Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-Finance | L1 | Accepted-Finance Lowest and reasonable bid | |
| 2 | L2₹29.5 L+₹1.8 L (6.59%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹30.4 L+₹2.7 L (9.91%)Rejected-Finance 15 GURU RAM DASS COLONY MITHAPUR JALANDHAR | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹30.8 L+₹3.2 L (11.4%)Rejected-Finance BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹31.4 L+₹3.7 L (13.3%)Rejected-Finance | L5 | Rejected-Finance Other than the lowest bid |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST JALANDHAR CANTT
Kabir Road Jalandhar Cantt.
WELCOME MAINT (B/R AND E/M) IN OFFRS MD ACCN AND CERTAIN REPAIR TO OTM AND MD ACCN OF A-1 AREA OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT.
2024_MES_666379_1
GE/JAL(W)-36/2024-25
Open Tender
Civil Works
Item Rate
270 days
JALANDHAR CANTT
Class D Category a(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
GE WEST JALANDHAR CANTT
₹66,000
Yes
27 Sept 2024
18 Jul 2024
17 Sept 2024
18 Jul 2024
12 Sept 2024
31 Jul 2024
Amount
Dismantling of brick tiles single layer as in roof covering complete all as specified
Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) and cleaning the roof surfaces thoroughly with wirw brushes all as specified.
M & L brushing neat cement slurry with 3kg of cement per sqm complete all as specified
M & L PCC Padding with cement concrete type B-0 (1:2:4) 12.50 mm graded aggregate to bring top surface of slab in slope complete all as specified.
M & L for 10 mm thick rendering on concrete surfaces finished even and smooth without using extra cemet in cement mortar 1:3 as in roof/sunken floors and using WPC 3% by wt of cement. Note : WPC shall be measured and paid separately under respective item.
M&L applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces
S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
M & L 40 mm th. Brick tiles laid on bedding layer of CM 1;6 15mm thick and joints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight of cement over APP membrane
M & L 40 mm th. Brick tiles laid on bedding layer of CM 1;6 15mm thick and joints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight of cement over APP membrane except brick all as specified and directed.
M & L flush pointing in CM 1:3 to brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by the Engineer-in-Charge.
M&L for non skid ceramic, coloured, tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:6) complete all as specified and as directed
M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skriting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:6 complete all as specified.
S&F coloured glazed ceramic white tiles 450 x 300 x 7mm thick as ion vertical surfaces viz dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including rendering 10mm thick cement mortar (1:4) complete all as specified and as directed
M&L for light shade vitrified ceramic, light shade tiles 7 to 8 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15 thick cement mortar (1:6) complete all as specified and as directed.
M&L for light shade vitrified ceramic, light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm; as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles as in skriting over and including rendering 10 thick cement mortar (1:4) complete all as specified and as directed.
Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed by EIC.
Taking down Chowkat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by EIC.
Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each.
S&F steel window 1.25mm thick box type ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW, sec 50mmx20mm and 1mm thick with two operable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 (four Nos for each window) including following fittings welded to frame/shutter:- (a) Hold fast,150mm long of 12mmx3mm made to shape-04 Nos per window (b) Handle of Z section 20mmx25mm 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf. (d) Z Section 20mmx25mm,100mm long stopper- 01 No per leaf (f) MS pintle hinges of size 75mmx12mm-2 Nos per leaf. (g) Fabrication and fixing arrangement as per Drg No.CEJZ/TD-06/07. Note:- Wire mesh shall be measured and paid separately under appropriate item.
All as per Item No. 22 here-in-before but glazed shutter. Note:- Glass shall be measured and paid separately under appropriate item
S&F powder coated aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F Powder coated aluminium door shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, butt hinges, anodised aluminium snap beading screws etc complete all as specified.
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F floor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 150mm complete all as specified and dierected.
S&F sheet glass 4.8 mm thick ordinary quality to be fixed in Al frame work in square exc 0.5 sqm in each pane
S&F solid PVC door frame of size 50x47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling and cutting holes for holdfast into the jambs etc., complete all as specified and directed.
S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock/ Bonsum/ Champlas) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.
S&F 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock / Bonsum / Champlas) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.23 (a).
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and ISI marked complete all as specified.
S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.
S&F aluminum cast type anodized handles 150mm long. complete all as specified.
S&F 100 mm size butt hinges galvanized mild steel, medium weight, cold rolled complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden surfaces including punching or drilling out old glazing pins/spring clips exceeding 1.5 Sq.m and providing and fixing new pins/clips complete all as specified.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads/aluminium beadsetc in square not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.
S&F in replacement aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.
S&F in replacement 15 mm bore chromium plated long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed complete all as specified.
S&F in repair 15 mm bore stop valve (or angle valve) fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.
Taking down cement or cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified
M&L 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified
M&L 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified
M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified
M&L for three coats of colour wash on newly plastered surfaces of ceilings including preparation of ceiling surfaces complete all as specified and directed by Engr -in-charge.
M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer over a coat of birla wallcare putty complete all as specified and directed by Engr -in-charge.
M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed by Engr -in-charge.
M&L for complete removal of existing treatment on walls and applying 1mm thick wall care putty and applying two coats of oil bound distemper complete all as specified and as directed by EIC
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as spd including dismounting and mounting of door shutter. (Make: Everest/Universal/Godrej)
Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).
M&L RCC 1:2:4 type B0 (using 12.50mm graded stone agg) as in Chajjas or canopies including necessary form work complete all as specified and directed
M&L mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less that 0.9mm dia or securing with clips including embedding the bars in wall and cutting chases all as directed.
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles incl removing mortor and cleaning serveciable bricks
M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks
Dismantling of AC corrugated/semi corrugated) sheets as in roof covering all as specified and directed by Engineer-in-Charge.
Material & Labour for 6 mm thick AC sheet corrugated or semi corrugated sheets in roofs fixed with `L' hook or `J' bolt all as specified and directed.
Taking up or down 15 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 15 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified.
Taking up or down 20 mm bore steel tubing and connection including cleaning serviceable steel tubing and fittings for refixing and removing unserviceable from site including cutting chases in wall/floor and making good the surfaces complete all as specified.
S&F 20 mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall (including cutting chases), ceiling or laid in floors complete all as specified.
S&F in replacement PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.
S&F in replacement 15mm bore brass chromium plated mixer with long spout or mixing hot and cold water for wash basin screwed down for 15 dia iron pipe including braded hose for hot water 15 mm dia complete all as specified and directed.
S&F in replacement 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for dia iron pipe complete all as specified and directed.
S&F in replacement 32 mm bore waste coupling of PTMT (half or full threaded) with minimum weight 45 gms complete all as specified and as directed.
S&F in replacement chromium plated grating 125mm dia circular, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed.
S&F in repairs vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including connection to trap and flushing pipe, anti-syphonage pipe etc and making good to floor etc complete all as specified and as directed.
S&F in repair vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.
S&F in replacement; sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed by EIC.
Supply, hoist and fix in repairs position; 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified .
Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified.
M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of interior emulsion paint as per manufacurers instructions and directed by Engr -in-charge.
M&L for prepration of old decorated surfaces of AC Roof sheets incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of exterior emulsion paint as per manufacurers instructions and directed by Engr -in-charge.
M&L for prepration of old surfaces of ceiling and applying one coat of white(lime) wash on ceiling complete all as specified and directed by Engr -in-charge.
M&L for preparing of old surfaces of walls and applying one coat of birla white putty and finished smooth complete all as specified and directed by Engr -in-charge.
M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.
Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F in repairsHealth faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexile tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make: Cera/Shakti/Prayag.
Demolition and breaking 100/75 mm dia drain pipe (AC Pipe) set in cement mortar
S & F 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.
S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.
S&F 110mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.
S&F 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified.
S&F continuous (Piano) hinges, mild steel bright finish or electro galvanized (width of flap when open 30mm) ISI marked complete all as specified and as directed.
M&L for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified .
S&F 40mm dia cup board knobs fixed with nut , screw and washer of brass polished
Supply and fixing at site super heavy hollow PVC wall panelling consisting of 5mm thick colour PVC sheet including PVC accessory of U+L and solvent cement and fixing on wall as per specification including dismantling old/unsv wall panelling.
Taking down and refixing shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.
Taking down and refixing shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.
Securing or easing and adjustment without taking down the shutter of any description exc 1 sqm and n exc 2 sqm each complete all as spd and directed
Material and labour for 25mm stainless steel pipe curtain rod, fixed with & including Stainless steel bright hooks/ brackets and stainlesss steel bright finish finials (at both side), complete all as specified includng fixing of long size rawl plugs in wall for SS hook including dismantling the old curtain rods (any type) complete all as specified and directed.
M&L for prepration of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engr -in-charge.
Demolition of cement concrete (Unreinformed) in ground floors and paving n exc 15 cm thickness (below or above ground level)
M&L for cement concrete type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring.
M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .
M&L for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.
M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) to receive the top layer of tiles
Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls and floors .
Taking down sub main wiring of two single core PVC cable PVC insulated 4 / 6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed by Engineer-in-Charge.
Taking down main switch / DB as directed by Engineer-In-Charge.
M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified. (a) One light / fan / call bell point controlled by one, one way switch.
b) All as per Ser item No -114 above but for 5 amps socket on independent board
c) All as per Ser item No- 114 above but for 5 amps socket on same board
All as per ser item No- 114 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.
Supply and fix in repair Modular switch 6 Amps single pole one way as per existing make & model/ as per sample .
Supply and fix in repair Modular switch 16 Amps single pole one way as per existing make & model/ as per sample . .
Supply and fix in repair Modular bell bush 5 Amps as per existing make & model/ as per sample .
Supply and fix Modular multi socket 3 pin and 2 pin 6 Amps round and flat as per existing make & model/ as per sample .
Supply and fix in repair Modular socket 6A /16 A Twin socket heavy duty as per existing make & model/ as per sample .
Supply & fixing switch piano flush type single pole one way 5 Amps all as specified.
Supply & fixing switch piano flush type single pole 15 Amps.
Supply & fixing socket outlet 5 Amp flush button type all as specified.
All as per item 125 here-in-before but 6 pin 5/15 Amps multi type.
Supply & fixing ceiling roses surfaces bakelite two three terminals 65 x 50 mm all as specified.
Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings including LED lamp 12W all as specified.
Supply & fixing bell electric (dingdong) 230 volt, SP
Supply and fix in repair modular fan regulator step type 240 V, 120 W , 2 modules all as as per existing make & model/ as per sample .
Supply and fix ceiling fan regulator Electronic rotary Step type single phase A/C 230 volts all complete as specified and directed.
Supply & Fixing MCB DP 240 volts 40 Amps to 63 amps in the existing DBs.
Supply & Fixing MCB single pole , 240 volts, 6 to 32 Amps in the existing DBs.
Supply and fix MCCB 100 Amps 4 pole 415 Volt,25 KA breaking capacity .
Supply & fixing MCB DB SPN with 200 amps rated Bus Bar suitable for MCBs 8 way all as specified and directed by Engr-in-Charge.
S & F distribution board TPN, double door, 04 way 240 Volts with sheet metal enclosure 200 Amps busbar suitable for isolator
S/F MCB TPN 63 Amps415 volts complete all as specified and directed.
Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply & fixing in replacement LED Bldg security light fitting 35 Watt including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50 mm 3 core including GI pipe 32mm light grade 0.9 Mtr long bent to L shape in 02 Nos of GI Clamps of size 25x6 mm of length 25mm with nuts, bolts and washers complete complete all as specified and directed.
S&F LED mirror light 10Watt 2 feet complete all as specified and directed.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in replacement LED tube light fitting 20W Box type including LED lamp 22 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.
S & F LED bulb 12 Watt complete all as specified
M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.
M&L for submain wiring with two RUNS of single core 6 sqmm for main wire and one run of single core 6 sqmm as earth wire of stranded copper conductor PVC insulated unsheathed cables drawn through and including concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked not less than 20 mm dia and all accessories complete all as specified & directed.
Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed.
S&F in replacement PVC casing and casing with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including putting in existing copper/aluminium cables complete all as specified and directed
Supply & fix bakelite Hylem sheet 3mm thick of size 10"x12" superior quality, including cutting of sheet to fix switch socket & regulator, including unscrewing the existing switch, socket, regulator and fixing the same on new sheet with new machine screw complete all as specified and directed.
All as per item no 148.00 but size 8"x10" complete all as specified and directed.
All as per item no 148.00 but size 8"x5" complete all as specified and directed.
SARASWATI CONSTRUCTION CO (BID ID -3084266)
M/S Kuldip Construction Co. (BID ID -3094290)
B.P CONSTRUCTION CO (BID ID -3086247)
M/S RAJESH CONSTRUCTION COMPANY (BID ID -3086070)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .