GRASS CUTTING AROUND OPERATIONAL AREA AND ALLIED WORKS TO RUNWAY TAXI TRACK AND DISPERSAL ETC AT INS HANSA UNDER AGE BR I OF GE NW VASCO

Amount

Providing Labour and T&P for cutting of vegetation / grass shrubs using grass cutting machine including cutting of shrubs, bushes, small plants etc which not comes under category of trees by manually on runway, taxi track, dispersal and W/T pad sides upto GL & cutting of bushes including grubbing up small plants and removing the waste to a distance not exceeding 500 mtr outside the periphery of the airfield area / location etc., complete all as directed.

All as per item No. 1.00 above for the same location after a minimum gap of one month or more than one month or as and when required basis after first cutting all as directed.

All as per item No. 1.00 above for the same location after a minimum gap of one month or more than one month or as and when required basis after second cutting all as directed.

Removing leaves / grass / bushes / plastic bags or any other waste material from the freshly grass cut area of the airfield and removing to a distance exc 500 mtr but n.exc 7000 mtr outside the periphery of the airfield area / location etc., complete all as directed.

M&L for dry sand filling over SGA including spreading, leveling and ploughed to form furrows to an angle of 30 degrees proportionally to the existing ground. [Sand shall be coarse sand as approved of size (Single sized sand shall be 2.36mm may defined in terms of passing through sieve as 100% passing from 4.7mm sieve and 100% retained on 1.18 mm sieve) complete all as specified and as directed]. Note : (i) Mode of measurement shall be truck measurement/truck body (internal consolidated) measurements and depth will be measured after levelling the top surface of sand before unloading the sand. (ii) Coarse sand brought by contractor for laying at SGA area shall be sieved before execution of work @ 5 % of Qty of sand from truck load, randomly, from each and every truck to ascertain the requirement of specification of sand brought to site. (iii) The rate quoted for this item by the contractor shall deemed to be inclusive for these provisions.

Ploughing and furrowing SGA point by mannually all as directed (Furrows should be form of 30 degree angle) complete all as directed.

RNG CONSTRUCTION (BID ID -3493359)

CVS CONSTRUCTIONS (BID ID -3489222)

Paulraj Painters And Civil Engineering Contractors (BID ID -3490700)

Leela Enterprises (BID ID -3488292)

M/S DUBAL CONSTRUCTION (BID ID -3490617)

M/s J.D. DESAI (BID ID -3490450)

M/s VEEJEE ENTERPRISES (BID ID -3491417)

AATREYA CONSTRUCTION (BID ID -3493086)

Super Construction (BID ID -3489745)

SHIVRAJ CONSTRUCTIONS (BID ID -3492529)