R/M of GWSS to Chamba Town

Amount

Providing and fixing water water holding membrane or Jacketing liner for wall and Bottom Laminated high-density Polyethylene (HDPE) Fabrics for lining Woven Fabric with BIS standard IS 15351:2015 Type II 500 Micron, (Typical Value) 415 gram per square meter, Nominal Thickness ASTM DI 777 (0.6mm), Hydrostatic Resistance ASTMD 751 525 Ib per square meter, Hydraulic Conductivity ASTM E96 (B) 1.0-14 cm/s strip Tensile strength ASTM D7003 MD 265 (IBg), Trapezoidal Tear ASTM D4533 63 (Ibf) Low Temperature Brittleness ASTM D 2136 Pass at the rate - 60 degree F) Grab Tensile Strength(MD)ASTM D751 385 lbf including drilling suitable holes in reinforced of plain cement concrete with power driven drill machine to a minimum depth of 100 mm up to 200 mm in RCC beams, Lintels, Columns and slabs to introduce steel bars for sunshades balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement including the cost of bolts etc.The bolts are manufactured using rust-proof passivity steel and are yellow zinc plated to give additional.Our bolt kit includes a nut and 3 malleable iron expansion segments connected together by a ring.These anti-vibration nature bolts ensure safe working and can screw fasten conc. and rock including, erecting, maintaining, and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer in Charge 26 36 1 Woven PVC cloth as per direction of the Engineer in Charge complete in all respect including all leads and lifts and carriage of material to the site of work.

Providing and laying fixing wall protection layer Non Woven Geotexile 300 gsm Thickness ASTM B 5199 21mm MASS ASTM D 5261300 GM M2, Wide width tensile Elongation ASTM 4595 50-50 percent, Grab Tensile Strength md ASTM D 4632620 N.Trapezoidal Tear strength ASTM D4533 MD 300 N, Mullen Burst ASTM D3786 250 PSLCBR Puncture Strength ASTMD6241 1900N,Floor rate (5cm Head)ASTM 4491-125 LS M2,UV Resistance ASTM G154 at the rate 500Hrs greater than 50 percent as per direction of Engineer in Charge complete in all respect including all leads and lifts and carriage of material to the site of work.

Ajay Kumar

TECHPRO ENGINEERING COMPANY