REPAIR / REPLACEMENT OF LT UG CABLE, MCBBS LIGHT FITTINGS INCLUDING STREET LIGHT POLE PAINTING IN MH, 414 ASC BN, 52 SUPPLY DEPOT AND REPAIR / REPLACEMENT OF LED LIGHT FITTING, REWIRING, FAN AND GEYSER REPAIR AND OTHER MISC E/M WORKS IN UNIT 371 AREA

Amount

Taking down the unserviceable LT cable of any size from tranches/ walls /floor etc complete all as specified and as directed. Note :- laying of cable route is same as old cable route .

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 240 Sqmm, 3.5 core including testing after laid and jointed all as specified and as directed. Make:- Havels, KEI, Finolex, Polycab. Note:- Excavation and earth work, cable protection shall be measured and paid separetely.

All as per item No. 2 but cable size 185 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 150 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 120 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 95 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 70 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 50 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 35 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 25 Sqmm 3.5 core all as specified and as directed.

All as per item No. 2 but cable size 16 Sqmm 4 core all as specified and as directed.

All as per item No. 2 but cable size 10 Sqmm 4 core all as specified and as directed.

Excavation in trenches in soft/loose of soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables, poles, stay and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point all as specified and as directed .

Supply and fix in repair Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 120 mm outer diameter and 103.5 mm inner Diameter with IS 16285 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and as directed.

Supply and fix in repair Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 90 mm outer diameter and 75 mm inner Diameter with IS 16285 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and as directed.

Supply and fix in repair Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 63 mm outer diameter and 51 mm inner Diameter with IS 16285 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and as directed.

Supply and fix in repair Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 50 mm outer diameter and 38 mm inner Diameter with IS 16285 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and as directed.

Material and labour for testing the cables with high voltage DC testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault, disconnecting faulty 1100 Volt LT cables of different sizes from both ends, removal of Fault, Re-connections and testing of cables after removal of fault complete all as specified and directed. Notes : (i) All T&P and other accessories required for checking and finding of fault in cable shall be provided by the Contractor (ii) Charges/rent of the fault locating mobile machine, operator, engineer, electricians etc shall be deemed to included rate quoted by Contractor. (iii) Checking and finding fault upto 05 places of same route of the cable will be considered as one Job.

Supply and fix in repair Heat shrinkable straight through cable jointing kit for 1100 Volts grade cable joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 240 Sqmm. Note :- Any Excavation and earth work, Returning and filling, Removing involved shall be measured and paid separately.

All as per item No. 21 but cable size 70 Sqmm to 95 Sqmm all complete as specified and directed.

All as per item No. 21 but cable size 16 Sqmm to 50 Sqmm all complete as specified and directed.

S&F in renewal MCCB 63 Amps, 4 Pole, 415V, 50 Hz, Adjustable type, with breaking capacity 16 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 100 Amps, 4 Pole, 415V, 50 Hz, Adjustable type, with breaking capacity 25 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 125 Amps, 4 Pole, 415V, 50 Hz, Adjustable type, with breaking capacity 25 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 160 Amps, 4 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 200 Amps, 4 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 250 Amps, 4 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 320 Amps, 4 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 400 Amps, 4 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 63 Amps, 3 Pole, 415V, 50 Hz, Adjustable type, with breaking capacity 16 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 100 Amps, 3 Pole, 415V, 50 Hz, Adjustable type, with breaking capacity 25 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 125 Amps, 3 Pole, 415V, 50 Hz, Adjustable type, with breaking capacity 25 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 160 Amps, 3 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 200 Amps, 3 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 250 Amps, 3 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 320 Amps, 3 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

S&F in renewal MCCB 400 Amps, 3 Pole, 415V, 50 Hz, microprocessor release based type, with breaking capacity 36 KA, Ics=100% of Icu, including taking down of old unserviceable MCCBs complete all as specified and directed. Make:- Legrand / L&T / ABB / Siemens / Schneider

Supply and fix in repair LED street light luminaires of capacity 60 watts with pressure die cast aluminium housing heat resistance toughened glass, IP 66 protection and efficacy minimum 120 Lumen per watt, complete with driver, including three core copper flexible wire of size 0.75 Sqmm for connection from street light fitting to OH line or junction box, fixing accessories and complete all as specified and as directed. Make:- Havels, Crompton, Philips, Bajaj.

S&F in repair LED driver for 60W LED street light fittings complete all as specified and as directed. Make:- Havels, Crompton, Philips, Bajaj.

S&F in repair LED driver for 45W LED street light fittings complete all as specified and as directed. Make:- Havels, Crompton, Philips, Bajaj.

Supply and fix in repairs thermoplastic cable entry junction boxes of size 250 x 220 x 135 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed. Make:- Sintex, Naptune, Hensel

Supply and fix in repair bracket for street light fittings made out of 32 mm dia GI pipe of light grade 1.5 m long each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 30 x 5 mm flat iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with two coat of aluminium paint over a coat of red oxide primer and fittings bracket to street light fitting including taking down old unserviceable bracket of any shape and size complete all as specified and as directed. Make of GI pipe:- TATA, JINDAL, PRAKASH SURYA

M&L for preparing surfaces of electric poles of any type of following sizes including MS cross arms, MS clamps, street light brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of primer and two coat of aluminium paint completely, alternate layer of yellow and black paint of 150 mm strip at the bottom of pole 1.5 mtr above coping with synthetic enamel paint complete all as specified and as directed. Height of rail /tubular poles exceeding 7.5 Mtrs upto 11 Mtrs above ground level.

All as per item No. 45 but height of steel tubular poles 7.5 Mtrs above ground level complete all as specified and as directed.

M&L for preparing surfaces of electric poles of RCC type of any sizes including MS cross arms, MS clamps, street light brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of primer and two coat of weather proof paint completely and alternate layer of yellow and black synthetic enamelled paint of 150 mm strips at the bottom of pole 1.5 mtr above coping complete all as specified and as directed.

M&L for preparing surfaces of electric TWO pole Structures of any make and height of pole up to 10 Mtrs above ground level including MS cross arms, AB Switch pipe, DO Fuse assembly, MS clamps, brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of aluminium paint complete all as specified and as directed.

M&L for preparing surfaces of electric Four pole Structures of any make and height of pole up to 10 Mtrs above ground level including MS cross arms, AB Switch pipe, DO Fuse assembly, MS clamps, brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of aluminium paint complete all as specified and as directed.

M&L for writing pole No. with letters of size 25 mm height on pole/ plate with Black synthetic enamelled paint complete all as specified and directed.

M&L for Spray painting to existing LT Panel of any capacity / size / type including mounting angle with two coats of approved colour synthetic enamel paint complete including dusting, cleaning of existing dust before applying synthetic enamel paint and writing feeder name with approved colour synthetic enamel paint complete all as specified and directed.

Supply, erecting & fixing in replacement of steel tubular swaged pole complete with base plate, pole cap, nut bolt washer etc type 410 SP-37 (9.5 metres long) swaged poles conforming to IS 2713 (Part-I to III) 1980 all as specified including two coats of black bitumen paint through out internally and externally upto planting depth and applying two coats of aluminum paint over one coat of red oxide primer (externally) and Numbering of poles as directed including excavation /earth work, PCC 1:4:8 type D-2 using 40mm aggregate for pole foundations of size 600x600x1500mm height upto ground level and using PCC 1:2:4 B-1 for coping with size 450x450x300mm including necessary formwork complete with including taking down old unserviceable pole all as specified and as directed.

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including GI wire 4.0 mm as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 40mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 32 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (a) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Materials and labour as in replacement for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40 mm bore, light grade 7.5m long as applicable and as per plate No. 3 of SSR 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 40 mm nominal bore medium grade GI protection pipe 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Supply and fixing in repair retro reflective boards in shape of rectangle of size 1.0 m x1.4 m made out of 2 mm thick stainless steel both side bounded/pasted with high prismatic (iv) sheet mannufactured by avery dennison or 3 M with desired letters/logos designed as directed the board shall be supplied with and including stainless steel frame made out of 25 mm dia pipe in frame around duly welded with and including stainless steel sheet and stainless steel posts of 38 mm dia and full length of 2.20 m one side and 2.8 m other side complete all as specified and directed. ( Note :(i) Rate for fixing of boards with PCC 1:2:4 type B2 filling of size 45x45x60 cm to be incl in unit rate. (ii) The board should be written description as direction given by Engineer-in-Charge)

M&L for Loose filling with aggregates of gauge 40 to 80 mm crushed stone back colour suitable for spreading in electrical sub stn after preparation site by removing all type of debris, removing unwanted soil, and spreading lime powdwer beneath the aggregate all as directed.

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, 4 sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire. Make:- Havels, KEI, Finolex, Polycab.

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, 6 sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire. Make:- Havels, KEI, Finolex, Polycab.

S & F in replacement 1100 Volts grade Copper conductor, PVC insulated, round sheathed (flexible), industrial cable, 1.5 sqmm 3 core complete all as specified and directed. Make:- Havels, KEI, Finolex, Polycab.

Supply and fixing in replacement LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete with taking down old unserviceable flood light complete all as specified and as directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fixing in replacement LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete with taking down old unserviceable flood light complete all as specified and as directed. Make:- Havels, Crompton, Bajaj, Philips.

S&F in replacement ONLOAD Changeover switch 200 Amps, 4 Pole, 415 V in sheet steel enclosure suitable for fixing on wall at existing position, including with all incoming and outgoing connection with cable lugs, washers, nutbolts and accessories complete with taking down old unserviceable changeover switch complete all as specified and as directed. Make:- Siemens / L&T / ABB / Crompton

S&F in replacement ONLOAD Changeover switch 100 Amps, 4 Pole, 415 V in sheet steel enclosure suitable for fixing on wall at existing position, including with all incoming and outgoing connection with cable lugs, washers, nutbolts and accessories complete with taking down old unserviceable change over switch complete all as specified and as directed. Make:- Siemens / L&T / ABB / Crompton

Supply and fixing in replacment Automatic Load Transfer Switch Changeover 63 Amps, 4 Pole with CM 331 Controller, 415 Volts, with 16 A DP MCB for protection with all all control wiring , incoming and outgoing connection with cable lugs, washers, nutbolts, Sheet Enclosure Box (2mm thick sheet ) which is suitable of outdoor and accessories complete with taking down old unserviceable changeover switch all as specified and as directed. Make :- HPL Item code ATS063 4 POS or equivalent

Supply and fixing in replacment Automatic Load Transfer Switch Changeover 100 Amps, 4 Pole with CM 331 Controller, 415 Volts, with 16 A DP MCB for protection with all control wiring , incoming and outgoing connection with cable lugs, washers, nutbolts, Sheet Enclosure Box (2mm thick sheet ) which is suitable of outdoor and accessories complete with taking down old unserviceable changeover switch all as specified and as directed. Make :- HPL Item code ATS100 4 POS or equivalent

Supply, fixing and testing in replacement of Automatic Street light Timer Switch using combination of NATURE SWITCH for automatic switching of street lights based on LUX level of natural light consisting with Sensor (Natural Switch) along with suitable power contractor, MCB and support terminals should be enclosed in pole/ wall mountable SMC enclosure made out of Rust proof, Electric shock proof, termite proof and FR grade SMC junction Box conforming to IP 54 protection of capacity 12 KW 3 phase, current range 40 Amps, 4 wire (3 separate power contactor) including all accessories and fixing arrangement all as specified and directed. Model No. Swadeep - 02EC-8kW3P.

Supply, fixing Outdoor type cubicle Bus Bar aluminium Chamber 400 Amps for three phases, 4 wire , CPRI approved IP-65 protection rupturing capacity at 415 volts, factory made having powder coating including earth work, necessary angle iron and PCC foundation of size, complete all as specified and directed.

Supply, fixing Outdoor type cubicle Bus Bar aluminium Chamber 300 Amps for three phases, 4 wire , CPRI approved IP-65 protection rupturing capacity at 415 volts, factory made having powder coating including earth work, necessary angle iron and PCC foundation of size, complete all as specified and directed.

Supply, fixing Outdoor type cubicle Bus Bar aluminium Chamber 200 Amps for three phases, 4 wire , CPRI approved IP-65 protection rupturing capacity at 415 volts, factory made having powder coating including earth work, necessary angle iron and PCC foundation of size, complete all as specified and directed.

Supply, fixing Outdoor type cubicle Bus Bar aluminium Chamber 100 Amps for three phases, 4 wire , CPRI approved IP-65 protection rupturing capacity at 415 volts, factory made having powder coating including earth work, necessary angle iron and PCC foundation of size, complete all as specified and directed.

M&L for drilling suitable dia horizontal bore holes for insertion/ laying of upto 110mm bore HDPE pipe/GI pipe of any description below/under existing road surfaces/apron /floors etc with using mechanical and / or manual devices as required at site including making good the disturbed surfaces to match with the existing strata after laying pipes complete all as specified and directed. (NOTE : (i) Pipes shall be laid minimum 60 cm below/under existing road surfaces/ apron /floors etc). (ii) Equipment, tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor without any extra cost to the Govt.

Supply and fixing in replacement of GI tubing, 100 mm bore, light grade as in sleeving/protection of cable etc fixed on pole / wall etc. with and including suitable size of MS clamp and nut, bolt, washer etc, complete all as specified and directed. Make:- TATA, JINDAL, PRAKASH SURYA

Supply and fixing in replacement of Contactor of type MU-2P series (rating 16 A / 25A / 40A) suitable for existing Automatic Street light Timer Switch complete with taking down old unserviceable Contactor all as specified and as directed. Make - L&T/ BCH.

Supply and fixing in replacement of Contactor of Freedom series, 3 pole (rating 18 A / 25A / 40A) suitable for existing Automatic Street light Timer Switch complete with taking down old unserviceable Contactor all as specified and as directed. Make:- L&T / BCH

Cleaning of sub station area by uprooting all types vegitation, shrubs, weeds, saplings and creepers of unwanted trees complete with the help of spade, axes, crowbars, by chemical spraying and other mechanical means after taking necessary electrical shutdown from concerned incharge of various sub stns of Military Stn Kamptee.

Trimming of tree branches touching of Over head Elecctrical Lines upto 2.5 mtr distance from conductors after taking necessary shutdown from concerned incharge all as directed . (Note : Space between two poles will be measured as distance in RM irrespective of nos of conductors).

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. Make:- Havels, KEI, Finolex, Polycab.

As per item No 80 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and as directed.

As per item No 80 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and as directed.

As per item No 80 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and as directed.

All as per item No 80 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps at same board with other power point complete all as specified and as directed.

All as per item No 80 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and as directed.

As per item No 80 above but One light point controlled by two way switches complete all as specified and as directed.

As per item No 80 above but One bell/buzzer point controlled by one bell push complete all as specified and as directed.

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in existing PVC conduit concealed on wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. Make:- Havels, KEI, Finolex, Polycab.

As per item No 88 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and as directed.

As per item No 88 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and as directed.

As per item No 88 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and as directed.

All as per item No 88 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps at same board with other power point complete all as specified and as directed.

All as per item No 88 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and as directed.

As per item No 88 above but One light point controlled by two way switches complete all as specified and as directed.

As per item No 88 above but One bell/buzzer point controlled by one bell push complete all as specified and as directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. Make:- Havels, KEI, Finolex, Polycab.

As per item No 96 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and as directed.

As per item No 96 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and as directed.

Supply and fix ceiling rose surface type 3 terminal 5 amps complete all as specified and directed.

S&F Bell ding dong, AC 230 volts, single phase complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate suitable for angle/ batten fitting complete all as specified and directed.

Supply and fix Modular switch one way 6A, 1 module complete all as specified and directed.

Supply and fix Modular switch one way 16A, 1 module complete all as specified and directed.

Supply and fix Modular switch two way 6A, 1 module complete all as specified and directed.

Supply and fix Modular bell push 6A, 1 module complete all as specified and directed.

Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix Modular Fan step regulator,120 watt 2 module 5 step complete all as specified and directed.

Supply and fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and fix switch flame proof rotary type with termination box in LM6, 16A, double pole 250V complete all as specified and directed.

Taking down carefully 20 watt tube light fittings for reuse at site or carrying to the store complete all as specified and directed.

Refixing LED light fitting 20 watt 220 V AC decorative type with driver, holder and LED tubelight including connecting up with three core flexible copper conductor cable of suitable size from ceiling roses complete all as specified and directed.

Supplying and fixing 20 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fixing LED light fitting 30 watt flame proof, CMRI certified recommended dor gas / vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supplying and fixing 20 watt, 4ft LED inverter batten fittings, works on AC supply in Normal mode and DC supply in inverter mode, with inbuilt battery back up of upto 4 hours, high efficiency complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fixing 20 watt, 4ft inbuilt sensor based smart LED auto dimmable batten, dimming from 100% of rated wattage to 30% on sensing of movement / occupancy, made from powder coated extruded aluminium housing, opaque glare free diffuser, pre wired with all accessories including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fixing 5 watt LED reading light fitting white colour powder coated housing with movable string, metallic base, complete with driver to operate on 240V AC 50Hz, suitable for indoor application complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fixing round / square shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

All as per item No 120 here in before but 12 watt LED light complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

All as per item No 120 here in before but 15 watt LED light complete all as specified and directed. Make:- Havels, Crompton, Bajaj, Philips.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specified and as directed. Make:- Havels, L&T, Legrand.

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door. Make:- Havels, L&T, Legrand.

Supply and fix sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door. Make:- Havels, L&T, Legrand.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as directed by the Engineer-in-Charge. Make:- Havels, L&T, Legrand.

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed. Make:- Havels, L&T, Legrand.

Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and as directed. Make:- Havels, L&T, Legrand.

Disconnect and insulate electric supply wire and taking down carefully ceiling/exhaust/cabin/ wall fans of any make and sweep dismantling blades, check for repairs required Note : Repairs/ Replacement of spares shall be carried out under appropriate items.

Hanging only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector , painting with spray paint and testing Making of MES No as directed and specified Note : The fan shall be fitted with new set of clamps rubber shackle split pins and top and bottom nut bolts etc. complete all as specified and as directed.

M & L Painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Opening up of fan motor of ceiling/Exhaust/ wall/cabin fans cleaning starter rotor, cleaning of all parts greasing oiling of bush and bearing reassembling and testing for smooth functioning complete all as specified and directed.

M&L for taken down burnt/damaged winding, cleaning stator and rotor including slots etc, rewinding with suitable gauge of super enameled copper insulated wire for ceiling fan 1200 mm sweep all as specified and as directed

Supply only bearing of replacement for Ceiling fan 1200mm sweep complete all as specified and directed. Make:- SKF, NBC.

Supply only gun metal bush for ceiling fan 1200mm sweep complete all as specified and directed.

Supply only for replacement of condenser AC 230 Volt 2.5 MFD complete all as specified and directed. Make:- Havells / Tibcon / Epcos

Supply only ceiling fan blades 1200mm sweep complete with nuts and bolts as per sample complete all as specified and directed. (ISI Marked)

Supply only for shaft work of ceiling fan of any make and sweep complete including filling metal and lathe machining complete all as specified and directed. (ISI Marked)

Supply only for down rod for ceiling fan of any make and sweep made out of medium grade GI tubing 15mm dia duly painted with two coat of enamel paint and provision of holes for electric wire at top and bottom also arrangement for fitment of ceiling fans complete all as specified and directed. (ISI Marked)

Taking down carefully geyser/water heater of any Make type & size including disconnecting water connection plug water flow, for repairs and refixing the same to original position after repairs including decaling the inner tank and tubing and marking of MES No with synthetic enamel paint, black colour complete all as specified and as directed. Note:- (i) Spares required for replacement shall be measured and paid separately as Supply and Fix under respective items of this schedule. (ii) Quoted rates shall be deemed to be included for any GI Fitting, screwing, required during connecting/ disconnecting water supply.

Supply only thermostat any type, suitable for geyser, ISI marked complete all as specified and as directed. (ISI Marked)

Supply only PVC threaded tough rubber flexible pipe/ tubing of standard length 450 mm for geysers inlet/outlet connections complete all as specified and as directed. (ISI Marked)

Supply only three pin plug top 15 amps complete all as specified and as directed. (ISI Marked)

Supply only PVC insulated copper conductor PVC sheathed three core 2.50 sq mm flexible cable complete all as specified and as directed.

Supply only brazing the inner tank of geyser of any size and type after thorough check of leak complete all as specified and as directed. (ISI Marked)

Supply only water heater element any type (Cup/ Triangular /square) of capacity 1/1.5 KW complete all as specified and as directed. (ISI Marked)

Supply only water heater element any type (Cup/ Triangular /square) of capacity 2.0 KW complete all as specified and as directed. (ISI Marked) (MAP Accn Type)

Supply and Fix non-return valve made of brass 15mm dia ISI marked complete all as specified and as directed.

Supply and fix stop valve cast copper alloy, fancy type chrome plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia pipe complete all as specified and directed.

M&L for dusting / cleaning removing burrs on outer surface of geyser of any type complete for painting and spray painting with two coats of synthetic enamel paint of approved colour, for 50 ltrs capacity complete all as specified and as directed.

M&L for dusting / cleaning removing burrs on outer surface of geyser of any type complete for painting and spray painting with two coats of synthetic enamel paint of approved colour, for 25 ltrs capacity complete all as specified and as directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 93,594.00]

Chinmaya Enteprises (BID ID -3110880)