REPAIR AND MAINTENANCE OF FENCING AT 305 FD HOSPITAL, 40 MTN BDE AREA AND NURANANG UNDER GE TAWANG

Amount

Dismantling of posts struts (wood, steel or RCC) any section including taking out embedded portion in concrete or brick work or masonry etc and making good diturbed ground complete all as specifed and as directed .

Dismantling of fencing wire mesh/barbed wire, any type.

Excavation in post holes (or similar holes) in hard/dense soil , each post hole not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specifed and as directed

Materials & labour for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggrgate) as in foundations, filling and mass concrete complete all as specified and as directed.

Materials & labour for Mild steel work of angle iron or flat iron etc for railings, balusters, nosing to steps including embedding in concrete and screwing etc, for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work, steel conforming to Fe- 290 Gde E-165, complete all as specified and directed.

Materials & labour for Mild steel work as in bands, straps, clamp, wall ties etc, steel conforming to Fe 290 Gde F-165 complete all as specified and as directed.

Materials & labour for Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally hooping , hooking ends and binding with for fencing work complete all as specified and directed.

Supply only Chain Link MS galvanized fencing any size and any type complete all as specified and as directed

Fixing only Chain Link MS galvanized fencing including wires any mesh, size and any type of standards rails, straining bolts etc including provision of binding wires complete all as specified and as directed.

Supplyn& fixing Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc, complete all as specified and directed. (Note :- Each line wire to be measured)

Supplyn& fixing Mild steel screw bolt 11 to 15 mm dia neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square not exc 5 cm long complete all as specified and as directed.

Materials & labour for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of Brickwork or concrete block/stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Materials & labour for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

Materials & labour for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

Materials & labour for formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

Materials & labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified.

Materials & labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Materials & labour for TMT bars 5 mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Materials & labour for Mild steel rolled work as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coving, running rails and guides) and hanging; also fastening and fixing complete, steel conforming to grade Fe 410 -W (GdeE- 250) quality A complete all as specified and directed.

M/S GLOBAL ROYAL CONSTRUCTION

M/ S N T ENTERPRISES

M/S TARAYANA BUILDERS

M/S G M BUILDERS

M/S T D Enterprises

M/S L G BUILDERS

M/S TAWANG FRONTIER ASSOCIATES