Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.8 L+₹2.2 L (6.13%)Rejected-Finance D 89 SHASTRI NAGAR MEERUT 250004 | MEERUT | UTTAR PRADESH | 250004 | L2 | Rejected-Finance Second lowest | |
| 3 | L3₹37.9 L+₹2.3 L (6.49%)Rejected-Finance | L3 | Rejected-Finance Third lowest | |
| 4 | L4₹38.5 L+₹2.9 L (8.18%)Rejected-Finance 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L4 | Rejected-Finance Forth lowest | |
| 5 | L5₹38.7 L+₹3.1 L (8.82%)Rejected-Finance 159 SHIV NAGAR MODIPURAM MEERUT 250 110 UP | MEERUT | MEERUT | UTTAR PRADESH | 250110 | L5 | Rejected-Finance Fifth lowest |
Tender Value
₹49.0 L
EMD Value
₹97,960
Closing Date
14 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
Office of the GE (North) Meerut Cantt
Spl repair to Bldg No 33 RA Line (OR) Living Accn at 409 Fd Hosp and repair of seewage Lines Near Building No E-19 to E-27 at Dogra Farm of 115 Engr Regt of AGE B/R-I AGE B/R-II and AGE E/M-I of GE (North) Meerut Cantt
2023_MES_609139_1
8421/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹97,960
Yes
2 Sept 2023
14 Jul 2023
16 Aug 2023
14 Jul 2023
14 Aug 2023
31 Jul 2023
Amount
Taking down cement plaster on Brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
Demolition of brick work or stone boulders masonary built in cement mortar including all arches, pillars etc complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including floor finishes and disposal of debris complete all as specified and directed.
Dismantling, Asbestos cement (Plain, corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.
Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified and directed.
M&L for brick work with fly ash sub class 'B' old size bricks straight or curved on plain exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brickwork old size with subclass `B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 except bricks complete all as specified and directed.
M&L for brickwork old size with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 except bricks complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed.
Dismantling wall and ceiling boards(fiber, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.
S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed.
S&F fiber cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminum frame work with screws/clips complete all as per manufactures instructions complete all as specified and directed.
S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with single cleats or other connecting plates quality conforming to Fe-410W(Gde E-250). quality A complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.
M&L for cement concrete 1:3:6, type C2(40mm graded stone aggregate) as in 75 mm thick plinth protection complete all as specified and directed.
M&L for cement concrete 1:2:4, type B0(12.5mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angle and throating as complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on wall of brick work of concrete surface, finished fair and even complete all as specified and directed.
M&L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid separately Note : Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.
Supply only integral water proofing compound complete all as specified and directed.
M&L for preparing the new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed
M&L for applying two coats of cement base paint on walls after complete removal of existing treatment complete all as specified and directed :
M&L for applying two coats of oil bound distemper over 2mm thick putty and over one coat primer on newly plastered surfaces of wall complete all as specified and directed :
M&L for applying two coats of oil bound distemper over 2mm thick putty and over one coat primer on wall surface surfaces after complete removal of existing treatment complete all as specified and directed :
M&L for Pre polished Machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick screed bed for laying floor finishes in CM 1:6. cement laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beeswax polishing to receive granite finish complete all as specified and directed :
M&L for Pre polished kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed :
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 sqm but not exceeding 4 sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces complete all as specified and directed.
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately)
S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly → supplied and fitted to chowkats complete all as specified and directed
S&F aluminum sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed
S&F 100mm butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed
S&F aluminum anodized tower bolts 150mm long, of extruded section complete all as specified and directed
Supply & fix 150mm size aluminum alloy handles cast type anodized complete all as specified and directed
S&F 150mm long floor door stopper of aluminum alloy body and tongue with hard drawn steel spring complete all as specified and directed.
S&F mild steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded complete all as specified and directed
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded complete all as specified and directed
S&F framed work such as grill framed guard for fixing arrangement for wire cloth etc complete all as specified and directed
S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed
M&L stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed
S&F in repair 25mm dia, powder coated, fancy type, aluminum decorative tubular curtain rod with decorative ball type side brackets complete all as specified and directed.
M&L for chequered cement concrete colour tiles size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L for PCC 1 : 4 : 8 Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out and leveling of bottom surface to required level complete all as specified and directed.
Returning ,filling in including spreading ,leveling watering and well ramming of soft/loose soil in layers not exceeding 25 cm thick each complete all as specified and directed.
Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exceeding 1.5 metre above the starting point complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.
All as per Srl item No 50.00 here-in-before but 5mm dia and over up to and including 10mm dia as in stirrups, spacers / binders complete all as specified and directed
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC / PCC bends in wall, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified and directed.
M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; flat fair finished surfaces of concrete flat complete all as specified and directed.
Demolition of cement concrete in drain pipe and disposal of debris complete all as specified and directed.
M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) complete all as specified and directed.
M&L for cement concrete 1:2:4, type B-1 (20mm graded stone aggregate) as in benching / coping the like weathering slightly rounded or chamfered angles & throating including all finishing exposed surface including necessary from work complete all as specified and directed.
M&L for PE DWC (Double wall corrugated) pipes confirming IS-16098 Part-2 2013 pertaining structured wall plastics pinning system for sewerage 150mm bore pipe SN-8 and all necessary fitting and fixture complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate) as in cover slab chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in cement mortar 1:4 complete all as specified and directed.
M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type B-1 (using 20 mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for construction of Soakage well of size 1.20 m diax3.00m deep excavated in ordinary soil, foundation in PCC 1:3:6, walls of honey combed and solid brick in cement mortar including RCC cover slab in M-25, filling work with brick bats complete all as specified and directed. Ref TD HQ CEBZ drg No TD/309 sheet No 1/4, 2/4, 3/4 & 4/4 complete all as specified and directed.
M&L for Cutting into existing manholes for connecting new drains,( internal dia of pipe upto 225 mm ) making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-I smooth finished, and reforming benching as required complete all as specified and directed.
Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of any size25 to 32 mm dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :- One tube light/Bulb point/ street light point controlled by one, one way switch 05 / 06 Amps.
All as per Srl item No 64.00 here-in-before but One fan / Exhaust Fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
All as per Srl item No 64.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.
All as per Srl item No 64.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.
All as per Srl item No 64.00 here-in-before but One Bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
All as per serial item No 64.00 here-in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board complete all as specified and directed.
S&F switch piano flush type 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.
S&F in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.
S&F of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed of make Cona/Legrand/SSK complete all as specified and directed.
S&F in switch piano flush type 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.
S&F bell push flush type , 5 amps , 240 volts make Plaza/Cona/SSK complete all as specified and directed.
S&F Bell, AC 230 volts Single polar Cona/Anchor complete all as specified and directed.
S&F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.
S&F LED lamp 9/10 watt complete all as specified and directed.
S&F decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed.
S&F decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed
S&F 35W LED building security light energy saving & environmental friendly long life luminaries with high power LEDs as light source and electronic driver including all material required for fitting complete all as specified and directed
S&F in repairs LED Recess mounted, ceiling panel, 2'x2' , 36 Watts, 240V light fitting with heat exchanger unit complete all as specified and directed.
S&F ceiling rose, 3 terminal / PVC/ polycarbonate isolated body complete all as specified and directed
M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing, and taking down sub main wiring complete all as specified & directed.
S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down DB's any type/any size complete all as specified and directed
S&F MCB, SP, AC, 240 volts "B" series capacity of 06 to 40 Amps, 10kA and making connections complete all as specified & directed.
S&F MCB, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps to 40 Amps 10kA and making connections complete all as specified & directed.
S&F MCCB 4 pole, 415V, Adjustable type,160 Amps with breaking capacity 36 KA complete all as specified and directed
S&F Vertical Load line sheet metal enclosure double door, Triple pole and neutral (TP&N vertical load line) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with provision of 25 kA 100 Amp G frame MCCB. Make- Legrand/ Schneider/ ABB with the inbuilt provision for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one and taken down old DB complete all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
S&F exhaust fan AC single phase 230/240,metallic body of size 300mm sweep with louver complete all as specified and directed.
S&F ceiling fan with fan regulator 1200 mm sweep BEE ,BLDC Fan , AC,230V complete all as specified and directed
mohanlal gupta
AMBEY CONSTRUCTION
Manglam Engineers and Construction Co
Arun Construction Co.
Shri Kanchan Engineers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .