CONSTRUCTION OF FLIGHT TOOL STORE AND TOOL CRIB AT 2232 SQN AT AF STN BKT

Amount

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors complete all as specified and as directed.

M&L DPC with 40mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) mixed with water proofing compound including necessary form work . Note: WPC Will be measured and paid seperately.

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L Brick work with fly ash old size bricks, straight or curved to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed. .

Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cmwith excvated soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M&L RCC (Design Mix M-25), type B1, 1:2:4 (20mm graded stone aggregate) as in foundation, rafts,footings, beams,pinth beams,bases for columns,etc;basement slabs,under-reamed piles and mass concrete complete all as specified and as directed.

M&L RCC (Design Mix M-25), type B1, 1:2:4 (20mm graded stone aggregate) as in beams , cantilevers, bressmummers, lintels over 1.5 m span complete all as specified and as directed.

M&L RCC (Design Mix M-25), type B1, 1:2:4 (20mm graded stone aggregate) as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Form work to sides of concrete foundations,footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beam;and similar work;vertical or to batter etc for rough finished flat surfaces of concrete complete all as specified and as directed.

Form work to sides of pillers, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed.

M&L Form work to sides and soffits of floor or roof beams , beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L Form work to chullah hoods,chajjas,troughs and similar items including edges complete all as specified and as directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs,landings and similar works : not exceeding 200mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

M&L Form work to edges of concrete flats, treads,breaks in floors, window cills, concrete railing, openings in concrete walls, floors and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls,horizontal or sloping and similar work exc 10cm but n exc 20 cm wide for rough finished surfaces of concrete complete all as specified and as directed.

S&F MS TMT bars,10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item 18 above but 6 mm to 8 mm dia complete all as specified and as directed.

All as per item No 18 above but 5 to 10mm dia as in stirrups & links etc complete all as specified and as directed.

Rendering 10 mm thck in CM 1:4 mixed with integral WPC on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing surfaces even and smooth without using extra cement ( WPC shall be measured seperately).

Supply only Liquid water proofing compound complete all as specified and as directed and as per manufacturer instruction.

Material and labour for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and smooth without using extra cement (up to 4th storey) with necessary scaffolding complete all as specified and as directed by Engineer-in-charge.

Material and labour rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L Prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of Weather proof paint in camouflaging pattern (combination of three colour) over one coat of primer (up to 4th storey) with necessary scaffolding) complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick or concrete surface as in ceilings with cement mortar 1:3, rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L three coats of white wash on ceiling on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

Material and labour for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished rough to receive the floor tiles etc complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using (40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M & L Machine cut kota stone slab flooring (Minimum size shall be 550mm x 550 mm) 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete,laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Machine cut kota stone 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade/colour of tiles,laid over and including 10 mm thick rendering in cement mortar 1:4, as in riser of steps,skirting,dado & vertical surfaces complete all as specified and as directed by Engineer-in-charge.

Material and labour 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as specified and as directed.

M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls complete all as specified and as directed.

Material & labour for pressed steel frame of size 105mm x 60mm made out of 1.25mm sheet for doors single rebated including mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building complete all as specified and as directed.

S&F Flush shutters, 40 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for preparation of new or previously untreated wood or wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling of same colour where required to achieve smooth and even surfaces complete all as specified and as directed.

Supply and fixing Aluminium anodised barrel tower bolt of extruded section of size 125mm(ISI marked) complete all as specified and as directed.

Supply and fixing Aluminium anodised handles 125mm size all as specified and directed (ISI marked) complete all as specified and as directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodized and fixed complete all specified.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including locking arrangements complete all as specified and as directed.

Material & labour for framed work such as grills grating etc with ends of bars shouldered and /or riveted , or forged into spike; framed guard bars, barred iron doors, leaders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Supply and fixing Sheet glass ordinary quality 3mm thick and glazed with oil putty or any types of beads in square n.exc 0.5 Sqm each pane in any type of frame complete all as specified and as directed complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of zink chrome primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) as in levelling course of floors, finished even and smooth complete all as specified and directed.

Supply & laying well burnt sub class 'B' bricks, locally best available laid in trenches for protection of underground cable complete all as specified & directed.

M&L for dry sand cushioning for protection of LT underground cable including watering & consolidation complete all as specified & directed. Note:- Punned thickness will be measured for payment

M&L GI Tubing light grade with all fittings and fixed complete to wall , poles and ceiling or laid in floors of size 40 mm dia complete all as specified and directed. Make- TATA/ JINDAL/ ZENITH

Supply, laying in trenches/ducts/through pipe/on wall/floor/ceiling, connecting and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 core,complete all as specified and directed. Make of cable - Finolex/ Grandlay/ Havells/ RPG(Asian)/ RR Kable

S&F Sheet metal enclosure double door type 8 way for distribution board when MCB to be used SPN 8 way 240 volt sheet complete all as specified and as directed.

S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 kA breaking capacity B" curved type complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and as directed. Make :- Havells / Legrand / GE / Seimens

S&F Submain wiring with two single core PVC insulated FRLS multistrand copper conductor cable of size 06 Sq mm drawn into and including non metallic heavy duty rigid concealed PVC conduit not less than 25 mm size ISI marked ivory colour with all fittings / accessories and 06 Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete. (Note :- Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)

S&FSheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Mettalic) complete with one single pole MCB for 240 volts 20 Amps rating rupturing capacity 10 KA complete fixed as in repairs complete all as specified and directed by Engineer-in-Charge Make Havells /L & T/ Legrand

M&L for point wiring with two single core PVC insulated & PVC unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm 1100 volts grade confirming to IS 694, drawn through in and including concealed PVC conduit of size 20 mm to 25mm with all accessories including making good the disturbed surfaces of wall with colour washing/ distempering the surface to match the existing and one single core PVC insulated & PVC sheathed multi stranded copper conductor of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly including suitable size of module metal flux boxes and including modular front cover ,colour plate & back plate for mounting modular type switch socket /fan regulator etc, complete as specified for One light/Fan point controlled by one 5 Amps 240 V switch one way complete.

All as per item No 57 above but One 3 pin 5 amps switch socket outlet point on independent board

All as per item No 57 above but One 3 pin 5 amps socket point on same board

All as per the item no 57 but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.

S&F switch modular type single pole, one way 5 complete all as specified and as directed. Amps.Make:Plaza/Havells/Anchor

S&F switch socket outlet 2 in 1, 5 pin, 5 Amps modular type complete all as specified and as directed. Make:Plaza/Havells/Anchor

S&F switch socket outlet 2 in 1, 5 pin, 15 Amps modular type complete all as specified and as directed. Make:Plaza/Havells/Anchor

S&F socket outlet 5 Amps modular type complete all as specified and as directed. Make:Plaza/Havells/Anchor

S&F stepped modular type electronic fan regulator flush type on the existing phenolic laminated sheet as required. Make:Plaza/Havells/Anchor

M&Lceiling rose,PVC/polycarbonate, isolated body Make:Plaza/Havells/Anchor

Supply and fix LED light fittings 1x18/20 watt ,220 volt AC decorative end cap type with driver holder including 20 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete .

Supply and fixing LED security light 45 watt or next capacity complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed.

Supply and fixing ceiling fan complete with blade down rod electronic regulator and accessories 230 v 1200 mm sweep complete five star rated with brush less direct current motor complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete all as specified and directed.

H R ENGINEERS