Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC 2 GA 29 HOUSING BOARD MANU MARG ALWAR 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.2 L+₹72,691 (3.93%)Rejected-Finance A 103 VEERA GARDEN AMBEDKAR NAGAR ALWAR 301001 RAJ | ALWAR | RAJASTHAN | 301001 | L2 | Rejected-Finance Being L2 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
10 Dec 2022, 6:00 pmClosed
GE Alwar
GE Alwar
REPAIR, CANNING AND POLISHING OF WOODEN FURNITURE AT ITARANA, ALWAR
2022_MES_558554_2
8105/E8
Open Tender
Civil Works
Item Rate
210 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹50,000
Yes
28 Jan 2023
25 Nov 2022
12 Dec 2022
25 Nov 2022
10 Dec 2022
28 Nov 2022
25 Nov 2022 - 27 Nov 2022
Amount
M&L for removing carefully following existing broken/ unserviceable components /members of Chair dinning and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-228 & FD-279 :-
Cane :- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg.
Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Font leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Front/ Back top rail as per existing size and shape as per Drg.
Left/Right top rail as per existing size and shape as per Drg.
Upper/ Lower Stiffner for back support as per existing size and shape duly furnished and polished.
Centre Stiffener 16mmx25mmx25mm as per existing size and shape as per Drg.
Side Stiffner - 14mmx25mmx25mm as per existing size and shape as per Drg.
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken /unserviceable components/ members of Chair Writing and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-202 & FD-280 :-
Cane :- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg.
Rear leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Front leg as per existing size and shape duly furnished and polished made out of 1st class hardwood (Teak)
Side Stiffener for bottom legs as per size and shape duly furnished and polished.
Centre Stiffener for bottom legs as per size and shape duly furnished and polished.
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Chair Easy and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-201 & FD-229 :-.
Cane (Seat and Back):- Cane shall be 2mm wide and 0.04mm thick, half round and 4 mm wide flat for border around seat as per existing size and shape as per Drg.
Front/Rear leg of size 55mm x 25mm x 535mm long made out of 1st class hardwood (Teak)
Left/Right arm rest of size 610mm x 55mm x 25mm made out of 1st class hardwood (Teak).
Front rail of size 520mm x 50mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
Rear rail of size 500mm x 70mm x 25mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
Side rail of size 530mm x 70mm x 40mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
Back frame of size 480mm x 55mm x 19mm made out of 1st class hardwood (Teak) including drilling of holes for canning as per drawings.
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Chair Easy Cushioned and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-358
Rear leg of size 70mm x 25mm x 490mm long made out of 1st class hardwood (Teak).
Front leg of size 70mm x 25mm x 545mm long made out of 1st class hardwood (Teak).
Left/Right arm rest of size 610mm x 65mm x 25mm made out of 1st class hardwood (Teak).
Front rail of size 510mm x 70mm x 25mm made out of 1st class hardwood (Teak).
Rear rail of size 480mm x 70mm x 25mm made out of 1st class hardwood (Teak).
Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak).
Seat shall be 50mm thick respectively synthetic foam of 28 density fixed over wooden frame and it shall be covered with leatherised rexine of approved shade and as per drawing.
Back shall be 50mm thick respectively synthetic foam of 28 density fixed over wooden frame and it shall be covered with leatherised rexine of approved shade and as per drawing.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Chair dinning cushioned and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD/E6/MAP/10 :-
Rear leg of size 30mm x 40mm x 900mm long made out of 1st class hardwood (Teak).
Front leg of size 30mm x 40mm x 325mm long made out of 1st class hardwood (Teak).
Front rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).
Rear rail of size 450mm x 65mm x 25mm made out of 1st class hardwood (Teak).
Side rail of size 545mm x 70mm x 25mm made out of 1st class hardwood (Teak).
Vertical strips 15mm x 30mm and 460mm long made out of 1st class hard wood (teak).
Seat shall be 75mm thick 32 density foam with fabric of approved sample on seat of 12mm thick phenol bonded plywood.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Bin linen multipurpose and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD/E6/MAP/09:-
Top of size 1200mm x 450mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Sides of size 675mm x 450mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade).
Shutter of size 675mm x 400mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) with handle mild steel chromium plated and magnetic catcher as per drg.
Shutter of size 540mm x 400mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade (exterior grade) with handle mild steel chromium plated and magnetic catcher as per drg.
Drawer of size 100mm x 400mm on stainless steel channel runner.
Stiffener made out of 1st class hard wood (teak) of size 25mm x 25mm x 1200mm.
Back of size 1200mm x 675mm made of plywood 12mm thick commercial both sides.
Bottom of size 1200mm x 450mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade).
Leg 1200mm x 450mm x 75mm made out of 1st class hardwood (Teak)
Shelf of size 750mm x 410mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).
Shelf of size 410mm x 364 made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).
M&L for removing carefully following existing unserviceable components/ members of Bed (with ply wood top and supply and fixing new components/ members complete all as shown on drawing and directed Drg No FD-246 :-
Head rest including legs as per existing size and shape duly furnished and polished.
Foot rest including legs as per existing size and shape duly furnished and polished.
Long rail as per existing size and shape duly furnished and polished.
Centre Stiffener to support ply wood bed top as per existing size and shape duly furnished and polished.
Cleat of Steel between rail and legs for tighting of bed.
Plywood Top 12mm thick BWR 1st grade as per existing size and shape.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Side board with drawer and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-241 :-
Top of size 1220mm x 445mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Sides of size 595mm x 455mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade).
Shutter of size 775mm x 585mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) duly furnish and polished.
Drawer of size 115mm x 385mm duly furnish & polished as per drg.
Drawer of size 180mm x 385mm duly furnish & polished as per drg.
Stiffener made out of 1st class hard wood (teak) of size 25mm x 45mm x 1220mm.
Back of size 1220mm x 635mm made of plywood 6mm thick commercial both sides.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing unserviceable components/ members of Sofa set and supply and fixing new components/ members complete all as shown on drawing and directed:- Drg No FD-281 & FD-373 :-
Front leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.
Rear leg made out of 1st class hardwood (Teak) of size 70mm x 35mm & height as shown on drawing.
Arm Made out of 1st class hardwood (Teak) of size 70mm x 35mm and length as shown on drawing.
Batten made out of 1st class hardwood (Teak) of size 20mm x 50mm & length as shown on drawing.
Back frame made out of 1st class hardwood (Teak) of size 70mm x 35mm & length as shown on drawing.
M&L for replacement of unserviceable seat/ back cushion with new 100mm thick with 40 density of size 560mm x 530mm x 100mm thick (Make - Sleepwell/Curlon) for sofa set all as specified and directed.
Removing carefully existing cover of seat/back cushion of size 560mm x 530mm x 100mm thick complete and material & labour for new cover of white long cloth not less than Rs 80/-per mtr and tapestry cloth of rate not less than Rs. 250/- per metre complete all as specified and directed.
PVC Ring/ Rubber shoe as per Drg.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Table 900mm x 600mm x 760mm with / without drawer and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-223 & FD-283
Side rail as per existing size made out of 1st class hardwood (Teak)
Leg of size 60mm x 60mm at top and 40mm x 40mm at bottom x 740mm long made out of 1st class hardwood (Teak).
Stiffener of size 40mm x 25mm x 760mm made out of 1st class hardwood (Teak).
Stiffener of size 40mm x 25mm x 460mm made out of 1st class hardwood (Teak).
Top of size 900mm x 600mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround.
Drawer of size 300mm x 460mm x 110mm with knob of Mild steel chromium plated of size 40mm.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Table Dinning 4 person 1200mm x 900mm and supply and fixing new components /members duly finished complete all as shown on drawing and directed Drg No FD/MAP-II/03 :-
Top of size 1200mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Leg of size 75mm dia at top and 40mm dia at bottom x 740mm long made out of 1st class hardwood (Teak).
Side rail of size 50mm x 25mm x 460mm made out of 1st class hardwood (Teak)
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
M&L for removing carefully following existing broken/ unserviceable components/ members of Table Dinning 6/8 persons 1500mm x 900mm x 760mm and 1800mm x 900mm x 760mm) and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-273/FD-376 :-
Side rail as per existing size made out of 1st class hardwood (Teak)
Front /Rear rail as per existing size made out of 1st class hardwood (Teak)
Leg of size 75mm x 40mm x 740mm long made out of 1st class hardwood (Teak).
Top of size 1500mm x 900mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Top of size 1800mm x 900mm made out of 18mm thick prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround.
PVC Shoes /Buffers.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table Dressing (Gents) and M&L for replacing new members duly finished of sizes as shown against each member, fixed in position all as specified, shown on drawings and directed Drg No FD-230 :-
Top of size 900mm x 300mm made out of 18mm thick prelaminated particle board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Drawer of size 125mm x 280mm with knob of Mild steel chromium plated of size 40mm.
Mirror of size 380mm x 760mm, 5 to 6mm thick.
Back of mirror made of plywood 6mm thick commercial both sides of 395mm x 775mm.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table Dressing Ladies and supply and fixing new components /members duly finished complete all as shown on drawing and directed Drg No FD-251 :-
Top of size 900mm x 380mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Drawer of size 140mm x 350mm with knob of Mild steel chromium plated of size 40mm.
Leg Made out of 1st class hardwood (Teak) of size 45mm x 45mm x 155mm.
Mirror of size 366mm x 1220mm, 5 to 6mm thick.
Sliding glass of size 300mm x 290mm, 5 to 6mm thick, including aluminum channel.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Peg Table (450mm x 300mm x 380mm) and supply and fixing new components/members duly finished complete all as shown on drawing and directed Drg No FD-236 :-
Leg Made out of 1st class hardwood (Teak) of size 45mm x 45mm at top cut to shape and 25mm x 25mm at bottom, 362mm height.
Front top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 300mm.
Side top rail made out of 1st class hardwood (Teak) of size 40mm x 19mm x 200mm.
Top of size 450mm x 300mm made out of 18mm thick decorative MDF board one side decorative of approved shade (exterior grade) including 4mm thick teakwood edging alround.
PVC Shoes /Buffers as per sample.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures/wooden members of Table bed side and supply and fixing new components /members duly finished complete all as shown on drawing and directed Drg No FD-248 :-
Side of size 435mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Shelf of size 380mm x 300mm made out of 18mm thick decorative MDF boarde of approved shade (exterior grade)
Bottom of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Back of size 380mm x 435mm made out of 6mm thick plywood one side decorative face and other side commercial face.
Top of size 380mm x 300mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table bed side (MAP) and supply and fixing new components /members duly finished complete all as shown on drawing and directed Drg No FD/E6/MAP/15 :-
Top of size 450mm x 450mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Left/Right Side of size 450mm x 432mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Bottom of size 450mm x 450mm made out of 18mm thick decorative MDF board of approved shade (exterior grade)
Back of size 500mm x 450mm made out of 6mm thick plywood and upper side/back decorative MDF board and 414mm x 90 mm, 18mm thick decorative MDF board of approved shade (exterior grade)
Drawer of size 414mm x 100mm made out of 18mm thick decorative MDF boardwith 6mm thick ply wood bottom and handle as per approved by Engr-in-charge.
PVC Shoes as per sample.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of Table writing (1145mm x 600mm x 760mm) and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD-275 :-
Leg Made out of 1st class hardwood (Teak) of size 55mm x 35mm of height as shown on drawing.
Front top rail made out of 1st class hardwood (Teak) of size 50mm x 25mm length as shown on drawing.
Top of size 1145mm x 600mm made out of 18mm thick decorative MDF board of approved shade (exterior grade) including 4mm thick teakwood edging alround.
Back made out of 6mm thick plywood commercial face both sides of size as shown on drawing.
PVC Shoes/buffers.
M&L for preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour.
Removing carefully the following existing broken / unserviceable fixtures / wooden members of TV Trolley and supply and fixing new components/ members duly finished complete all as shown on drawing and directed Drg No FD/E6/MAP/04 :-
Top :- 18mm thick prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging as per existing size and shape duly furnished and polished as per drg.
Glass:- 5.5mm thick openable glass shall be fitted with SS hinges and magnet catcher.
Castor 50mm dia as per drg.
M&L for prepration / cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling with putty with two coats of french polish match with existing colour for the followings :-
Stool dressing (FD-27(M), FD 252).
Bin solied linen large (FD-15(M), FD-212).
Hitesh Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .