SPECIAL REPAIRS TO SMQs AT AFS YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM 1:4 complete all as directed and specified.

M&L Glazed coloued Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick screed bed in CM 1:4 finished all as specified and directed in toilets ang kitchen.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm as in flooring over 15mm thick screed bed in CM 1:4 all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite. all as specified and directed.

Rounding to edges of granite slab such as cooking platform all as specified and directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level).

M&L 75 mm thick cement concrete type B-2,1:2:4(40 mm graded aggregate) for plinth protection all as specified and as directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade ‘B’ all as specified and directed by Engr-in-charge.

Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

Demolition of brick work or stone masonry built in CM incl all quions all as specified

Demolition of cement concrete in ground floor and pavings RCC in any description and in any position.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering l is to be even & smooth without using extra cement on external wall all as specified and as directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bond distemper over a coat of interior wall care putty 3mm thick all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming with alkali resistant priming paint etc complete all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD over a coat of 3mm thick wall care putty all as specified and directed

M&L preparation of old wall surface and applying two coat of White wash all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD in ceiling all as specified and directed

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic enamel all as specified and directed.

M&L for one coat of exterior paint to old decorated surfaces of wall ,floor, interlocking & chequred tile or incl preparation of surfaces complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

All as per item No 28 here-in-before but 20mm bore

S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F in repair gun metal globe gate valve 20 mm bore.

S&F in repair gun metal globe gate valve 25 mm bore.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F plastic pedestal pattern seat cover black with flat bottom and cover and MS chormium plated hanging type device all as specified and directed.

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets all as specified and as directed

S & F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed completed all as specified.

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified.

S&F in repair 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Cera Model F3002152 or equivalent in Jaguar/ESS

S&F in repair 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. Make : Nirali/ diamond/Blue star

S&F in repair sink cock fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302 or equivalent in Jaguar/ESS

S&F Towel Rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H or equivalent).

Supply and fixed PVC Cabinet mirror all as specified .(make Prayag or equivalent).

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.

S & F in repaiers CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

Supply and Fixing of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&Fin repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.

S & F corner glass shelf with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S & F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F stainless steel Soap dish fix to wall all as directed and specified.

S&F Corner glass shelf large, 300x300mm all as specified and directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin all as specified.

S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr . ( Make :NIRALI,Blue star,Nilkhant)

S&F PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F PVC(SWR) Pipe s 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors

S & F PVC (SWR) bends 110 mm dia in any radius with access etc.

PVC (SWR) pipes 75 mm single socketedwith in any length with rubber ring joints, laid in trenches or in floors and walls.

S & F PVC (SWR) bends 75 mm dia in any radius with access etc.

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc.

S&F CP grating size 100mm fixed with white cement all as specified.

S&F in repair rotational moulded polyethylene water storage tank 1000 ltr capacity hoisted and fixed in position all as specified in SSR Pt - I including dismantling old tank.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) .

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms).

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No74 above but exceeding 1.5 sqm but not exceeding 4 sqm

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exc 2sqm each and refixing in the same opening all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified.

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON or equivalent)

S& F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. (Note; manufacture MAXON or equivalent)

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium handle 150mm cast type anodised.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

S&F Brass 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.

S&F in repair Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.

S&F Continuous(piano) hinges,brass ,bright finish of electrogalvanised 40 mm width of flap.

Cover fillets of standard 6 mm thick ness hard board, 40mm wide,and fixing with screws.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed by Engineer-in-Charge

All as item 98 above but figured glass pin head type.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed by Engineer-in-Charge

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of primer to steel surface all as specified and directed.

S& F for aluminium powder coated drapery rod 32mm dia shall have two fillets at both ends.

S& F aluminium powder coated fancy type suitablre brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends.

M&L for 20 mm thick Plastic kitchen cabinet with all accessories (Handle,Piano hinges,Magnet catcher telescopic channel etc Including 6mm thick plastic sheet back side of the kitchen cabinet of Make :Sintex or Equivalent)

S&F stainless steel Bucket 48 cm x 50 cm x 10 cm

S&F stainless steel Bucket 48 cm x 50 cm x 15 cm

S&F stainless steel Bucket 48 cm x 50 cm x 20cm

Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staicase complete all as specified and as directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 complete all as specified and as directed.

Taking down the unserviceable point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling roses, pendent regulators, sockets etc any light points and making good distrubed surfaces of walls and floors etc.

Taking down unserviceble DBs, with MCBs and Main switches.

Taking down ceiling fan, dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

Taking down Exhaust fan, dismantling blades and removing fan and refixing Exhaust fan after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

M & L for painting of Taking down ceiling and Exhaust fans complete, in site with synthetic enamel paint by spraying including filling caviteis with filler, one coat after cleaning all dust etc.

M&L for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC white conduit not less than 20mm dia and conduit accessories fixed to wall/floors/ceiling etc and provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor,1.5 sqmm for earth continuity conductor and connected to common earth dolly including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlests, fan regulators including fixing PVC round block 8 cm dia and 4 cm in depth etc., for the following: -

One light point controlled by one 5 Amps switch

One ceiling fan/Exhaust fan controlled by one 5 Amps switch

One socket 5 amp on independent board.

One socket 5 amp on Same Board with other switches.

One Bell Point controlled by one Bell Push

All as per item No 117 above but wiring with 2.5 sq mm FRLS copper cable including earth continuty conductor with 2.5 sq mm FRLS copper cable for one 6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch. Note for item No. 117: Cutting chases for routing conduit and making good as per the existing where ever necessary shall be measured and paid seperately.

Supply and fix switch piano 5 Amps flush type one way.

Supply and fix socket outlet 5 pin 5 Amps multi pin flush type

Supply and fix switch socket combination 5 pin 5 Amps multi pin flush type.

Supply and fix switch socket combination 5/15 Amps multi pin flush type.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete.

Supply and fix Modular Bell push 6A 1 module type, 230 volts, ISI marked complete.

Supply and fix Bell ding dong AC 230 V complete.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed.

Supply and fixing LED, Tube light fitting 20 W, 6500K trim neo LED polycarbonate batten with Decorative ultra slim linear LED lighting fixture with extruded polycarbonate surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor, flexible wire from ceiling rose to light fitting and two round block for mounting tubelight fittings including dismantling old unsv fitting all as specified and directed.

Supply and fixing LED, Tube light fitting 10 W, 6500K trim neo LED polycarbonate batten, with Decorative ultra slim linear LED lighting fixture with extruded polycarbonate body surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting and two round block for mounting tubelight fittings including dismantling old unsv fitting all as specified and directed.

Supply and fix 10W LED, 5700K, 230 V integrated LED Bulk head luminaire fitting of pressure die cast housing with Control driver with efficiency 90 %, Acrylic diffuser & frame with IP 65 protection,including dismantling old unsv fittings all as specified and directed by Engr-in-Charge.

Supply and fixing LED 14 Watts 230 V, with Control driver with efficiency 90 % ,attractive type sleek LED mirror light 2 feet fitting with high output diffuser prewired inluding all accessories and connecting up with twin core twisted copper conductor with suitable size and two round block for mounting tubelight fittings including dismantling old unsv fitting completed all as specified and directed.

Supply and fix 25 watts, 230 V LED fitting for Building security with pressure die cast aluminum housing, with Control driver with efficiency 90 %, with heat resistant glass and IP 65 protection with better optics for uniform distribution,including necessary fixing arrengment of clamps,nut,bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge.

M&L for sub-main wiring with two runs of 4 sqmm unsheathed PVC insulated, single core cable with copper stranded conductor drawn through and including suitable dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 4 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-charge. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length. Note:- Three run of 4 Sq mm and PVC conduct is measured as one Run or one Meter.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 12 way Double door with 200A rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed by Engr in charge.

Taking down and Supply and Fix MCB SPN 6 to 32A, B Curve, 10 KA rupturing capacity.

Taking down and Supply and Fix MCB SP 6 to 32A, B Curve 10 KA rupturing capacity.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as directed.

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc all as specified and directed by Engr-in-Charge.

NAVREET CONSTRUCTION

Raghu M Contractor

Lakkaiah Rangaswamy

M/s. ARK BUILDERS

M/s BHOOMI ELECTRICALS

chowdeshwariconstructionco

SRI GANESH ENTERPRISES