Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.5 LAccepted-AOC 1ST FLOOR PRABHA SHOPPING COMPLEX OLD PAHARGAON DOLLYGUNJ PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 UDYAM AN 01 0000143 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | 1 | Accepted-AOC L1 biddder | |
| 2 | 2₹12.2 L+₹1.3 L (11.8%)Rejected-Finance | 2 | Rejected-Finance Not L1 bidder | |
| 3 | 3₹12.4 L+₹1.5 L (13.5%)Rejected-Finance SHOP NO 6 BENGALI CLUB MIDDLE POINT SRI VIJAYA PURAM 744101 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | 3 | Rejected-Finance Not L1 bidder | |
| 4 | 4₹14.6 L+₹3.7 L (34.1%)Rejected-Finance D K CITY C 42 MINNIEBAY POST BOX NO 340 HPO PORT BLAIR 744 103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | 4 | Rejected-Finance Not L1 bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical All documents not are in order |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
9 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
REPAIR MAINTENANCE OF SOLAR WATER HEATER INCLUDING PANELS WATER TUBES FRAMES AND STRUCTURE ALONGWITH ELECTRIC METAL CLAD BOXES ETC IN DAKSHINESWAR 2 CBPO AND SALT LAKE UNDER GE N KOLKATA
2022_MES_562417_1
8181/22-23/E8/G(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
Dakshineswar 2 CBPO Salt Lake
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹20,000
Yes
11 Jan 2023
10 Nov 2022
10 Dec 2022
11 Nov 2022
9 Dec 2022
25 Nov 2022
Amount
Descaling of Solar flat plate Collectors connected to solar water heater of various capacity by using mild acidic solution (such as vinegar) or solution as recommended by manufacturer, cleaning entire surface and re-assembling the same including required soldering if required complete all as specified and directed.
Cleaning of Solar water heater tank of capacity 300/ 400 LPD by standard liquid/ solution or as recommended by manufacturer and drain out all scales, dust, dirt by pressure pipe cleaning & replacement of U/S drain plug alongwith required work such as threading, welding etc. complete all as specified and directed.
Supply and replace broken glass plate of Solar flat plate collector of any size/ dimension and fixing it properly at the top with the help of nut, bolts and Welding/ brazing/ soldering work complete as per requirement for the proper functioning of collector all as specified and directed by Engr-in-charge.
Supply and fix in repair of Solar flat plate collector complete with glass plate ,frame and connected items etc. heating capacity greater than or equal to 300/ 400 LPD resemblance with existing collectors and connected properly with other flat plate collectors with the help of nut, bolts and welding/ brazing/ soldering work if required complete all as specified and directed by Engr-in-charge.
Supply and fix in repair damaged/ broken copper tube of flat plate collector by welding/ brazing method as required complete all as specified and directed.
M&L for cladding of insulated rubber (rock wool/ mineral wool/ fibre glass wool) as per fixed on site including one layer of aluminium sheet/ flakes cover on outlet/ air vent of solar water heater GI pipe in a manner to minimise any type of heat losses complete all as specified and directed by engineer in charge.
Supply & fix in repair forged brass ball valve screwed of size 20mm dia complete all as specified and directed.
Supply & fix in repair gun metal gate valve of size 20mm dia complete all as specified and directed.
S&F in repair EPDM sheet including required nut, bolt and washer set at both end , used for jointing two flat plate collector/ at end of solar flat plate collector complete all as specified and directed.
Supply and fix in repair heating element 3000 watt alongwith thermostat of suitable shape and size fitted in Solar water heater tank, conforming to ISI with rubber washers, with clamps complete all as specified and directed by Engr-in-charge. (Make- as per existing.)
Supply and fix in repair stem type thermostat with switch/nob suitable for Solar water heater complete all as specified and directed by Engineer - in - Charge. (Make : Bajaj, Spherehot, Racold / other ISI make as approved by GE.)
Supply and fix in repair GI tubing, medium grade in short lengths with all fittings such as elbow, tee, socket, nipple, reducing socket, reducing elbow, reducing tee including guttees / saddles etc of size 20 mm bore and fixed to wall / floor / ceiling including connection to mixing arrangements of hot / cold water and making good disturbed surfaces complete all as specified and directed by Engineer - in – Charge.
Supply and fix in repair Plug and socket board with metal plug and socket (1 phase+neutral & earth) of 20 Amp rating DP complete all as specified and directed by Engineer - in – Charge. (Make- Polycab/ Havells/ C&S.)
Supply and fix in repair, MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.
M&L for MS Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and provn of two coats of synthetic enamel paint over a coat of red oxide primer including taking down old section complete all as specified and directed.
M&L for providing precast cement concrete type B1 (1:2:4) using 20mm graded aggregates set in cement mortar 1:6 of for stand of solar water heater all as specified and directed.
Supply and fix LED building security light fitting 35 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete including taking down old unserviceable light fittings complete all as specified and directed.
Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead strip protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Part I including taking down old unsv earthing complete all as specified as directed
Supply and fix in repair Advance conductive compound based chemical compound technology with upgraded high tensile low carbon steel rod as per UL 467 and as per BS 7430 with copper coating 250 microns, earthing system confirming to IS:3034. The ROD should 17.2 mm & 3 meter length with rod to tape clamp, CR 125 (type A) protection of the terminal. Chemical compound should be the highly conductive compound as per BSEN 50164-7 with 25 Kg each bag & resitivity should be 0.05 ohm meter. The job includes digging the pit and refilling the same by fursecem Back fill compound (Ground enhancer), the BFC should be eco friendly it should not contain environmentally hazardous material/metal having mixed with 3:1 cement, a conductive concrete is formed. The earth pit should provided with a light weight inspection pit cover PT-205 for protection and safe guard of terminals. In areas where soild condition is bad good earth is to be arranged to fill the excavated pits by mixing furseCEM- a convenient sand permanent solution by adding with 3:1 ration chemical compound with the earth electrode is the main component of the earthing system which is in direct contact with the ground and thus provides a mean of releasing or collecting earh leakage currents. The material should have good electrical conductivity and anti corrosion property in wide range of soil conditions. Make : ABB furseCEM /. Each earth pit should contains :- 1. 1 No copper bonded high tensile low carbon steel, 17.2 mm dia, 3 meter length. 2. Rod to tape clamp (type A) 3. 25 Kg chemical compund as per BSEN 50164-7 4. Light weight inspection pit cover with 5000 kg wight load capacity
Supply and fix LED flood light fitting 210 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and directed.
Supply and fix in repair LED flood light luminaries with panel including LED Lamp of 60 Watt complete including GI bracket of Medium grade pipe, bent to shape,32 mm bore,1.2 mts long fixed with clamps 25x4 mm MS flat of suitable size, nut bolts and washers complete with two coats of alluminium paint over one coat of red oxide primer complete all as specified and as directed
Supply and fix in repair of LED Solar street light fitting of 20 Watt including galvanized steel pole in built (5m to 6m above ground level),lithium ion battery, solar panel, charge controller with dusk down sensor with two coats of alluminium paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-charge.
Supply and laying 50 mm bore steel water tubing, galvanised 'medium grade’ GI pipe with all necessary fittings and fixed to walls and ceilings or laid in floors/surface/trench including taking down old unserviceable pipe complete all as specified and as directed.
Supply and laying 40 mm bore steel water tubing, galvanised 'medium grade’ GI pipe with all necessary fittings and fixed complete to walls and ceilings or laid in floors/surface/trench including taking down old unserviceable pipe complete all as specified and as directed .
Supply and laying 25 mm bore steel water tubing, galvanised 'medium grade’ GI pipe with all necessary fittings and fixed complete to walls and ceilings or laid in floors/surface/trench including taking down old unserviceable pipe complete all as specified and as directed.
Supply and fix gun-metal gate valves 50mm bore, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified & directed.
Supply and fix gun-metal gate valves 40mm bore, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified & directed.
Excavation in trenches not exc 1.5 m width or n exc 10 sqm on plan and n.exe 1.5 m in depth for taking out/laying of pipe,cable,foundation etc and getting out in soft/loose soil complete all as specified and as directed.
Returning and filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtrs and depositing where directed including spreading, leveling at a level not exceeding 1.5 mtr from the starting point complete all as specified and as directed
M&L for sand cushioning with clean dry sand in trenches including filling, spreading and punning down to desired thickness for cable protection complete all as specified and as directed. Note: Punned down thickness of only 18 cm shall be considered for payment.
Supplying, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded aluminium conductors 16.0 sqmm x 4 core,1100 Volt grade, laid in trenches/pole including taking down old unsv cable complete all as specified and as directed.
Supply & laying sub class 'B' bricks laid dry in trenches for cable protection laid with its longitudnal axis perpendicular to cable axis complete all as specified and as directed.
All as per item No. 33 above but laying only(serviceable bricks obtained shall be re-used).
Material and labour for PCC (1:2:4) type B-1 (using 20mm graded aggregate) for coping of poles upto 20cm above ground including necessary form work, and finishing the surfaces even and smooth without using extra cement including demolition of damaged PCC coping complete all as specified and as directed.
Supply and laying PVC pipe 40 mm dia in trenches/ pole for protection of cable with necessary fittings as required complete all as specified and directed.
Supply and fix PVC long Bend of size 40mm in trench for protection of cable with necessary fittings as required complete all as specified and directed.
Supply and fix LED Bollard light fittings with IP 65 protection including 9-12 Watt LED lamp alongwith B22 Cap or LED panel in built accessories and fixing in existing Bollard including taking out old unserviceable/broken post top light fittings complete all as specified and as directed.
Supply and fix in repair Hot pressed moulded SMC pole/wall box of inside dimension 280mm x 170mm x 130mm to be fixed to pole/wall with provision of Din-rail of size (25x5mm)-1 number for fixing of SP MCB including PVC box-1 number for fixing of 6 Amp switch & socket complete all as specified and as directed. (Make- Hensel/Sintex)
Cutting hard standing / road for laying of cable / protection pipe not exceeding 30cm wide and not exceeding 30cm deep and making good after laying pipe/cable etc with PCC 1:3:6 Type C2 matching with existing road complete all as specified and as directed
Drilling/ Boring of Road for laying of UG Cable/ Protection pipe of various sizes not exceeding 50 cm in depth using trenchless technology complete all as specified and as directed. NOTE: SCHEDULE OF CREDIT FOR SUBJECT WORK IS Rs. 42288.50
HARSH ENGINEERING
Bharat Udyog
M/S KHUSHICONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .