KMC/EH/HER/01/2025-26

Amount

Supply of ornamental cast iron railing as per enclosed design and drawing including sand blasting, necessary grinding, machining, painting with one coat of red oxide primer and spray painting of any shade with mat finish etc. including the supply, fitting, fixing by nuts & bolts (4nos. holding down bolts of dia 16mm, length 0.40m on each post), hoisting transportation at site. (The rate rupees per Kg and inclusive of supply at site.) NB: Weight per piece (2.4mX1.29mX.08m) approx. 300 Kgs. approximate quantity requirement 120000Kg. Please refer Fig.1

Supply of ornamental cast iron lamppost for footpath as per enclosed design and drawing including sand blasting, necessary grinding ,machining, painting with one coat of red oxide primer and spray painting of any shade with mat finish including special type of acrylic lamp shade as per design & drawing and all internal electrical fitting & fixtures for lighting etc. including the supply, fitting & fixing by nuts & bolts (4nos.holding down bolts of dia 20 mm, length 0.5m for each lamppost) hoisting transportation at site. The weight of each lamppost should not be less than 450 Kgs.(The unit rate should be quoted Rupees per piece. The rate is inclusive of supply at site.) Approximate quantity requirement 25 nos. Please refer Fig.2

Supply of ornamental cast iron lamppost for Median as per enclosed design and drawing including sand blasting,necessary grinding machining, painting with one coat of red oxide primer and spray painting of any shade with mat finish including special type of acrylic lamp shade as per design & drawing and all internal electrical fitting & fixtures for lighting etc. including the supply, fitting, fixing by nuts & bolts (6nos. holding down bolts of dia 25mm, length 0.55m for each lamp post), hoisting transportation at site. The weight of each lamp post should not be less than 800kgs. Approximate quantity requirement 20 nos. Please refer Fig.3

Supply of ornamental cast iron Bollard for footpath as per enclosed design and drawing including sand blasting, necessary grinding.machining,painting with one coat of red oxide primer and spray painting of any shade with mat finish etc. including the supply,fitting, fixing by nuts & bolts (4nos. holding down bolts of dia 16mm, length 0.40m for each Bollard), hoisting transportation at site. The weight of each bollard should not be less than 180Kgs. The rate is inclusive of Supply at site. Approximate quantity requirement 18nos. Please refer Fig.4

M/S KHAITAN IRON FOUNDRY PVT. LTD. (BID ID -6443885)

D K GUHA (BID ID -6451702)

BIDYUT BANI (BID ID -6455773)