WELCOME MAINTENANCE TO OMQ AND CERTAIN B/R REPAIR / REPLACEMENT WORKS AT AIR FORCE STATION UDHAMPUR

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1:6 complete all as specified and directed by Engr-in-Charge..

M&L brick work with sub class B bricks straight or curved on plan to any radious in half brick thick built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge..

M&L for rendering 15mm thick CM 1:4 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge..

M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of Newly plastered surfaces of wall and applying 3mm thick Wall care putty (to be applied in two coats) over a coat of chalk whitening, on plastered surfaces prepartory to distempering complete all as specified and directed by Engr-in-Charge.

M&L for new surface of wall of any description and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for two coats of white wash on new plaster surfaces on walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface of wall of any description and applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface of ceiling of any description and applying one coat of white wash complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified and directed by Engr-in-Charge.

S&F 25mm thick flush shutter solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick flush shutter solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick 2nd class hard wood Plain framed shutter (One/two panel) with lock rail and panel of 9mm BWP ccommerial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick 2nd class hard wood Glazed and Skelton Shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engr-in-Charge.

S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified and directed by Engr-in-Charge.

M &L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying 02 coats of synthetic enemel paint over one coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

S&F 150mm long Extruded aluminium alloy Handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.

S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repair 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repair 200mm long (ISI Marked) Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 100mm long Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F in repairs 100 mm long Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

S&F in repairs galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

S&F 75 mm long Butt Hinges Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long Aluminium anodised, barrel Tower Bolts (ISI Marked) of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repairs 75 mm long Butt Hinges (ISI Marked) Medium Weight, Cold Rolled Mild steel and fixed complete all as specified and directed by Engr-in-Charge.

S & F in repairs 100 mm long Aluminium anodised, barrel Tower Bolts (ISI Marked) of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced)(alongwith floor tiles) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and as directed.

M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in Plinth protection complete all as specified and directed by Engr-in-Charge.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge..

M&L for ceramic glazed colour tiles as in vertical surfaces such as skirting ,dados etc 350 x 250x 7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10 mm thick rendering in CM 1:4complete all as specified and directed by Engr-in-Charge.

M&L for non-skid coloured ceramic tiles(Square/Rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed 15mm thk in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Virified Ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed 15mm thk in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc,area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed.

M&L for Factory made Steel Window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm including grill using 10 Sqm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to frame shutter complete all as specified and as directed:- (a) Hold Fast, 150mm long of Flat Iron 12mm x 3mm made to shape 04 Nos per window . (b) Handle of Z-Section 20mm x 25mm, 100mm Long 01 No per Leaf . (c) MS Tower bolt 150mm long - 02No per leaf . (d) Z-section 20mm x 25mm, 100mm Long Stopper 1 No per Leaf . (e) Cleat 55mm Long of Hollow Square 15mm x 20mm x 63mm welded to Hinge 01 No per Leaf . (f) MS Pintal hinges of size 75mm x 12mm 02 Nos per Leaf including Stainless Steel Wire Cloth, 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 02mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete and including taking down the existing old windows.

S & F in repair Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified .

S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest including making necessary connections to soil pipes and flushing cistern complete all as specified and as directed.

S & F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white colour (excluding fixing bolt, flushing cistern and flush pipe) size 580 x 440mm with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair seat and cover for pedestal pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device, complete all as specified and directed by Engr-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3, complete all as specified and directed by Engr-in-Charge.

M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, float and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and directed by Engr-in-Charge.

S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs single lever sink mixer(wall mounted) with 200 mm(8') long swivel spout connecting legs and wall flanges complete all as specified and directed by Engr-in-Charge.

S&F in repair, Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated wall mixer with long bend pipe for overhead shower with built-in non return valve complete for mixing hot & cold water screwed down for the iron pipe 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed by Engr-in-Charge.

S&F in repair CP Soap Dish fixed in wall with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair CP Grating doom 100mm dia complete all as specified and directed by Engr-in-Charge.

M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and directed by Engr-in-Charge.

Supply only Low density polyethylene (LDPE) pipes 32 mm of pressure rating 6 kgf/sq. cm complete all as specified and directed by Engr-in-Charge.

Supply only Low density polyethylene (LDPE) pipes 40 mm of pressure rating 6 kgf/sq. cm

S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed by Engr-in-Charge.

S&F in repair CP Toilet paper holder complete all as specified and directed by Engr-in-Charge.

S&F in repairs One piece WC including twin flushing cistern and soft closing seat cover and all connected items complete all as specified and directed by Engr-in-Charge.

S&F in repairs, sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.

S&F in repairs for Waste coupling of PTMT (half or full threaded). (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel curtain rod 25 mm dia with brackets and finials complete all as specified and directed by Engr-in-Charge

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends 110mm bore complete all as specified and directed by Engr-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.

M&L Granite slab 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-Charge.

M&L machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 20 mm thick cement screed /rendering in CM 1:4 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed by Engr-in-Charge.

M&L machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and directed by Engr-in-Charge.

Dismantling boarding any description fixed in any position with nails / screws complete all as specified and directed by Engr-in-Charge.

S&F 18mm thick plywood, grade BWR, type BB, fixed with screw to timber frame work, including 1mm thick PVC moulding all around including edging, complete all as specified and as directed by Engr-in-charge.

M&L for .90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

S&F drawer side telescopic channel of standard size of standard length, inclusive of roller for moving drawer, mild steel bright finish or electrogalvanised width of flap 30mm (ISI Marked), complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel multipurpose baskets in wooden drawer / partition for storage made of 4mm dia stainless steel rods, fixed in side partition etc, complete all as specified and directed by Engr-in-Charge.

S&F steel concealed hydraulic auto soft closing hinges fixed to wooden frames/shutters in cupboard complete all as specified and directed by Engr-in-Charge.

S&F in repair 100mm brass handles, cast type, polished bright complete all as specified and as directed by Engr-in-charge.

M&L complete removal of existing treatment and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed by Engr-in-Charge.

M&L for anti-termite treatment of soil under existing floors using emulsion @1 litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floors complete all as specified and directed by Engr-in-Charge.

M&L for anti-termite treatment for points of contract of wood work by chemcial emulsion (in oil kerosene based solution) @0.5 litre per hole drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-in-Charge.

Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square but exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S & F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

M/S SHREE RAM DUBEY AND SONS

TARUN BUILDERS

VISHWA MITTAR PACHYALA

ASIA BUILDER

APARANA ENTERPRISES