Reconfiguration of Existing Terminal building at Aurangabad Airport. SH Internal Electrical Wiring Works For the toilet proposed under renovation works

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Supplying and wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel conduit as required. 2 X 1.5 sq. mm +1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm +1 X 2.5 sq. mm earth wire

2 X 4 sq. mm +1 X 4 sq. mm earth wire

2 X 6 sq. mm +1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mm X 75mm)

12 Module (200mm X 150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (2+4), Double Door

8 way (2+6), Double Door

12 way (2+10), Double Door

Supplying and fixing of 8 way (8 +24), double door , metal, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing, blanking plates etc. as required. (But without MCB/RCCB/Isolator).(Make : L&T ; Model : 8537; 8 way (8 + 24) TPN DB Metal Door or Equivalent).

Supplying and fixing 63A rating, 415 V, 10 kA, Four Pole MCB suitable for inductive load in the existing TPN MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. 8 way (4 + 24), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double pole

Supply of recessed mounted LED downlighter 18W with pressure die-cast aluminium housing Lighting system comprising of LED of approved make ,having luminaire efficacy of not less than 100 lm/W. etc as per specifications and complete as required.

Installation, testing and commissioning of pre-wired, LED fitting with driver/ fluorescent fitting / compact fluorescent fitting /LED Batten /LED mirror light of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall/ surface, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply of following sizes of Power Cables , multi stranded copper conductor, XLPE Insulated, cores laid up, PVC tape / Extruded Inner sheathed , Armoured, FRLS at outer sheathed,1100V grade as per IS 7098 (Part 1) 1988 1). 4CORE 16 sq.mm. CU Ar. XLPE cable

Supply of 3.5CX 50 sq.mm size of XLPE insulated & PVC sheathed, armoured, aluminium conductor under ground cable of 1.1KV grade as per IS 7098:1988 Part-I with upto date amendments complete as required. (Make: As per AAI list of preffered makes)

Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 4C X 16 sq. mm

Supply of 230 v , 50 Hz industrial heavy duty exhaust fan having 230 mm sweep 2300 rev/minute indculing Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supply of LED mirror light 9W Lighting system comprising of LED of approved make ,having luminaire efficacy of not less than 100 lm/W. etc as per specifications and complete as required.

Supply of LED batten light 18W Lighting system comprising of LED of approved make ,having luminaire efficacy of not less than 100 lm/W. etc as per specifications and complete as required.

Supply of wall mounted SS steel Hand drier having suitable voltage range of 220-240 v. 50 Hz , Touch free infrared sensor activation, brushless motor having 18000 RPM, Noise level should not be more than 72 db. (Make : Dolphy ; DAHD0063 or Equivalent)

Supply of Aluminium roadster tower ladder (Heavy Duty) sides made of AL, ‘C’ sections (75 x 35 x 3.5 mm) and steps of AL (26 mm square), platform size : (12" x 8"). Corrugated tubing mounted on 02 nos. M.S. heavy duty wheels of size 3-4 ft. fitted with handle lock, pully, rope etc. Rubber shoe provided. Closed height : 20 ft ; Open height : 28 ft. (Equivalent to , Make : Sumer model No: 333/8801) , detailed specifications as per tender document.

Supply of Aluminium tiltable tower ladder (Heavy Duty) sides made out of AL 'C' section (75 x 35 x 3.5 mm) and steps of AL (26 mm square) corrugated. Corrugated tubing with chequered platform, platform size (24" x 24" ) tool tray on the top fitted with wire rope and heavy duty winch machine and mounted on M.S. trolley with two fix and two revolving wheels including additional gear boax for the tilting. The ladder whould be compatible to enter to the door size (2 meter x 2 meter) (h x w). Closed height : 20 ft ; Open height : 28 ft. (Equivalent to , Make : Sumer model No: 111/8806) , detailed specifications as per tender document.

Awasthi Electric Works (BID ID -759397)

GK ELECTRICALS AND ENGINEERS (BID ID -753314)

BANESHWAR ELECTRICAL AND ELECTRONICS A. S. SANSTHA , AURANGABAD (BID ID -759298)

Manish Electricals (BID ID -759359)