified and directed. Make: Jaquar /Plumber/Prayag/Hindware as approved by GE

M&L for cascade type China ware closet pedastal pattern of superior special colour including fixing bolts, fushing cistern with twin flush fitting and sheet cover of same quality and colour complete all as specified and directed. Make: Hindware /Parryware/Cera as approved by GE

S&F in repair PVC valve less, syphonic action type, flushing cistern, low level, 10 litres capacity, white with inlet float ball valve, PVC flush pipe and handle, making proper fixing and hanging arrangements over old brackets including taking out old flushing cistern complete all as specified and directed.Make: Hindware /Parryware/Cera as approved by GE

S&F in repair Vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore fixed in PCC 1:2:4 type B-2 complete all as specified and directed. Make: Hindware /Parryware/Cera as approved by GE

S&F in repair Corner shelf with frame triple, chromium plated, complete all as specified and directed.

S&F in repair Toilet paper holder, chromium plated complete all as specified and directed.

S&Fin repair Towel shelf, chromium plated complete all as specified and directed.

S&F in repair front shelf, with frame, chromium plated complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 300 mm complete all as specified and directed.

S&F Soap dish , chromium plated complete all as specified and directed.

Dismantling water tanks of capacity exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt- I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia PVC float valve assembly complete all as specified and directed. Make: Sintex/ Dhara/Tuff/ JS Polyplast as approved by GE(I).

Taking down chowkhats or frames not exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each from chowkats complete all as specified and directed.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints wood and making good to disturbed surfases of wall complete all as specified and directed.

S&F 35 mm thick plain, framed, panaled shutters (any number of panals) with pannels of timber flat on both sides (feather edges ) or of veneered partical boards medium density, wood partical boards with commmercial face veneeres complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters (Three panel) of IInd class HW, open rebated and prepared to receive glass, gauze, etc. ( without sash bars) edge of framming plain chamfered, or rounded, fitted with cut and mitred beads for securing glass etc, size of member of shutters as specified in SSR part- I , section 8, clause 8.20(a) complete all as specified and directed.

S&F 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.

S&F 100 mm butt hinges medium weight, cold rolled mild steel ISI marked and fixed with mild steel wood screws complete all as specified and directed.

S&F 125 mm size aluminium handle febricated type anodised complete all as specified and directed.

M&L for Mild steel framed work as in doors /chowkhats or gates of angle or other section with gusset plates rails, braces, staircase etc, complete, drilled for fixing of steel sheeting etc prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and confirming to FE-410-W (Gde-E-250) complete all as specified and directed.

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed .

M&L for applying two coats of synthetic enamel paint over a coat of zink oxide primer on steel surfaces including preparation of new surfaces of any description complete all as specified and directed.

S&F Galvanished mild steel wire cloth, 0.36 mm nominal dia of wire & average width of aperature 1.40 mm & fixed with tinned tacks, galvanised wire staples complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 200mm long , of extruded section complete all as specified and directed.

S&F aluminium handles, 150 mm size, cast type complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail door spring etc complete all as specified and directed.

S&F Fancy type dropery rods of 20mm dia, powder coated aluminium of colour brown/ Cherry / Iovery as in doors/ windows pelmets and MS brackets fancy type, powder coated including screws and other necessary fitting for fixing brackets funnels for 20mm dia dropery rods, fixed at each end of rods of golden colour complete all as specified and directed.

S&F Ball and catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

S&F 40mm width Continuos (piano) hinges of brass complete all as specified and directed.

S&F Solid PVC door frame (single rebated of size 60mm x 30mm) made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal sttifner and fixed with 100x8mm sheet metal CSK scews complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters with partical board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face in frame at site as per specification & drawing complete all as specified and directed.

S&F in repair aluminum powder coated (powder coated required clour) three track sliding window frames of size 92 x 45.50 x 1.50mm thick and shutter frames of size 40 x 18 x 1.55mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40 mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick tinted glass with necessary rubber beading gasket etc complete all as specified and directed.

S&F in repairs Powder Coated aluminium ventilator frame and shutters, side hung type without sash bars, aluminium section weighing o.555 kg/m including necessary jointing cleats, glazing clips rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as pep stay 150 mm long (1No.), hinge type B-21, 100mm long ( 02 N0s), suitable handel ( 1 No.) including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick tinted glass with necessary rubber beading gasket etc complete all as specified and directed.

S&F aluminium chequered grills as in aluminium windows, weight not less than 1.20Kg/Sqm complete all as specified and directed.

S&F in repair 3mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4 mm fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repair 3mm thick Sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 Sqm in each pane including hacking out complete all as specified and directed.

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scraping down smook soots moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed.

M&L for preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scraping down moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of cement based paint complete all as specified and directed.

S&F Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DUNE (MICRO LOOK) EDGE TILES WITH ARMSTRONG XL 15 mm EXPOSED STEEL ANGLE. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0 /Class 1 (BS 476 Part 6 & 7) in module size of 600X600X16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The steel angle should be of “Armstrong” make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32, 27 and 27mm and a load carrying capacity of 7.5 Kgs/Sqm. The T Sections have a Galvanizing of 90 grams per Sqm & passed through 500 hrs of Salt test, Perimeter Trim to be Armstrong wall angles of size 30x19x19mm, secured to walls at 450 mm maximum centre to centre hanging with 4 mm GI wire according to manufacturers instruction including taking down old false ceiling complete all as specified and directed.

Excavation in trenches in soft/loose soil not exc 1.5 mtr in width and not exc 1.5 mtr in depth and getting out for laying of cables and for rerouting of cables etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm each complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate) in Foundation / Mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded aggregate) in Foundation / Mass concrete complete all as specified and directed.

M&L for Brickwork with sub class 'B' Bricks bricks (using old size bricks), straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick, finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of colour wash complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 Type B-0 (12.5 mm graded agg) as in leveling /sub base of flooring complete all as specified and directed.

S&F aluminium anodised frame for doors and partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F 9mm thick prelaminated particle board both side decorative choice lamination with rubber beading complete all as specified and directed.

S&F 5.5mm thick ordinary quality sheet glass including rubber beading complete all as specified and directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F Aluminium Mortise Lock vertical type of size 65mm brass, 4 levers complete all as specified and directed.

S&F Aluminium anodized barrel tower bolts 200mm long of extruded section complete all as specified and directed.

S&F Floor door stopper overall 140mm long of aluminium alloy body and tongue anodized with hard drawn steel spring complete all as specified and directed.

S&F Butt hinges of size 100mm (B-21), extruded aluminium alloy with galvanised mild steel hing pin, anodised complete all as specified and directed.

M&L for surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose siol complete all as specified and directed.

M&L for 100mm thick, PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in base concrete of top layer complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness , M-40 grade, set, jointed with grey cement and no pigment over 25 mm thick sand cushioning complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement morter 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves ( thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm grade stone aggregate as in edges of interlocking tile / sides complete all as specified and directed.

Structural Design, working drawing and submission of report for RCC slab & beam of span 20.50mx 9.07m over load bearing wall having existing arch type slab which to be demolished and to be recasted. Note : 1. Either design / Drawing is to be carried out by Govt Engineering College / Institute / University or it is vetted by Govt Engineering College / Institute / University if design / Drawing is done from consultency working in MES / experienced reputed consultency . 2. The recommended steel section should be easily available in the market. 3. The report, working drawing and structural drawings to be submitted in triplicate.

EnM Schedule

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified and directed.

M&L for point wiring for one light / fan / bell point controlled by one switch with PVC (FRLS) insulated and unsheathed cable 1.5 Sqmm (Nominal area) multi-stranded copper conductor single core with proper colour coding including PVC conduit medium grade of 20mm dia concealed in walls and surface on ceiling with and including pressed steel concealed terminal boxes of appropriate size and top cover 3 mm thick of plastic laminated sheet ISI marked of desired colour of make : Hylam, painting terminal boxes inside and outside with a coat red oxidé primer complete with all accessories with and including 1.5 Sqmm PVC insulated and unsheathed green colour multi-stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed. Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and, surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor.

One light / fan / bell / exhaust fan point controlled by one switch.

One 3 Pin socket outlet 5 Amps on Independent board.

One 3 Pin socket outlet 5 Amps on same board.

All as per item No 111 here in before but for point wiring with 2.5 Sqmm (Nominal area) FRLS, PVC insulated and unsheathed copper conductor multi-stranded single core cable including green colour earth wire of size 1.50 Sqmm FRLS, PVC insulated and unsheathed copper conductor multi stranded single core cable for one 3 pin, 15 Amps socket outlet independent point complete all as specified and directed.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F switch piano flush type 15/16 Amps 240 Volts single pole one way complete all as specified and directed.

S&F socket outlet flush type, 5 pin 6 Amps, 240 Volts complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin 5 & 15 Amps, 240 Volts complete all as specified and directed.

S&F ceiling rose surface bakelite of three terminals 240 Volts complete all as specified and directed.

S & F of lamp holder insulated body with back plate suitable for batten / conduit fitting complete all as specified and directed.

S&F bell electric heavy duty "Ding Dong" type 230 Volts, single pole complete all as specified and directed.

S&F bell push flush type 5/6 Amps single pole one way complete all as specified and directed.

M&L for submain wiring with two single core 4 Sqmm copper conductor PVC insulated and unsheathed multi-stranded cable (FRLS) including PVC conduit medium grade of 25 mm dia, concealed in walls for sub main connection and 4 Sqmm PVC insulated and unsheathed multi-stranded green colour copper conductor cable (FRLS) as an earth wire to common earth and connected to earth dolly and including PVC conduit medium grade of 25mm dia concealed in walls and surface on ceiling complete all as specified and directed. Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and, surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor.

S&F single pole and neutral enclosure with a top pin and earth plug and socket complete with one SP MCB 25 Amp, 240 Volts complete all as specified and directed. Make : Havells Cat Part No. DHDMCDPO253025 or equivalent make of Legrand / Siemens / ABB.

S&F in replacement of old light fitting with LED tube light fitting high efficiency extruded aluminium housing linear batten 20/22 watt (6500K) fixed on wall/ceiling complete with all accessories along with LED tube rod 20/22 watt and provision of flexible 1.50 Sqmm copper conductor cable from ceiling rose to light fitting and other fixing arrangement as required at site complete all as specified and directed. Make : Wipro / Havells / Phillips / Bajaj Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S&F in replacement of LED wall security light 25 watt, pressure die- cost aluminium IP-66 road way luminaries with high power LED as light source with acrylic cover with suitable size bracket fixed with clamps, nut bolt, washer and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting complete all as directed Make: Havells cat part no SL25WLED 757SASYTOPCMP/ WIPRO cat part no LR02-291-xxx-57-xx/ C&S cat part no INDUS-E/25W LTESSE25WLED/Bajaj cat part no BCLST25WLEDIV2 or equivalent in Philips/CG. Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S&F in replacement of LED light fitting recess mounted 36 Watt, 2' x 2' with all accessories suitable for amstrong/ grid/ POP ceiling complete with integrated electronic driver and making electrical connection properly all as directed. Make : Bajaj/ Havells/Philips/ Wipro/Crompton/C&S

S&F in replacement of LED post top lantern 35/ 40 Watt warm white made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP-65 protection fixing with proper arrangements and making electrical connection complete all as spfd. Make Bajaj/ cat part No BGCT W4 LED WW or equivalent to Havells/ Phillips/ Wipro/Crompton/C&S

S&F in replacement of LED mirror light fitting 10/11 Watt (1' long), 6500K, IP-65, with efficient heat dissipation & intigrated electronic driver complete including connecting electrically with 1.5 Sqmm, 2 core wire complete all as specified and directed. Make : Bajaj/ Havells/Philips/ Wipro/Crompton/C&S Note: Contractor will submit guarantee/warranty certificate from manufacturer.

S&F sheet metal enclosure double door factory made MCB distribution board Single pole and neutral 240 Volts, 8 way with neutral and earth bus bar having IP-43, IK-09 protection and double door metal concealed/flush to wall surface including making connections with thimbles as required complete all as specified and directed. Make : Schneider / L & T / Legrand/C&S/ Indo Asian/Havells

S&F sheet metal enclosure double door factory made MCB distribution board Single pole and neutral 240 Volts, 4 way with neutral and earth bus bar having IP-43, IK-09 protection and double door metal concealed/flush to wall surface including making connections with thimbles as required complete all as specified and directed. Make : Schneider / L & T / Legrand/C&S/ Indo Asian/Havells

M&L for MCB single pole, 240 volts 6 to 32 amps, with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. Make : Schneider / L & T / Legrand / Indo Asian / C&S / Havells / ABB

M&L MCB SPN, 240 volts 32 to 63 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. Make : Schneider / L & T / Legrand / Indo Asian / C&S / Havells / ABB

M&L for earthing with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate of SSR (Part-l) including necessary excavation, earth work, GI pipe 15 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade watering pipe etc. including concrete chamber of PCC 1:2:4 type B-2 (using 40mm graded stone aggregate), copping in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate), internal surface of concrete chamber shall be plastered with 12 mm thick cement mortar 1:4 and 50 mm thick RCC cover in pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia TMT bar @ 80 mm c/c both ways and charcoal dust, common salt etc. including testing after completion complete all as specified and directed.

M&L for sand filling and cushioning to underground cables, 8 cm thick before laying the cable and 15 cm thick after laying, stretching and testing the cable or filling under floors complete all as specified and directed. Note : Only punned thickness shall be measurement and paid.

Supply and laying sub class 'B' bricks old size 230mm x 115mm 75mm for cable protection complete all as specified and directed.

M&L for Drilling manually in soft / loose soil under road / hardstanding / culvert / nala of suitable bore for cable protection pipe upto 80mm bore complete all as specified and directed. Note : Depth of bore shall not be more than 1 Mtr from original ground level.

Supply and laying in replacement of GI tubing of 50mm bore dia, light grade conforming to IS 1239 Part -I and ISI marked in trenches, across the road, on wall or poll including fixing arrengement, culvert etc of required length for cable protection complete all as specified and directed.

Disconnecting electrically and taking out old unserviceable LT Under Ground Cable of size 6 Sqmm to 35 Sqmm complete all as specified and directed.

Supply and laying XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 35Sqmm, 3.5 core in trenches or fixing to wall/pole or passing through pipe including making good disturbed wall surfaces/ flooring/ tilling to match with existing specification complete all as specified and directed.

Supply and laying XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm, 2 core in trenches or fixing to wall/pole or passing through pipe including making good disturbed wall surfaces/ flooring/tilling to match with existing specification complete all as specified and directed.

Supply, installation, commissioning of glass Top, steel body, corrosion resistant Deep freezer, minimum 320 Ltr and not more than 401 liter capacity double door, high density puf insulation for better holding time, high energy efficient compressor and ceo friendly gas refrigerant, single phase 240 volt, 50Hz complete all as specified under the scope of IS 7872 with all amendments.Make: Voltas/Blue Star/L&T/Whirlpool as approved by GE.

Allied Builders And Engineers

M/S MAA TARA TREATMENT PROJECT

AJAY CONSTRUCTION COMPANY

ESKEY COMPANY

LAKSHMI ENTERPRISES