Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC RZ 140 A EAST SAGARPUR STREET NO 7 8 NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹10.0 L+₹18,207 (1.85%)Rejected-AOC | L2 | Rejected-AOC Not L1 Bidder | |
| 3 | L3₹10.5 L+₹68,402 (6.97%)Rejected-AOC | L3 | Rejected-AOC Not L1 Bidder | |
| 4 | L4₹10.7 L+₹90,802 (9.25%)Rejected-AOC FLAT NO 151 BLOCK NO 1 DIAMOND SQUARE CGHS LTD PLOT NO 13A SECTOR 6 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | L4 | Rejected-AOC Not L1 Bidder | |
| 5 | L5₹11.4 L+₹1.6 L (16.6%)Rejected-AOC A 303 VEENA CGHS LTD PLOT NO 5D SECTOR 22 DWARKA NEW DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L5 | Rejected-AOC Not L1 Bidder |
Tender Value
₹14.2 L
EMD Value
₹28,400
Closing Date
11 Aug 2020, 6:00 pmClosed
GE U WATER SUPPLY DELHI CANTT 10
GE U WATER SUPPLY DELHI CANTT 10
PETTY REPAIR FOR ATTENDING DAY TO DAY E M EXTERNAL WATER SUPPLY COMPLAINTS IN CHITRAL LINE OLD CHITRAL LINE BASANTRAL LINE BUTCHERY OLD BASE HOSPITAL MAP BEHIND BUTCHERY AFMSD AFTC NPG LINE HAZIPEER LINE SEKHAWATI LINE 629 TPT COY 262 T CAMP DIPAC AN
2020_MES_340834_2
GE/WS/D-09 OF 2020-21
Open Tender
Civil Works
Item Rate
330 days
GE U WATER SUPPLY DELHI CANTT 10
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE U WATER SUPPLY DELHI CANTT 10
₹28,400
Yes
3 Dec 2020
25 Jul 2020
13 Aug 2020
25 Jul 2020
11 Aug 2020
4 Aug 2020
Amount
Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply including noting the complaints in complaint register complete all as specified and as directed.
Notes for Srl No. 1 :- The rates quoted by the contractor shall also deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of experienced Electrician/Plumber as applicable assisted with adequate number of helpers, matriculation passed qualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from his dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to recieve and notify coplained. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made.
(iv) While attending the complaint of water supply/Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site.
Supply only GI Socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Nipple of different sizes as per requirement, both ends screwed, medium grade, ISI Marked complete all as specified and as directed of following sizes.
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes.
20 mmx15mm bore
25mmx20mm bore
50 mm x 40 mm bore
25 mmx 15mm bore
Supply only GI plug, solid, heavy duty, complete all as specified and as directed of following sizes
15 mm Bore
20 mm Bore
25 mm Bore
40 mm Bore
50 mm Bore
Supply only GI Tee, Medium Grade, complete all as specified and as directed of following sizes.
15 mm x 15 mm x 15 mm
20 mm x 20 mm x 15 mm
20 mm x 20 mm x 20 mm
25 mm x 25 mm x 25 mm
25 mm x 25 mm x 15 mm
40 mm x 40 mm x 40 mm
50 mm x 50 mm x 50 mm
50 mm x 50 mm x 25 mm
Supply only lead pig bar complete all as specified and as directed.
Supply only spun yarn complete all as specified and as directed.
Supply only 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.
Supply only 15 mm bore Bib tap chromium plated cast copper alloy with crutch / butterfly handle screwed down for 15 mm bore pipe complete all as specified and as directed.
Taking up or down GI steel tubing with connections of following sizes from trenches/walls complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely.
15 mm GI Tubing
20 mm GI Tubing
25 mm GI Tubing
40 mm GI Tubing
50 mm GI Tubing
Refixing/ relaying, jointing and testing old GI steel tubing retrieved under srl No 15 here-in-before in new or old position at walls,ceiling or Trenches etc with old or new fittings including cleaning throughly and removal of blockages if any complete all as specified and as directed. Note:- Excavation & earth work For new location shall be measured & paid separetely.
25 mm GI Tubing
40 mm GI Tubing
50 mm GI Tubing
Supplying and Laying GI pipe medium grade ISI Mark of following sizes with all fittings in old/new position in trenches/ floor and making good the disturbed surfaces as per exisitng including taking out unserviceable GI pipe, complete all as specified and directed - Note: Earth work shall be measured & paid sepreately under relevent schedule 'A' items
15 mm GI Tubing
20 mm GI Tubing
25 mm GI Tubing
40 mm GI Tubing
50 mm GI Tubing
Supply only PTMT float valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.
PTMT float valve, 15 mm bore
PTMT float valve, 20 mm bore
PTMT float valve, 25 mm bore
PTMT float valve, 40 mm bore
PTMT float valve, 50 mm bore
Supply Only Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes.
Gun metal gate valve, 15 mm bore
Gun metal gate valve, 20 mm bore
Gun metal gate valve, 25 mm bore
Gun metal gate valve, 40 mm bore
Gun metal gate valve, 50 mm bore
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level all as specified and as directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.
Material and labour for well burnt Sub class 'B' bricks for UG cable protection laid in across the cable above the sand cushioning complete all as directed abd specified. complete all as specified and as directed.
Supplying and laying for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.
Taking out/down suction pipe 80 mm to 200 mm bore from sump, of any capacity, dismantling of foot valve screwed / flanged type and re-lowering after refixing in position the same duly cleaned / minor repair, if any, required such as replacement of rubber gasket/ lifting bolts & nuts and making thread for the suction pipes off sizes etc complete all as specified and as directed.
Opening of existing sluice valve of sizes 80 to 100 mm including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note:- Spare parts shall be measured and paid separately under respective items.
Opening of existing sluice valve of sizes 150 to 300 mm including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note:- Spare parts shall be measured and paid separately under respective items.
Supply only 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed.
Stem, 80 mm bore
Stem, 100 mm bore
Stem, 150 mm bore
Stem, 200 mm bore
Supply only 'Stem Nut' made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed.
Stem Nut, 80 mm bore
Stem Nut, 100 mm bore
Stem Nut, 150 mm bore
Stem Nut, 200 mm bore
Testing of drinking water collected from local source (bore wells /shallow wells) in the area of AGE(U) W/S No.I and submission of detailed test report to the office of Engineer-in-Charge. (i) Carrying out minimum essential testing of water as per IS 10500-2012 mandatory for chemical colour, odour, taste, turbidity, PH value, TDS total hardness, iron, chloride, fluoride and residual free chlorine and Bacteriological total coliform organisms per 100 ml (MPN) and E Coli in 100 ml) with specific recommendation regarding suitability of water for drinking purposes. (ii) Collection of water from different sources of water ie. Sump, bore wells & shallow well in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification Note :- Rate Quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) To and fro transportation charges for collection of samples from source (sump, bore & shallow wells)
Supplying, fixing, jointing and testing cast iron foot valve 100 mm bore , flanged ends operation with rubber sheet, swing type, confirming to IS- 4038 complete including taking out unserviceable foot valve complete all as specified and as directed .
Supplying, fixing, jointing and testing cast iron foot valve 150 mm bore , flanged ends operation with rubber sheet, swing type, confirming to IS- 4038 complete including taking out unserviceable foot valve complete all as specified and as directed . Note For Item no. 29 & 30:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
Supplying, fixing, jointing and testing cast iron non return valve 100 mm bore without by pass arrangement , swing type, confirming to IS- 5312, flanged ends pressure rating PN-1.0 complete including taking out unserviceable NRV and depositing to MES store yard complete all as specified and as directed .
Supplying, fixing, jointing and testing cast iron non return valve 150 mm bore without by pass arrangement , swing type, confirming to IS- 5312, flanged ends pressure rating PN-1.0 complete including taking out unserviceable NRV and depositing to MES store yard complete all as specified and as directed .
Supplying, fixing, jointing & testing cast Iron Sluice Valve 100 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top Complete with Nut, Bols Washer and Rubber Gaskets including taking out unserviceable sluice valve and depositing to MES store yard complete all as specified and as directed .
Supplying, fixing, jointing & testing cast Iron Sluice Valve 150 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top Complete with Nut, Bols Washer and Rubber Gaskets including taking out unserviceable sluice valve and depositing to MES store yard complete all as specified and as directed .
M&L for laying and jointing CI Fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs Upto 200 mm bore conforming to IS: 1538-1993 complete all as specified and as directed.
Material and labour for painting synthetic enamel paint to pipe surface of any description over 10cm in width or girth,not otherwise described complete all as specified and directed.
M&L for fabrication (welding work ) of MS Header/ any size upto 300 mm MS pipe at various pump house site for arresting leakges on header complete all as specified and directed by Engineer-in-Charge.
Supply, installation and testing of water meter in replacement, of following sizes, Woltman type class-B, flanged ends, with Nuts, Bolts, washers and rubber gaskets fixing in horizontal/inclind/vertical position, including cutting of pipes complete all as specified and as directed at site by the Engineer-in-Charge. Note:- Flanged joints with jointing material shall deemed to be included in the quoted unit rates.
100 mm Bore
150 mm Bore
Supplying and fixing CPVC pipe ISI Mark with all fittings in old/new position in trenches/ floor and making good the disturbed surfaces as per exisitng including taking out unserviceable CPVC pipe, complete all as specified and directed by Engineer - in charge of the following sizes:- Note:- Excavation & earth work shall be measured & paid separetely.
20 mm Bore
50 mm Bore
Supply and fixing in replacement XLPE insulated, sheathed, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5 core complete all as specified and as directed.
Supply and fixing in replacement XLPE insulated, sheathed, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 70 sqmm, 3.5 core complete all as specified and as directed.
Supply and fixing in replacement heat shrinkable jointkit suitable for XLPE cable insulated screened PVC bedded armoured electric power cable, heavy duty, 1100 volts grade with stranded aluminium conductor , cross sectional area 35sqmm to 70 sqmm, 3.5 core after taking down/out faulty portion as exists complete all as specified and as directed.
Supply and fixing in replacement 3 pole power contactor type ML-1.5, 25 Amps, 415 Volts, 50 HZ complete all as specified and as directed.
Supply and fixing in replacement 3 pole power contactor type ML-2.0,32 Amps, 415 Volts, 50 HZ complete all as specified and as directed.
Supply and fixing in replacement 3 pole power contactor type ML-3.0, 415 Volts, 50 HZ complete all as specified and as directed.
Supply and fixing thermal overload relay of range 10-16 Amps, ML-1 including taking out old unservicable thermal over load relay all as per specified and as directed.
Supply and fixing thermal overload relay of range 13-21 Amps, ML-2/ML-3 including taking out old unservicable thermal over load relay all as per specified and as directed.
Testing the cables with high voltage DC testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault, disconnecting faulty 1100 volts LT cables of different sizes from both ends , removal of fault , Reconnection and testing of cables after removal of fault complete all as specified and directed by Engr-in-charge. NOTE:(a) 1100 volt cables and joints shall be measured and paid for seperately under respective items of schedule (b) Retrieved old serviceable cable cover/ bricks will be laid in trenches for cable protection. If extra PCC cover / bricks and sand required at site shall be measured and paid separately under respective items of BOQs. (c) Exacavation and earth work will be measured and paid for separately under respective items of schedule.
Supply and fixing Analog time switch 1 Module type including taking out old unservicable Analog time switch all as per specified and as directed.
Supply and fixing in replacement moulded case circuit breakers (MCCB), 3 Pole 415 Volt adjustable type 63 Amp with breaking capacity 25 KA.
Supply and fixing in replacement moulded case circuit breakers (MCCB), 3 Pole 415 Volt adjustable type 100 Amp with breaking capacity 25 KA.
Supply and fixing in replacement moulded case circuit breakers (MCCB), 3 Pole 415 Volt adjustable type 160 Amp with breaking capacity 25 KA.
S & F Fully automatic stat delta starter FASD ML-1.5 415V 50 Hz 3 phase including taking down old starter complete all as specified and as directed.
S & F Fully automatic stat delta starter FASD ML-2.0 415V 50 Hz 3 phase including taking down old starter complete all as specified and as directed.
S & F Fully automatic stat delta starter FASD ML-3.0 415 V 50 Hz 3 phase including taking down old starter complte complete all as specified and as directed.
Surface dressing of uneven surfaces of natural ground, rough excavated surfaces not exceeding 15 cm deep and filled area where ordered shall be trimmed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site complete all as specified and as directed.
An amount of Rs 49866.50 shall be deducted from BOQ on account of schedule of credit
triveni enterprises
Ashish Sehgal and Co.
BRIJ MOHAN LAL AND CO.
Ridhi engineers and builders
Microsys Controls India
V.K. Enterprises
DHAIRYAE ENTERPRISES
Pran and Bros
Sumit Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .