Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹46.7 L+₹51,900 (1.12%)Rejected-Finance KAJANIBARI DINJAN PO DINJAN DIST TINSUKIA ASSAM786189 | DINJAN | TINSUKIA | ASSAM | 786189 | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹48.4 L+₹2.2 L (4.87%)Rejected-Finance GUIJAN GAON WARD NO 3 C O RAJKHOWA HOUSE P O RANGAGORA DIST TINSUKIA ASSAM PIN 786147 | TINSUKIA | ASSAM | 786147 | L3 | Rejected-Finance NOT BEING L1 | |
| 4 | L4₹48.6 L+₹2.5 L (5.35%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L4 | Rejected-Finance NOT BEING L1 | |
| 5 | L5₹48.9 L+₹2.8 L (5.99%)Rejected-Finance GANDHI PARK ROAD TINSUKIA ASSAM PIN 786125 | TINSUKIA | ASSAM | 786125 | L5 | Rejected-Finance NOT BEING L1 |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
21 Jan 2025, 6:00 pmClosed
GE DINJAN
GE DINJAN, PANITOLA (PO), DIBRUGARH (DIST), ASSAM PIN-786183
SMART PERIODICAL SERVICES OF ZONE III AND IV UNDER AGE BR II, REPAIR MAINT OF INTERNAL WIRING LIGHT FITTINGS DBs MCBs WKS IN OTM ACCN OF MISC UNIT AND REPAIR MAINT OF STREET LIGHTS, JUNCTION BOXES, CABLE POST TOP LANTERN AND CONNECTED ITEMS AT DINJAN
2025_MES_691502_1
C/8777/E8
Open Tender
Civil Works - Others
Item Rate
270 days
DINJAN MIL STN
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE DINJAN
₹97,000
Yes
4 Feb 2025
2 Jan 2025
28 Jan 2025
2 Jan 2025
21 Jan 2025
16 Jan 2025
Amount
Taking down cement plaster or cement lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris as directed including necessary scaffoldings etc complete all as directed.
M&L for rendering 5mm thick in cement morter (1:3) on ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 20 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10mm thick each layer) in cement mortar in (1:4) using water proofing compound in top layer and finished even and smooth without using extra lime or cement complete all as specified and directed. Note: Water Proofing Compound will be measured and paid separately.
Supply only liquid Water Proofing Compound of approved make.
M&L for applying three coats of white wash on new ceiling surfaces including preparation of surface, complete all as specified and directed.
M&L for complete removal of existing treatment from walls and applying two or more coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm /litre and UV resistant as per IS 15489:2004 alkali and fungal resistant exterior paint of required shed(company depot tinted) with silicon additives1.43 lits/10 sqm over and including primer coat of exterior primer applied 0.90 litre/10 sqm over a coat of 1mm thick putty over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L for preparation of plastered surface of external walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparing of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLHS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point terminated in and including 1.6mm thick mild steel sunken terminal box of suitable size with 3mm thick hylam sheet top cover fixed with suitable size of brass screws suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed.
All as per Item No.11 here in above but for One 2/3 pin socket outlet 5/6Amps on independent board.
All as per Item No.11 here in above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.
All as per Item No.11 here in above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm.
M&L for concealed point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and one single core FRLSH PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead, drawing through in and including PVC rigid conduit of size not less than 20mm, with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers, including cutting chases and making good by using cement mortar 1:4 complete for one light / fan point / call bell all as specified and directed. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item No.15 here in above but for One 2/3 pin socket outlet 5/6Amps on independent board.
All as per Item No.15 here in above but for One 2/3 pin socket outlet 5/6 Amps on the same board with other switches.
All as per Item No.15 here in above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm.
S&F Switch piano, flush type, single pole, one way switch 5 Amps ISI marked complete all as specified and as directed.
S&F Bell Push Flush type 5 Amp, 240 volt ISI marked complete all as specified and as directed.
S&F socket outlet, 2 in 1, 3 pin, 5 Amps, 240V bearing ISI marked complete all as specified and as directed.
S&F Switch socket combination 2 in 1, 5 Amps flush type, ISI marked complete all as specified and as directed.
S&F switch socket out let combination multipurpose 3/5 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.
S&F Bell Ding-Dong AC 230 V Single Pole ISI marked complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt ISI marked complete all as specified and as directed.
S&F angular/batten holder PVC/Polycarbonate suitable for batten fittings including one LED Lamp of 9W of complete all as specified and directed.
S&F Ceiling rose surface PVC, 3 terminals 65x50mm ISI marked complete all as specified and as directed.
S&F Recess mounted LED fitting of 10watts pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver , 125lm/w included cutting-opening of celing any type & fixing arrangement for fitting including taking down complete all as specified and as directed. Make: Havells, CAT NO- 10W LED, Ordering Code:EDGEPRONEORDDLR10WLED865S or equivalent model in make of Philips/Bajaj/CG.
S&F 12 W surface mounted downlight with white power coated aluminium housing and pressure die cast heat sink having high efficiency elegantly designed sleek surface mounted including taking down complete all as specified and directed. Make:- Havells/Philips/Bajaj/CG.
S&F LED fitting 1x18 watts, 220volts AC decorative box type with driver and of aluminium housing, holder LED tube light conncting up to 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED light fitting mirror type with high ouput diffuser 2 feet, 10 watts 220 volts AC decorative type with aliminium housing with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable of suitable size complete all as specified and directed.
S&F 15 W,125lm/watt surface mounted downlight 1x1 feet with white powder coated aluminium housing and pressure die cast heat sink having high efficiency Aesthetically designed 1x1 feet LED Flat panel for surface mounting including taking down complete all as specified and directed. Make :- Havells Cat No PLUTOSURFACE1X1PLUS15W LED840SG2 or equivalent model in make of Philips/ Bajaj/crompton.
S&F New PVC ractangular block for mounting MCB DB's with 3 mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep including taking down complete all as specified and directed.
S&F New PVC ractangular block for mounting MCB DB's with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep including taking down complete all as specified and directed.
S&F New PVC ractangular block for mounting MCB DB's with 3 mm thick plastic laminated sheet cover of size 100 x 100 x 50 mm deep including taking down complete all as specified and directed.
S&F 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. including all fixing arrangement and taking down old light fittings of any type complete all as specified and as directed.
Taking down old sub main wiring of any description and in any position complete all as directed.
M&L for sub main wiring with two run of 2.5 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing caping of suitable size, fixed to wall/ceiling etc including one run of 2.5 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing caping of suitable size, fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing caping of suitable size, fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
M&L for sub main wiring with 4 run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing caping of suitable size, fixed to wall/ceiling etc including 2 run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
M&L for sub main wiring with 4 run of 10Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing caping of suitable size, fixed to wall/ceiling etc including 2 run of 6Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
Taking down old unserviceable Switch piano and Supply and fix new Switch piano, flush type single pole, one way 5 Amp, 230 V complete all as specified and as directed.
Taking down old unserviceable Socket outlet and S&F new Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and as directed.
Taking down old unserviceable SSC any type and S & F new Switch socket combination 2 in 1, 5 Amp flush type, 240 V complete all as specified and as directed.
Taking down old unserviceable SSC any type and S & F new Switch socket combination 5A/ 16A, 5 in 1flush type, 240 V complete all as specified and as directed.
Taking down old unserviceable Bell push any type and S & F new Bell push, flush type, 5 amp,230 V complete all as specified and as directed.
Taking down old unserviceable Bell any type and S & F new Bell , AC, 230 Volts, single pole complete all as specified and as directed.
Taking down old unserviceable Ceiling rose and S & F new Ceiling rose, 3 way PVC insulated body complete all as specified and as directed..
Taking down old unserviceable fan regulator any type and S&F new stepped type electronics fan regulator flush type (Socket Type) complete all as specified and as directed.
Taking down old unserviceable modular switch and S & F new Modular Switch 1 way 6 A, 1 module complete all as specified and as directed.
Taking down old unserviceable modular switch and S & F new Modular Switch 1 way 16 A, 1 module complete all as specified and as directed.
Taking down old unserviceable modular socket and S & F new Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and as directed.
Taking down old unserviceable modular socket and S & F new Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and as directed.
Taking down old unserviceable modular regulator and S & F new Modular Regulator Step Type 120 watt, 2 module complete all as specified and as directed.
Taking down old unserviceable Decorative city light any type and S & F LED wall bracket light aesthetically designed with B22d & E27 lamp holder made up of aluminium housing suitable for 10 W including suitable LED Bulb complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size complete all as specified and as directed. Make:- Havells/Philips/Bajaj/Crompton.
Taking down old unsv and S&F Recess mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting-opening of celing any type & fixing arrangement for fitting complete all as specified and as directed. Make: Havells, Type: 10W LED, Ordering Code:INTEGRAGRANDDLR10WLED865S or equivalent model in make of Philips/Bajaj/Crompton.
Taking down old unserviceable and S&F surface and wall mounted LED batten 18watts with, aluminium housing and ingrated including, IP65, 125lm/w, energy efficient solution and electronic driver including taking down complete all as specified and as directed. Make : Havells/Philips/Bajaj/CG/Crompton.
Taking down old unserviceable and S&F Lumiline smart batten 20W aestheticaly designed LED batten, aluminium housing with micro motion technology, IP65, 125lm/w, energy efficient solution and electronic driver including taking down complete all as specified and as directed. Make:- Cat No-LUMILINESMART20WLED865PCWH of Havells or equivalent model in make of Philips/Bajaj/ Crompton.
Taking down old unserviceable and S&F 10 W surface and wall mounted LED Batten with aluminium housing, PC diffuser IP 65 and intigrated complete all as specified and as directed. Make : Havells/Philips/Bajaj/Crompton.
Taking down old tube light and S & F 25 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 including all fixing arrangemengt complete all as specified and as directed. Make : Havells Cat No-NDURASUNDOWNSL25WLED765 PASYBOPCIHD or equivalent model in make of Philips/ Bajaj/Crompton.
Taking down old tube light and S & F 45 W endura sunbeam sensor based LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having top opening seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 including all fixing arrangemengt complete all as specified and as directed. Make : Havells Cat No-ENDURASUNDOWNSL45WLED 757SASYTOPCESENSO or equivalent model in make of Philips/Bajaj/Crompton.
Taking down old unsv and S&F 12 W surface mounted downlight with white powder coated aluminium housing and pressure die cast heat sink having high efficiency elegantly designed sleek surface mounted complete all as specified and directed. Make:- Havells Cat No EDGESURFACERDDLR12W LED840S or equivalent model in make of Philips/Bajaj/ Crompton.
Taking down old unsv and S&F Venus Neo he smart LED 2x2 luminaire 36watts with integrated PIR sensor, soft light and glare free symmetrical illumination suitable for grid ceiling complete all as specified and as directed. Make: Havells Cat No- VENUSNEOHE2X2R36W LED840PIRSENSOR or equivalent model in make of Philips/Bajaj/Crompton.
Taking down old unsv and S&F Recess 15 watt mounted deep drawn PLUTO 1X1 feet CRCA housing with higher power LED Seamless front frame with flat white hight transmission acrylic cover all as specified and directed. Make : Havells Cat No- PLUTO1x1PLR15WLED840S or equivalent model in make of Philips/Bajaj/Crompton.
Taking down old unserviceable MCB distribution board and S&F sheet metal enclouser TPN DB having facility to fix MCCB in incomer and MCBs in outgoing, TPN 4 ways, IP 43 with metal door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. Make : Cat No 607913 of Legrand or equivalent model in make of ABB/Siemens.
Taking down old unserviceable MCB and M&L for MCCB of 4 pole type, 160 Amps current capacity, thermal magnetic type, 36 KA breaking capacity, 415 Volts complete all as specified and directed. Make : Havells cat No-IHA13EB40160 or equivalent model in make of ABB/Siemens.
Supply and fixing single pole and neutral enclosure with a two pin and earth Plug and socket complete with one single pole MCB of 20 Amps rating complete all as specified and directed.
Taking down old unserviceable lamp holder any type and S&F new Lamp holder , PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.
Taking down old unserviceable PVC hylum sheet any type and S&F new PVC hylum sheet 3mm thik top cover of size 250 x 200 x 3 mm complete all as specified and directed.
Taking down old unserviceable PVC hylum sheet any type and S&F new PVC hylum sheet 3mm thik top cover of size 175 x 100 x 3 mm complete all as specified and directed.
Taking down old unserviceable PVC hylum sheet any type and S&F new PVC hylum sheet 3mm thik top cover of size 100 x 100 x 3 mm complete all as specified and directed.
Taking down old unserviceable MCB DB any type and S&F new Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way, 415 V with common bus bar at incomming end complete all as specified and directed.
Taking down old unserviceable MCB DB any type and S&F new Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way, 240 V with common bus bar at incomming end complete all as specified and directed.
Taking down old unserviceable MCB DB any type and S&F new Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way, 240 V with common bus bar at incomming end complete all as specified and directed.
Taking down old unserviceable MCB DB any type and S&F new Sheet metal enclosure for MCB DB single door single pole & Neutral 2 way, 240 V with common bus bar at incomming end complete all as specified and directed.
Taking down old unserviceable MCB and S&F new MCB Four pole, 415 volts, 63 Amps, breaking capacity 10 KA complete all as specified and directed.
Taking down old unserviceable MCB and S&F new MCB 'C' series single pole and eutral 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.
Taking down old unserviceable MCB and S&F new MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.
Taking down old unserviceable MCB any type and S&F new MCB 'C' curve single pole 40-63 Amps with breaking capacity 10 KA complete all as specified and directed.
Taking down old unserviceable PVC casing and caping or conduit any type and S&F new PVC casing caping of size 20-25 mm complete all as specified and directed.
Taking down old unserviceable PVC casing and caping or conduit any type and S&F new PVC casing caping of size 25-32 mm complete all as specified and directed.
Taking down old unserviceable street light and S&F integral compact wide beam high performance 60w Led flood light luminaires with toughened glass and high power LEDs and secondary lences with IP65 protection system efficiency 110/120LPW 10KV SPD including connecting up with 2.5 sqmm multi stranded copper conductor cables of suitable length with fixed to pole/wall etc and testing complete all as specified and directed. Make : Havells/Jaquar/Philips/Crompton/Century.
Taking down old unserviceable street light and S&F new LED street light fitting of capacity 90W, street lights are aerodynamically designed for all weather conditions with excellent thermal management made up of pressure die cast housing with toughened glass and high power LEDs with secodary optics and IP 66 protection 10KV SPD including efficiency 110/120LPW including with necessary brackets/pipes/clamps,nuts & bolts for holding the street light fitting and three core copper cable of 2.5 sqmm as required in existing location complete all as specified and as directed.
Taking down old unserviceable wire of any size and S&F PVC insulated three core 1.5sqmm multi stranded copper coductor for connection including PVC conduit of security light from junction box to security light all complete all as specified and as directed.
Taking down old unserviceable post top light of any size and S&F LED post top gate light 40watts cap RUBY post ideal to light up parks, gardens and heritage site with rated voltage including high voltage and short circuit protection IP 65, with necessary suitable fixing accessaries/ arrangement complete all as specified and directed. Make:- Bajaj/Havells/Crompton.
Taking down old unserviceable Led bollard light of any size and S&F Cone LED Bollard 8W capacity garden light with rated voltage 240V including high voltage and short circuit protection IP 65 with necessary suitable fixing accessaries/ arrangment complete all as specified and directed. Make :- Bajaj/Havells/Crompton.
Taking down old unserviceable Led flood light of any size and S&F integral compact wide beam high performance 200W Led flood light luminaires with toughened glass and high power LEDs and secondary lences with IP65 protection system efficiency 110/120LPW 10KV SPD including connecting up with 2.5 sqmm multi stranded copper conductor cables of suitable length with fixed to pole/wall etc and testing complete all as specified and directed.
Taking down old unserviceable junction box of any size and S&F modular junction box made of SMC/FRP of size 240x130x110mm with provision of MCB SP, and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel/ flat iron clamps, nuts and bolts complete all as specified and as directed. Make : Cat No. GSJB 2413 of Sintex or equivalent model as approved.
M/S CHANDAN ENTERPRISE (BID ID -3220175)
M/S. UDDUG CONSTRUCTION (BID ID -3218730)
STANDARD ELECTRIC WINDERS (BID ID -3219884)
Bimal Trading Company (BID ID -3219859)
M/s Kanchan Enterprise (BID ID -3219234)
R D Enterprises (BID ID -3220235)
M H KHAN (BID ID -3219855)
CHETIA CONSTRUCTION (BID ID -3220229)
FREEZCON (BID ID -3219979)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .