CERTAIN BR REPAIRS TO OTMMD ACCN OF UNIT A AND OFFRS MESS OF B C D AND F UNDER AGE BRI OF GE (WEST) FEROZEPUR CANTT

Amount

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and refixing in the same opening complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

All as per ser item No 5 here-in-before but size 125mmx60mm with double rebate.

All as per ser item No 5 here-in-before but size 75mmx50mm with double rebate.

S&F 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass gauze, etc (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.

S&F 35mm thick second class hard wood plain framed, panelled shutters (two panel), with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified and directed.

S&F powder coated anodised Aluminium door, window, ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding Aluminium frame of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated Aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions. Note: Glass Pane and EPDM Rubber beading/gasket will be measured and paid for seperately.

Supply only EPDM rubber beading around glass in Aluminium windows/ventilator shutters complete all as specified and directed.

S&F Aluminium decogrill 10mm thick with necessary channels and clips, DG, 104 of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised Aluminium standard section around the opening, all complete complete all as specified and directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed.

S&F 150mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 125mm extruded Aluminium alloy handle complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.

S&F butt hinges 100mm size exturded Aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed.

S&F 150 mm floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 4 lever Aluminium mortice lock, vertical type size 100 mm complete all as specified and directed.

S&F hydraulically regulated extruded Aluminium body door closer designation No 3 universal type suitable for door shutters of 851mm to 1000mm in width and weight between 61 Kg to 80 Kg etc complete all as speciified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick Aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed.

S&F 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts stone enamelled black with bright bolt complete all as specified and directed.

S&F factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F 3mm thick ordinary quality sheet glass and glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified and directed.

S&F 3mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/steel window not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L cutting holes in brick wall exceeding half bricks but not exceeding one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed.

M&L for forming jambs etc built in cement mortor 1:6 to openings including cutting toothing and properly bonding into to old work also facing, jointoing and pointing to match to existing work complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repair complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19mm x 19mm mild steel square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15mm x 15mm mild steel square tube inside 19mm x 19mm mild steel square tube suitably screwed complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes of size 15mm x 15mm for top and bottom rails and 19mm x 19mm for styles, mild steel frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming styles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, panelling of 5mm thick PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

S&F PTMT tower bolts, 200mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle, 125mm long fixed with steel screws complete all as specified and directed.

Demolition of boarding of any description and in any position complete all as specified and directed.

S&F 18mm thick solid PVC board plain colour, fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mm X 18mm X 500mm on three sides complete all as specified and directed.

S&F 20mm thick Solid PVC board plain colour, fixed with screws or adhesive with complete accessories as in shutters complete all as specified and directed.

S&F 150mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 125mm extruded Aluminium alloy handle complete all as specified and directed.

S&F hasp and staple of Aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.

Demolition of un-reinforced cement concrete in any position complete all as specified and directed.

M&L 15mm thick cement mortar 1:3 with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.

M&L applying evenly a tack coat of industrial bitumen of grade 85/25 at the rate of 1.2 kg per Sqm including cleaning surfaces complete all as specified and directed.

APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and directed.

M&L PCC 1:5:10, type E-2 (using 40 mm graded stone aggregate ) as in filling under sunken portion complete all as specified and directed.

M&L 30 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in floor finished even and rough to receive top layer complete all as specified and directed.

Supply only integral water proofing compound.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per ser item No. 58 here-in-before but using old bricks retrieved from demolition under ser item No. 57 here-in-before including cleaning and removal of mortar from old bricks.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on any face of brick wall or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

Dismantling of floor hearth and wall tiling including mortar bedding and throw rubbish out the premises complete all as specified and directed.

M&L non-skid ceramic coloured (colour & shade as approved) tiles of 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L non-skid ceramic coloured (colour & shade as approved) tiles of 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L non-skid ceramic coloured (colour & shade as approved) tiles of 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

S&F vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (light shade) cement to match over 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for light shade Vitrified tile 10mm thick polished, area of tile not exceeding 0.36 Sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L glazed coloured ceramic tiles of size 300mm X 200mm and 6mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L glazed coloured ceramic tiles of size 450mm X 350mm and 6mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and directed.

M&L Granite 18mm-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar 1:4 with pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L 16mm-18mm thick coloured marble slab of size not less than 1 Sqm each, machine cut as in cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar 1:4 and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified and directed.

M&L machine cut Kota stone slab flooring 20mm-25mm thick over 20 mm cement screed base cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed.

M&L Kota stone slab 20mm-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in cement mortar 1:4 and jointed as per ser item No. 75 here-in-before.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.

Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing complete all as specified and as directed.

All as per ser item No. 79 here-in-before but 20mm dia.

Demolition of boarding of any description and in any position complete all as specified and directed.

S&F 2nd class hard wood 25 mm thick boarding clean sawn with butt joints fixed with nails in any situation, fixed in shelves; partitions and shelves of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and smilar work complete all as specified and as directed.

S&F Aluminium tower bolt of extruded section, 100mm length of bolt and fixed with screws, complete all as specified and directed.

S&F 100mm size, extruded Aluminium alloy handles, fabricated type, anodised and fixed with screws complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L 75mm thick, PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 20mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L 60mm thick coloured interlocking (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE Complete all as speciifed and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 75mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base of floor complete all as specified and directed.

M&L hardcore of broken bricks of guage exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L plain cement concrete 1:2:4, type B -1 all around the interlocking tiles to fix in position as in kerbs Complete all as specified and directed.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe in repair complete all as specified and directed.

S&F 15mm dia bib tap standard of PTMT (Minimum weight 90gms) any colour high pressure screwed for iron pipe and fixed in repair complete all as specified and directed.

S&F bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule in repair complete all as specified and directed.

S&F 1000 litre capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed.

S&F 500 litre capacity rotational moulded tripe layere polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing water storage tank, complete all as specified and directed.

S&F 20mm dia ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc. as fixed in repairs complete all as specified and directed.

S&F gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed.

S&F 15mm dia ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc. as fixed in repairs complete all as specified and directed.

S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repair complete all as specified and directed.

S&F 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup in repair complete all as specified and directed.

S&F PVC connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F 32mm bore PVC waste pipe with waste fittings, for sinks, WHB etc with long screwed shanks and fly nuts complete all as specified and directed.

S&F 125mm dia PTMT grating fixed over trap with cement as in repair complete all as specified and directed.

S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 mm to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.

S&F vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed in repair, complete all as specified and directed.

S&F one piece vitreous china wash down water closet pan( pedestal pattern) white/coloured cascade type 640mmx360mmx690mm (monolithic flush cistern type) single piece wc with PP seat cover, hinges fixing all accessories set including flushing cistern with S-Trap of size 220mm in repair all as per manufacturing instructions and complete all as specified and directed.

S&F wall hung vanity type wash hand basin cabinet of size 805mm X 450mm with wash basin (white) in repair complete all as specified and directed.

S&F health faucet (ABS body) with 8mm dia 1.00m long flexible tube (PVC/Stainless steel coated) and wall hook in repair complete all as specfied and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F vitreous China bowl urinal flat back, size of 465mm X 355mm X 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.

S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38mm/40mm dia PVC waste pipe and including 38mm/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.

S&F chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe in repair complete all as specified and directed.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repair complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and directed.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F in repair to hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed.

S&F Gypsum board 6mm to 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (angle 25mmX25mm, Main tee 38mmX23mm, Sub tee 23mmX23mm) including Aluminium anodised/powder coated snap grid frame 605mmX605mm for false ceiling including hanging arrangement as in repair complete all as specified and directed. Note :- The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.

Removing mud phuska/soil material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed.

M&L for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen of grade 85/25 at the rate of 1.2 kg per Sqm including cleaning surfaces complete all as specified and directed.

M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface. Note : WPC shall be measured and paid for separately

M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed.

All as per ser item No. 138 here-in-before but except tiles. Note : Serviceable tiles retrieved from ser item No. 132 here-in-before shall be reused after cleaning.

M&L APP membrane to be finished with one coat of solar reflective bituminious based Aluminium paint @0.1 kg per Sqm complete all as specified and directed.

M&L covet fillet in plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) minimum radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including form work complete all as specified and directed.

S&F chromium plated fancy type wall mixer 2 in-1, connecting legs and wall flange in repair complete all as per manufacturer's instruction and as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvatume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron/mild steel work in any position complete all as specified and directed.

S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) Quality 'A' including fabrication, erraction and fixing complete all as specified and directed.

S&F rolled sections as in post/pilllars where connected with angle cleats or other connecting plates etc, of Fe 410-W (Gde E-250) Quality 'B' including fabrication, erection and fixing complete all as specified and directed.

M&L preparing new surfaces of wood and wood based surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new plastered surfaces wall and applying two coats of oil bound distember over a coat of primer complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on ceiling including cornices complete all as specified and directed.

M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L washing rubbing down and stopping of cement based painted surface and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and directed.

M&L preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on already prepared old steel surfaces complete all as specified and directed.

M&L preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on already prepared old steel surfaces complete all as specified and directed.

M/S KRISHNA ENTERPRISES (BID ID -3063427)

M/s AH Construction Co. (BID ID -3063033)

Kissan contractor and engg works (BID ID -3061637)

Easyways Enterprises (BID ID -3059518)