CONSTRUCTION/REPAIRING OF BOUNDERY WALL. RECORD ROOM INMINOR IRRIGATION BORING GODAM COMPOUND IN DISTRICT BARABANKI

Amount

Construction of boundry wall at central store Minor irrigation Barabanki

Dismantling Brick work or stone work in lime or cement mortar including disposal of refuse as directed by Engineer in charge with in a distance of 60mt(200ft)

E/w in excavation in trenches for foundation & for pipes cables etc in ordinary soil (loam clay or sand) including fillinf lift upto 1.5m and lead upto 30m excaveted earth into the trenches or plinth and dressing of sides & ramming bottoms watering and ramming & disposal of surplus excavated earth as directed by engineer i/c SIno.251

Providing and laying of cement cocrete 1:6:12( 1 cement 6 fine sand 12 graded brick ballast 40mm) PWD Ch.10,S.No.273

R.C.C.Work in 1:2:4 with cement ,coarse sand and 20mm gauge stone grit i/c supply of material T&P complete work for plinth beam.As per SI No. 283

Mild steel (Ribbed Tor steel) or i/c in plain work such as re- inforced concrete or re-inforcement b/w when not i/c overall rates, wrought to required shape as necessary i/c bending for proper completion of the work and i/c of all(material not issued to store .SI no. 504 10mm to 12mm

M-150 Class brick work in 1:4 cement and corase sand of IN super structure including supply of all materials, labours and tools and plants etc. required for proper completion of the work. SI. No. 303+310 )

Painting of varnishing on iron work in three coat small areas or steel other matel surfaces with one coat of ready mixed priming paints and two coats of approved superior quality ready mixed paint of clear synthetic varnish i/c supply of all materials,labour and T&P etc.required for proper completion of work. paints to be used should confirm the ISI no 103-1950(SI No. 641+642)

Same as item no. 6 above but for every coat after 1st coat

Dismantling existing plaster including disposal of refuse as directed by Engineer in charge with in a distance of 60mt(200ft)

12 mm thick plaster in 1:3 cement, coarse sand mortar.As per SI No. 582

Finishing wall two coat with water proof cement paint of approved make on new work to give an even shade i/c supply, labour ,T&P (Sno. 660)

Barbed wire fencing over wall

Labour cost for fencing

Photography of site

Renovation of old building at Minor irrigation central store Barabanki

Dismantling existing plaster including disposal of refuse as directed by Engineer in charge with in a distance of 60mt(200ft) Pwd ch 17, Si 706

12 mm thick plaster with cement mortar in proportion of 1:3 consisting one part cement and three parts of approved Coarse sand 1.25F.M Pwd Sor Ch 13,Si 583

2cm th cement plaster in dado/skirting in 1:2 cement,coarse sand laid in pannel,finished with 3mm floating coat of neat cement including supply of all material, labour and T &P .Pwd Ch 13,Si 597

Add for extra labour to all items of plaster done in ceilling Pwd Ch 13,Si 587

Providing and laying 1:2:4 cement conrete with cement, approved coarse sand and 2cm graded approved stone complete Pwd Ch 5,Si 288

Providing and laying murga jali Pwd Ch 5,S.n.15

Painting and varnishing on new wood with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish i/c supply of all materials,labour and T&P required for proper completion of work Pwd Ch 16, SI 641

Distempering (two coat)with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give and even shade iover and i/c a priming coat witfh cement primer of approved brand and manufacture such as berger ,j& n,shalimar ,asian paints after thouroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even with plaser of paris or approved synthetic materials and sand paper smooth i/c cost of material in ceiling As per SI No 649+650

Scraping old white or colour wash including disposal of refuse material as directed by engineer in charge with a distance of 60 m.Pwd ch 17,Si 708

Construction of record room at minor irrigation central store Barabanki.

E/W excavation in foundation in O/S as perPwd ch 4,si 251

Cement concrete with 40mm gauge brick ballast sand of 1.25 F/sand cement 1:4:8 in foundation, under floor as PWD Ch.10,S.No.275

M-150 Sub class A bricks work in 1:6 cement,C/sand mortar in foundation and plingth as PWD Sor Ch.6,S.n303

RCC Work with cement,Coarse sand & 20mm stone grit in ratio 1:2:4 as PWD Sor Ch5,S.n.282 in plinth level

RCC Work with cement,Coarse sand & 20mm stone grit in ratio 1:2:4 as PWD Sor Ch5,S.n.282 in plinth level

Mild steel work in RCC Work as PWD Sor Ch.10S.n.504

M-150 Sub class A Brick work in 1:6 cement,Coarse sand mpotar in Super structure as PWD Sor Ch6,S.n.303+310

RCC Work with cement,Coarse sand & 20mm stone grit in ratio 1:2:4 as PWD Sor Ch5,S.n.282 in Lintal band

Sand filling in plinth including supply of necessary quantity of sand from distance not exceed 8km from site of work and watering ,dressing as PWD Sor 255

2.5Cm th. 1:2:4 cement, concrete floor with cement approved coarse sand ,20mm stone grit on planels finished with 3mm floating coat of neat cement PWD Ch14,si601a

Providing and fixing glass strip of 3mm th. And 25mm depth as S.N.631a

12 mm th. Plaster in 1:6 cement ,F/sand including all materials as per PWD Sor Ch.13,S.No586

12 mm th. Plaster in 1:6 cement ,F/sand including all materials as per PWD Sor Ch.13,S.No586

Fabrication & Supply of M.S. angle iron 40x40x5mm door,window chaukhat frame including cost of steel,all carraige welding,cuttinglabour grinding smooth finishing staple plate 6mm th.wilded in black flange at hinge cost of 14gauge hinge for 50mm size including all etc.S.N.7,Ch.10,NS1

S/F of commercial quality (Kanju) sitapur ply or other approved ply wood flush shutter 35 mm th.S.N.470

12mm th. Plaster work in 1:3 cement,fine finish with neat cement finishing on the top of roof as S.N.583A

Finishing wall with water proof cement paint of approved make and quality on new work with three coat to give an even shade including supply of all materials labour as S.N.660

Painting & varnishing new iron/wood work in small area with one coat of ready mixed paints and two coat approved super or quality ready mix paint etc. as S.N.641+642

20mm th. Skirting/dado in 1:3 with cement, coarse sand as S.N.625

S/F of mosquito proof jali having 5 mesh each cm. made of 24BWG wire heavy quality include 25x5mm flat iron around the jali ,welding as Sor Ch.10,S.n.8NS2

Supply of Indian type W.C.(580mm) at site Orissa pan

Supply of wash hand basin 550x400mm at site

Supply of S.W. gully trape 110x100mm at site

Supply of Mirro of atul make with Indian polish of 600x450mm dia size with bevelled edge.

Supply of PVC low level cistern,10 ltr capacity with all internal fitting of P.V.C.

Supply of M.S. bracket for flushing cistern

Supply of P.V.C. pipe 110mm

Fixing of 100mm size pan S- type for water closet squatting pans including jointing the trape with pan and pipe in cement mortar 1:1india type glazed earthen were Ist quality ISI marked W.C. pans.

Fixing 10 ltr finishing cistern with C.I./M.S. bracket complete with fitting etc. as CP sanitary S.N.5 india type glazed earthen were Ist quality ISI marked W.C. pans.

S/fixing of 100A/63A metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect as S.N.353(Electric work)

S/F of 16Amp. 415V metal clad TPN rewireable type switch fuse unit on angle iron bracket complete in all respect as S.N.311 Cat B (Electric work)

S/F Surface/Flash mounting 4ways SPN distribution board (legrand laxie) with MCB complete in all respect as S.N.1022 Cat B (Electric work)

S/F of 0.5Amp. to 5 Amp.SP MCB (10KA) complete in all respect as S.N.1001(Electric work)

S/Waring of submain with two number 16 sq mm FR PVC insulated 1100V grade multistrand single core copper comductior cable in 25mm dia heavy gauge rigid steel conduit on surface one no 10SWG copper earth continuity wire etc. complete in all respect as S.N.1022 Cat B (Electric work)

S/F of batten/angle holder complete in all respect as S.N.405 (Electric work)

Wiring point for fan/fresh air (light duty exhaust fan) with 1 sqmm FR PVC insulated multistrend single core copper conduction cable in heavy gauge rigid steel conduict pipe on surface complete with 14SWG copper earth continuity wire,pino type switch & ceiling rose on 3mm th. phenolie laminted backlite sheet etc. complete in all respect S.N.133 B ,Same as above but in PVC conduict with 1.50 sqmm fr pvc insulated multistrend copper cunduct cable as earth wire drawn in side the conduict S.N.133C(Electric work)

Wiring point for light with 1 sqmm FR PVC insulated multistrend single core copper conduction cable in heavy gauge rigid steel conduict pipe on surface complete with 14SWG copper earth continuity wire,pino type switch & ceiling rose on 3mm th. phenolie laminted backlite sheet etc. complete in all respect S.N.133 B ,Same as above but in PVC conduict with 1.50 sqmm fr pvc insulated multistrend copper cunduct cable as earth wire drawn in side the conduict S.N.134C(Electric work)

Wiring point for plug with 1 sqmm FR PVC insulated multistrend single core copper conduction cable in heavy gauge rigid steel conduict pipe on surface complete with 14SWG copper earth continuity wire,pino type switch & ceiling rose on 3mm th. phenolie laminted backlite sheet etc. complete in all respect S.N.133 B ,Same as above but in PVC conduict with 1.50 sqmm fr pvc insulated multistrend copper cunduct cable as earth wire drawn in side the conduict S.N.134C(Electric work)

Mislenous work for electirfication

M/S Sushila Devi