Provn of Cross Link Fence, Washing Point cum Bathroom and rain water protection shed in the area of AGE B/R-II and E/M under GE (Central) Delhi Cantt-10

Amount

Demolition of brick work built in cement mortar in any description and position, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

Taking up or down 15 mm dia GI tubing and connections complete all as specified and directed.

Taking up or down 20 mm dia GI tubing and connections complete all as specified and directed

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified.

Dismantling of 75 mm dia cast iron pipe (soil/waste/vent) with fittings etc fixed to walls,ceiling, on floors & from trenches if required including taking out any type of joints complete all as specified.

Dismantling of 100 mm dia cast iron pipe (soil/waste/vent) with fittings etc fixed to walls,ceiling, on floors & from trenches if required including taking out any type of joints complete all as specified.

Surface dressing n exc 15 cm deep and site clearance complete all as specified and directed.

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soil complete all as specified and directed

M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed complete all as specified and directed.

M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling, mass concrete and Sub-Base complete all as specified and directed.

M & L for cement concrete 1:3:6 (20mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M & L 40 mm thick Damp proof course in B-0(1:2:4)(12.5mm graded agggregate) to horizontal or vertical surfaces including necessary formwork complete all as per specified and directed.

M & L Cement concrete type B-2 1:3:6 (40 mm graded stone aggregate) as in sub base, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed.

M & L for brickwork with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

All as per above items but except bricks

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto six storey height.

M&L for 15 mm thick in CM 1:4 on new surfaces of concrete or brick surfaces of walls or chajjas or pillars finished even and smooth without using extra cement including scaffolding and necessary formwork if required complete all as specified and directed.

M & L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying three coats of white lime wash on newly plastered wall surface complete all as specified and directed.

M & L for preparation of new plastered surface of wall and jallies and applying two coat of cement based paint over one coat of primer from the same manufacturer including scaffolding if required complete all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in flooring, complete all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 incl Dismantling floor, hearth or wall tiling including cement mortar bedding all as specified and directed .

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry laid over 15mm thick screed bed in cm 1:6 as in floors with no pigment complete all as specified and directed

S&F Machine pressed precast concrete rubber moulded interlocking coloured paver block of approved pattern shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 Grade over 50mm thick sand cushioning incl 50 mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in floors all as directed at site.

Supply and fix TMT bars of dia 10 mm, cut to length, bent to shape required, including cranking, bending and welding/fixing with column for strengthening chain link fencing complete all as specified and directed.

S&F high quality zinc coated GI Chain link fencing of required width in mesh size 50x50 mm made of GI wire dia not less than 3mm and fix with column with nut or bolts and strengtheing with 10mm TMT bars, conforing to standard grade steel complete all as specified and directed. NOTE:- (i) Payment of TMT bar shall be made in seperate items in this Schedule. (ii) The Engr-in-Charge along with rep of contractor shall verify the weight mesh and submit the copy along with photographic eveidence along with RAR and Purchase Voucher. (iii) The quoted rate shall be inclusive of Nut bolt required.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

S&F in MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe -290 Gde E-165 comple all as specified and directed.

M&L mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including necessary welding etc complete all as specified and directed.

M & L for painting new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 15mm dia GI tubing medium grade ISI marked with all fittings and fixed to wall and ceiling or laid in floors, complete all as specified and directed

S&F 20mm dia GI tubing medium grade ISI marked with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.

S&F brass chromium plated tubuler towel rail 20mm dia D type 60cm long between flanges including a pair of CP brass brackets, complete all as specified and directed.

S&F bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed.

S&F Fibre glass reinforced plastic (FRP) door frames of approved make with cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate door frame mouloded with fire retardant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in al the three lags. The frame shall be covered with fible glass from all sides. MS stay shall be provided at the bottom to steady the frame complete all as specified and directed.

S&F FRP Door shutter shall be 30mm thick glass Fibre Reinforced Plastic (FRP) Pannelled door shutter of required colour and approved brand and manufacturer. Made with fire retardant grade unsaturated polyster resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned woode inside at required places for fixing of fittins, cast monolithically with 5mm thick FRP panels and incl hinges, trowel bolt, handle etc confirming to IS 14856-2000 including fixing to frame complete all as specified and directed.

S&F chromium plated brass stop cock/angle valve fancy type screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified .

S & F wash hand basin vitreous china white glazed flat back, minimum size 550 x 400 mm, including brackets and cutting for and pinning in ends of brackets including 32 mm PVC waste pipe and fixing of its brass chromium plated fittings complete all as specified and directed.

Providing and fixing 100 mm nominal dia PTMT grating (Minimum weight 25gms) of approved quality and colour complete all as specified and directed.

Providing and fixing 125 mm nominal dia with 25 mm waste hole PTMT grating (Minimum weight 25gms) of approved quality and colour complete all as specified and directed.

S&F125 mm round/square CP brass shower rose 1of approved brand ISI marked suitable for 15mm bore pipe along with C P arms complete all as specified and directed.

Supply and fix PVC connection pipe of 15mm size with PTMT check nuts with washers of length 450mm, complete all as specified and directed.

S&F aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.

S & F 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F PVC mirror cabinet of size 500X400X120mm fancy type fixed with 4 Nos stain less steel clips and mirror thickness not less than 4 mm complete all as specified.

S&F 1000 ltr capacity ISI marked rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 20mm graded stone aggregate) for Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length, 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heator hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) complete all as specified and directed.

S&F DWCPE(SN4) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified and directed

S&F for 75mm rigid PVC (SWR) Type-B ISI marked conform to IS:13592 pipes single socketed,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion in any length laid in trenches or in floors of fix with Wall complete all as specified and directed.

S&F for 110 mm rigid PVC (SWR) Type-B ISI marked conform to IS:13592 pipes single socketed,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion in any length laid in trenches or in floors of fix with Wall complete all as specified and directed.

Providing and fixing PVC (SWR) (Type-B) moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion for theitem no. 56,57,58 & 59 complete all as specified and directed

Bends of 110 mm dia

bends of 75 mm dia

Single Tee with Door 110 mm

Single Tee with Door 75 mm

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including making good to floor complete all as specified and directed

S&F in repair 10 ltrs capacity PVC colour low level flushing cistern with PVC flush pipe 32mm dia complete all as specified and directed

Providing and fixing in repairs 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specifed and directed

S&F in repair chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specifed and directed

Supply & fix in repair PVC connection pipe of 15mm x 600mm long with 2 Nos brass check nuts with washers, complete all as specifed and directed

S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe complete all as specifed and directed.

Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete : complete all as specified and directed.

Providing and fixing aluminium tower bolts of size 200 mm long and 10 mm dia, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specifed and directed

Providing and fixing aluminium handles of 150 mm long, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specifed and directed

S&F Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm), pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified and direcetd

S&F in repair cast iron floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S&F in repair Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified.

M & L for Point wiring (concealed) complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through in and including non metallic medium grade rigid PVC conduit, ISI marked not less than 20 mm dia including all accessories concealed in wall by cutting chases and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty conductor including fabricated branded modular metal flush box duly make embossed, concealed in walls and with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified and as directed for (a) One light /Ceiling fan/exhaust fan point controlled by one, one way switch .

All as per item No.73 herein before but with 4 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. Note for Item 73 & 74 : (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing&caping/Existing conduit to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above. (iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC.

M&L switch Modular type 6 Amps 230V AC complete all as specified and directed by Engineer in charge.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engr in charge.

M&L switch Modular type 16 Amps 230V AC complete all as specified and directed by Engineer in charge.

S&F ceiling rose surface PVC 65x50 mm type with three terminals.

S & F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug top and socket complete with a MCB SP 20 Amp, "C" Curve 220 volts, 50 Hz, 10KA breaking capacity.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20-22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 105 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed .

S&F in replacement of LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed complete all as specified and directed .

S&F 35 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 80lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of sutable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.

S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltr having heating element 1.5 KW and not less than 5 star rating.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed.

Supply,laying in repairs of PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete all as specified and directed by EIC.

M&L for dry river sand filling in trenches as cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified and as directed by EIC.Note :- Punned thickness only shall be measured and paid.

Supplying laying sub class ‘B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

Schedule of Credit

imran construction company

LAMBA ENTERPRISES

SHREE RAM BUILD TECH

SHIVA ENTERPRISES

M/S ANIL KUMAR