Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.3 LAccepted-AOC | ₹40.3 L Quoted ₹41.7 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹41.8 L+₹796 (0.02%)Rejected-AOC PLOT NO 28 SANTOSHIMA COLONY WEST MARREDPALLY SECUNDERABAD 500026 | HYDERABAD | TELANGANA | 500026 | ₹41.8 L+₹796 (0.02%) | L2 | Rejected-AOC Being not L1 |
| 3 | L3₹42.2 L+₹46,108 (1.10%)Rejected-AOC | ₹42.2 L+₹46,108 (1.10%) | L3 | Rejected-AOC Being not L1 |
| 4 | L4₹42.8 L+₹1.1 L (2.53%)Rejected-AOC | ₹42.8 L+₹1.1 L (2.53%) | L4 | Rejected-AOC Being not L1 |
| 5 | L5₹44.5 L+₹2.8 L (6.63%)Rejected-AOC | ₹44.5 L+₹2.8 L (6.63%) | L5 | Rejected-AOC Being not L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Jun 2022, 6:00 pmClosed
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
REPAIRS MAINTENANCE OF INTERNAL ELECTRIFICATION WORKS AT ZONE C D AREA UNDER AGE E M N OF GE NORTH SECUNDERABAD
2022_MES_520560_2
8578
Open Tender
Electrical and Maintenance Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER NORTH SECUNDERABAD
₹90,000
Yes
22 Jul 2022
7 Jun 2022
30 Jun 2022
7 Jun 2022
28 Jun 2022
14 Jun 2022
Amount
Taking down the existing unserviceable point wiring of any description, type, size of light or fan or power or two way or bell etc on TW batten or conduit including removal of batten or conduit or gutters or wooden boards or switches or sockets or regulators or light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall or ceiling to match with the existing surfaces complete all as specified and as directed.
Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked on surface etc., with new sunk type pressed steel terminal boxes suitable for switches duly painted with two coats of red oxide zinc chrome primer with suitable hylam sheet cover of suitable size for mounting of switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light / bell point controlled by one, one way switch 5 amps, single pole.
All as per item No. 2 above but one ceiling fan/exhaust fan point controlled by one, one way switch 5 amps, single pole and regulator complete all as specified and as directed.
All as per item No. 2 above but one 3 pin 5 amps switch socket out let point controlled by one switch on independent board complete all as specified and as directed.
All as per item No. 2 above but one 3 pin 5 amps switch socket out let point controlled by one switch on same board complete all as specified and as directed.
All as per item No. 2 above but one light point controlled by two, two way switch 5 amps, single pole complete all as specified and as directed.
All as per item No. 2 here in before but using 2.5 square millimetre single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade FRLS confirming to IS-694 for 3 pin 15 amps switch socket combination point on independent board and running of 2.5 square millimetre copper conductor PVC insulated cable FRLS as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.
S & F switch piano, single pole one way, flush type, 5 Amps 230 volts for light, fan and tube light complete all as specified and as directed.
S & F switch socket combination 2 in 1, multipurpose 3/5 pin of 5 amps, flush type complete all as specified and as directed.
S & F switch socket combination 2 in 1, multipurpose 6 pin of 15 amps, flush type complete all as specified and as directed.
S & F fan regulator, 5 stepped, electronic type, single phase, socket size complete all as specified and as directed.
S & F bell push piano type of 5 Amps SP, 230 volts AC complete all as specified and as directed.
S & F bell ding dong type working on 230 volts single pole AC supply complete all as specified and as directed.
S & F two way switch piano, single pole, flush type, 5 Amps 230 volts complete all as specified and as directed.
S & F Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed.
S & F Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed.
S & F wall mounted indus plus LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc., with necessary mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W including taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : Havells cat No-REGALBATTENT8UPTO 1X22WSSBSWH incl Tube Rod cat No-PHOTONULTRA2.01213T8SSTL20WLED 865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE & Philips Cat No. TMC501P1XT-LED22WP3241 incl LED tube 20W.
Supply and fix in replacement LED security light luminaire fitting of 1x25 watts with deep drawn housing including all accessories complete all as specified and as directed. Make: Havells Cat No - VILUMINASL25WLED 757SASYBOPC, Wipro Cat No LLR06-311-XXX-57-XX & Philips Cat No BRP046LED30CWMRS 1PSVGR
S & F in replacement recess mounting with perforated sheet with electronic driver luminaire 36 watts LED slim panel with central opal diffuser series mounted in ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting, with 36 watts LED lamp complete all as specified and as directed. Make:Havells Cat No - STARTO2X2PLR36WLED 840MOD incl driver LED DRIVER36V36WS, Wipro Cat No - CRCO23R036HP65G3 & Philips Cat No. RC383BLED36S-6500PSVODWHDIR
S & F wall mounted Indus plus LED Batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x10W, 230 Volts, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as specified and as directed. Make: Havells Cat No LUMILINEPLUSBS10WLED 865SPCSS, Wipro Cat No - LL20-111-XXX-65NE3 & Philips Cat No. BND21LED10S-6500PSUGRS1
S & F vertical type TPN distribution board of 4 way double door with incoming MCCB TPN 415 volts AC, 3 phase, 50 Hz, 25 KA Breaking Capacity with fixed magnetic setting for current ranging of capacity 100 Amps including MCCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommodated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated and taking down old unserviceable DB complete all as specified and as directed. Make : Havells-Cat Part No VTPN_DHDLVDRWGOF O04 & MCCB Cat No - IHLGHF0100, Standard Cat No - DSDLVDRBAOFO01 & MCCB Cat No - ISLASF0100, C&S Cat No - CSDBMCCB100DD041P43S & MCCB Cat No - CSC3S4100.
S & F sheet metal enclosure MCB DB SPN 8 Way with 200 Amps rated bus bar of 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 12 Way with 200 Amps rated bus bar of 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 4 Way with 200 Amps rated bus bar of, 240 Volts, double door with magnetic locking system for fixing MCB’s / isolators including taking down existing old unserviceable MCB DB complete all as specified and as directed.
S & F MCB SPN 40 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed.
S & F MCB SP 6 to 32 amps 240 volts 'C' curve suitable for fixing in MCB DB including taking down existing old unserviceable MCB complete all as specified and as directed.
Material and labour for sub main wiring with two runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 6 square mm and drawing through PVC conduit of 25mm dia with accessories on surface in wall/roof along with one run of 6 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 6 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.
Material and labour for sub main wiring with two runs of single core FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 4 square mm and drawing through PVC conduit of 20mm dia with accessories on surface in wall/roof along with one run of 4 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and as directed. Note: 3 runs of 4 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.
S & F in replacement MCB SPN 40 amps 240 volts suitable for fixing in MCB DB complete all as specified and as directed.
S & F in replacement MCB SP 6 to 32 amps 240 volts suitable for fixing in MCB DB complete all as specified and as directed.
S & F in replacement MCB TP 63 amps 415 volts suitable for fixing in MCB DB complete all as specified and as directed.
S & F in replacement MCB TPN 63 amps 415 volts suitable for fixing in MCB DB complete all as specified and as directed.
S & F in replacement Rigid PVC conduit 20 mm dia with necessary accessories complete all as specified and as directed.
S & F in replacement Rigid PVC conduit 25 mm dia with necessary accessories complete all as specified and as directed.
S & F in replacement Switch piano 5 Amps capacity flush type single pole one way 230Volts complete all as specified and as directed
S & F in replacement Switch piano 15 Amps capacity flush type single pole one way 230Volts complete all as specified and as directed
S & F in replacement socket outlet flush type multipurpose 3/5 pin 5 amps, 230 Volts complete all as specified and as directed.
S & F in replacement socket outlet flush type multipurpose 6 pin 15 amps, 230 Volts complete all as specified and as directed.
S & F in replacement switch socket combination 2 in 1, multipurpose 3/5 pin 5 amps, flush type, 230 Volts complete all as specified and as directed.
S & F in replacement switch socket combination 2 in 1, multipurpose 6 pin 15 amps, flush type, 230 Volts complete all as specified and as directed.
S & F in replacement Modular switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed
S & F in replacement Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.
S & F in replacement Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and as directed.
S & F in replacement MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and as directed.
S & F in replacement MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and as directed.
S & F in replacement Switch MODULAR 1 WAY 16 amps, 230 Volts on existing board including taking down complete all as specified and as directed.
S & F in replacement electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.
S & F in replacement electronic ceiling fan regulator 5 stepped type heavy duty switch/socket type suitable to work on 230 volts complete all as specified and as directed
S & F in replacement Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed on PVC round blocks complete all as specified and as directed.
S & F in replacement ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed
S & F in replacement Call bell buzzer type 230 Volts AC complete all as specified and as directed.
S & F in replacement PVC rectangular junction box (gang box) with piano type switch socket combination for 5 pin, 6 amp, 240 volts AC for fixing in surface complete all as specified and as directed.
S & F in replacement PVC rectangular junction box (gang box) with piano type switch socket combination for 5 pin, 16 amp, 240 volts AC for fixing in surface complete all as specified and as directed.
S & F in replacement MODULAR plate for 2 & 3 module, regular white for fixing on existing metal box complete all as specified and as directed.
S & F in replacement MODULAR cover plate for 4 & 6 module, regular white for fixing on existing metal box complete all as specified and as directed.
S & F in replacement MODULAR cover plate for 8 module, regular white for fixing on existing metal box complete all as specified and as directed.
Supply and fix in replacement of batten for light fitting T5 & T8 tube light without tube rod complete all as specified and as directed. Make: Havells Cat No REGALBATTEN8UPTO 1X22 WDSBSWH, Wipro Cat No - LL13-181-65SE & Philips Cat No TMC501P1XT-LED22WP3241
Supply and fix in replacement Ultra bright LED polycarbonate tube light 20 watt with very high efficiency suited for installation in existing T8 fitting with G13 lamp holders (single side connection) complete all as specified and as directed. Make: Havells Cat No PHOTONULTRA2.012 13T8SSTL20WLED865SPC, Wipro Cat No WI0922208 & Philips Cat No 1200MM20W865 T8INDI
S & F in replacement LED driver for LED light fitting 1x36Watt, complete all as specified and as directed.
Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, CI cover with CI frame hinges, galvanised iron funnel with watering pipe, wire mesh, complete.
M & L for cutting chases, pining to making good to facing where ever required and pointing in cement motor 1:3 to ends or edges of endings, steps, cills etc and cutting chases for concealed wiring making good and cutting not exceeding10 cm girth complete all as specified and as directed.
Taking down ceiling fans 48"/56" sweep, cleaning the dust properly, oiling and greasing of bolts and bearings including refixing and connecting up complete all as specified and as directed . Note : Defective /worn out parts if required shall be measured and paid separately under relevant items in this schedule.
S & F in replacement Fan condenser of capacity 2.00/2.50 Mfd complete all as specified and as directed.
S & F in replacement sealed ball bearing suitable for ceiling fan of size 1200/1400mm sweep complete all as specified and as directed.
S & F in replacement Flexible copper wire/ cable three core of size 23/76" complete all as specified and as directed.
S & F in replacement Rubber bushes with 'U' type MS clamp, bolt, nut and split pins of heavy duty suitable to existing fan complete all as specified and as directed .
S & F in replacement Mild steel rod for ceiling fans of 3ft long duly screwed threads with check nuts & pin for ceiling fan complete all as specified and as directed
S & F in replacement Nut and bolts washers for fan blades fixing of ceiling fan of any make/size/type (6 Nos for each set) complete all as specified and as directed .
M & L for rewinding the burnt ceiling fan motor with super enameled copper wire of suitable size for 1200 to 1400 mm sweep of any make, type, model including necessary transportation complete all as specified and as directed.
Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser and carrying out the following works complete all as specified and as directed:- (a) Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers. Note : Defective /worn out parts if required shall be measured and paid separately under relevant items in this schedule.
S & F in replacement rubber PVC gasket to ensure water tightness for 25 Litres capacity complete all as specified and as directed
S & F in replacement mild steel base plate cup of any type with screws of suitable size complete all as specified and as directed
S & F in replacement heating element of the 1/1.5 KW rating including rubber washers of any make and type complete all as specified and as directed.
S & F in replacement thermostat for the geyser of 25 to 35 litres capacity complete all as specified and as directed
S & F in replacement of PVC insulated multistrandard copper conductor, 1100 Volts grade, un sheathed, 3 core of 2.5 square mm size complete all as specified and as directed.
S & F in replacement industrial type plug top 2 pole with earth plug of 20 Amps of 240 volts capacity complete all as specified and as directed.
S & F in replacement single pole and neutral sheet metal enclosure with a two pin and earth plug and socket with single pole MCB 20 Amps 240 volts complete all as specified and as directed.
S & F in replacement PVC connecting tube of 600mm long with two brass adopters suitable for hot water of 15mm dia pipe superior quality complete all as specified and as directed.
S & F in replacement steel inner tank for 25 litres capacity geyser complete all as specified and as directed.
S & F in replacement Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire 10Watt comprising of high brightness LEDs complete all as specified and as directed. Make: Havells HEXAFT10WLED857SSYMB OPC/Philips cat part No WT202WLED6SNWPSUS 2PC or equivalent in Bajaj/Wipro as approved by GE.
S & F in replacement GI bracket 40 mm dia 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and as directed.
Universal refrigeration and Engineering Company
gsrinivasarao
Sri Balaji Enterprises
M/S P UDAY RAJ CONSTRUCTION
G.MADAN MOHAN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .