Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.5 LAccepted-AOC | ₹42.5 L | L1 | Accepted-AOC Accept |
| 2 | L2₹42.6 LRejected-AOC | ₹42.6 L | L2 | Rejected-AOC Accept |
| 3 | L3₹42.6 LRejected-AOC | ₹42.6 L | L3 | Rejected-AOC Accept |
Tender Value
₹42.6 L
EMD Value
₹4.3 L
Closing Date
6 Mar 2026, 5:00 pmClosed
Executive Officer
Npp Sherkot
Renovation of Antyeshti Isthal at Mohalla Fatehnagar
2026_DOLBU_1119458_3
720/15vitt/E-tender2026
Open Tender
Civil Works
90 days
Npp Sherkot
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,030
Executive Officer
₹4.3 L
Npp Sherkot
7 Apr 2026
24 Feb 2026
7 Mar 2026
24 Feb 2026
6 Mar 2026
24 Feb 2026
24 Feb 2026
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
PCC 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: (1:6 cement and coarse send mortar)
Earth work in filling upto distance 5.00 km lead with cartage/royalty including supply of all material ,labour and T&P etc.required for proper completion of work
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in 1:6 cement send mortar
12mm thich plaster with one part of cement and six part of apporved course sand including supply of all materials, labour and completion of work.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
WBM Grading 3 (22.4-53 mm Stone ballast) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
Construction of un-reinforcedc,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 (1:1.5:3), coarse and fine aggregate not xeceeding 25 mm as per drawing and Technical Specification Clause 1501
Supply and fixing of mild steel bars for RCC work and angle for channel including supply of all material,labour and T&P etc.required for proper completion of work.
Applying Oil Bond distempering/ snowcem with primer coatincluding supply of all material ,labour and T&P etc.required for proper completion of work
2.50cm thick Plain cement concrete floor in 1:2:4 with cement,coarse sand and 20mm gauge stone gritt including 8cm thick base with 1:4:8 cement,fine sand & brick ballast of 40 mm gauge including supply of all material ,labour and T&P etc.required for proper completion of work
Mild steel or iron workin heavy sizes such as built up gates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Painting on G.S sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution Applying a coat of mordant solution on GS sheet. L 13.541 With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms o
Supply & laying of 80mm thick I shaped Vibrator made Interlocking Cement concrete pavers block (cement grey and red colour) including joint filling with local sand including supply of all material ,labour and T&P etc.required for proper completion of work(RED COLOR)
Hand pump rebore india markar Iind
Providing and fixing front lipper urinal basin of white glazed i/c necessary fittings and labour.(17.4.1)without cistern
Providing & Fixing G.I Pipe complete with G.I Fitting and clamps, inculuding cutting and making good the wall etc. internal work-exposed on wall. 15mm dia (As per P.W.D Schedule Item No. 18.10.1)
Providing & Fixing C.P Brass Long body Bip cock of approved quality confirming to I.S Standerds and weighing not less than 690gms (As per P.W.D Schedule Item No. 18.50.1)
Providing and fixing C.P brass angle valve i/callcompletion of wrk.18.53.1
Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
Providing and fixing white vitreous china wash basin including making all connection but excluding the cost of fitting as per SOR Ch. No. 22 item No. 17.25.1
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete DSR 8.31
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. DSR item No. 11.41.A.1
Laying brick soling layer on prepared sub grade with brick on end edging according to lines, graded and cross section show on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolling the same with three wheeled road roller 80-100 kn as per Technical Spcification Clause 412.
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer DSR item no. 10.5.2
Add GST
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
technical_2081688.pdf
techsummary_2081688.pdf
BOQ Comparative Chart
xlsx
finsummary_2081688.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
03tender.pdf
Tender Documents • 1.79 MB
BOQ_2081688.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid