Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC NO 306 SCION AVENUE 4TH A CROSS KAGGADASPURA NEAR GANAPATHI TEMPLE BANGALORE 560093 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560093 | L1 | Accepted-AOC Being the lowest bidder | |
| 2 | L2₹13.5 L+₹1.6 L (13.6%)Rejected-Finance NO 3 JAMI JAM KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | CHENNAI | TAMIL NADU | 600014 | L2 | Rejected-Finance Not being the lowest bidder | |
| 3 | L3₹13.6 L+₹1.7 L (14.5%)Rejected-Finance N0 15 ASHOK NAGAR MAIN ROAD MES ROAD 3RD CROSS STREET EAST TAMBARAM CHENNAI 600 059 | CHENGALPATTU | TAMIL NADU | 600059 | L3 | Rejected-Finance Not being the lowest bidder | |
| 4 | L4₹13.8 L+₹2.0 L (16.5%)Rejected-Finance NO E 193 12TH CROSS ROAD 3RD STREET PERIYAR NAGAR CHENNAI 600 082 | CHENNAI | TAMIL NADU | 600082 | L4 | Rejected-Finance Not being the lowest bidder | |
| 5 | L5₹13.9 L+₹2.0 L (16.7%)Rejected-Finance NO 2 RAJAJI STREET SRI DEVI NAGAR SOUTH KAMARAJ NAGAR CHENNAI 600 071 | CHENNAI | CHENNAI | TAMIL NADU | 600071 | L5 | Rejected-Finance Not being the lowest bidder |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
22 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CHENNAI
FORT SAINT GEORGE CHENNAI
REPAIR REPLACEMENT OF WOODEN AND ALUMINIUM JOINERY AND CONNECTED WORKS AT ZONE B E AREA UNDER GE CHENNAI
2022_MES_559652_1
8623/E8
Open Tender
Civil Works
Item Rate
183 days
FORT SAINT GEORGE CHENNAI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE CHENNAI
₹30,000
Yes
1 Feb 2023
25 Oct 2022
29 Nov 2022
25 Oct 2022
22 Nov 2022
8 Nov 2022
Amount
Cutting holes in brick/ stone walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate for the required depth of embedded portion of holdfasts or lugs measured from the face of jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed.
Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc., complete all as specified and as directed.
Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4sqm each along with fittings including separating guard bars/ grills/ wire mesh etc., complete all as specified and as directed.
Taking down chowkats (or) frames of any description of area exc. 1.5 sqm but n. exc. 4sqm each complete all as specified and as directed.
Taking down shutters of any description exc. 1 Sqm but n. exc. 2 sqm each including all fittings complete all as specified and directed.
Taking down shutters of any description n.exc. 1 Sqm each including all fittings complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc with new iron mongry complete all as specified and directed.
S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed.
M&L 35mm thick flush door shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc. complete all as specified and directed.
S&F 2nd class hardwood plain framed panelled shutters 35mm thick, (any No of panels) with 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.
S&F 2nd class hardwood glazed and skeleton door shutters 35mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24(a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.
S&F for 2nd class hardwood glazed and skeleton window/ ventilator shutters 35mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24(b) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 100mm long all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed.
S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S&F mild steel butt hinge, medium weight cold rolled 75mm size all as specified and directed.
S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.
S&F inrepairs continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.
S&F in extruded aluminium alloy handle cast type anodised 100mm size all as specified and directed.
S&F extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.
S&F floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.
All as per item No. 23.00 above but fixed in repairs.
S&F inrepairs aluminium (Die cast) body door closer hydraulically regulated, designate No. 2, universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg all as specified and directed.
S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.
All as per item No. 26.00 above but fixed in repairs.
S&F in repairs 75mm size, 4 lever grade 1 brass lock for drawer, cupboard shutter etc. all as specified and directed.
S&F inrepairs mild steel mortice lock vertical type 4 levers of size 100mm with stainless steel handle set suitable for right or left, inside or outside for opening doors fixed with brass screws complete all as specified and directed.
S&F inrepairs mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
S&F in repairs stainless steel cabinet hinge/ self closing hinge/ auto hinge complete all as specified and directed.
S&F in repairs magnet door catcher for cabinet cupboard shutters etc. complete all as specified and directed.
S&F aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.
S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete all as specified and directed.
M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.
S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F in repairs powder coated aluminium sliding window having thickness of powder coating not less than 50 micron and colour as approved by GE, using aluminium sections (three tracks) weighing not less than 0.495 Kg/RM for frame and 0.48kg/ RM (Interlock) for shutters fixed with sash bars, aluminium anodised snap beads, screws including three sliding shutters, two fully glazed shutters with 5.0mm thick tinted glass fixed with glazing clips and rubber packing and one wire mesh shutter aluminium alloy wire mesh, fixed screws, roller, interlocking handles etc. complete all as specified and directed.
S&F in repairs powder coated aluminium ventilators using aluminium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodized snap beads, screws and fixed alongwith with 5mm thick frosted/ pin headed glass fixed with glazing clips and one for wire mesh shutter fixed on frame etc. including provision of builders hard ware such as wire mesh, stainless steel hinges, aluminium handles, locking arrangements etc. complete all as specified and directed
M&L for 18mm thick plywood grade BWR, type BB with 0.90mm thick decorative laminates type-1 fixed with screws to timber frame work fixed in repairs complete all as specified and directed.
M&L for 18/ 19mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white laminations fixed to timber frame work with screws fixed in repairs complete all as specified and directed.
M&L for 6mm thick teak wood lipping over 18mm thick plywood fixed with nails complete all as specified and directed.
M&L for 6mm thick teak wood lipping fixed to 18/ 19mm thick particle board with nails complete all as specified and directed.
Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.
M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounding complete all as specified and directed.
S&F figured glass 4mm thick, pinhead type and glazing with oil putty in square n. exc. 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds complete all as specified and directed.
M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating small articles such as hold fast etc with tar or coal tar black paint area tarred n. exc. 0.1sqm each complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
G.L.THIRUMALAI NAIDU AND COMPANY
M/s KM Marimuthu Achary
KS CONSTRUCTIONS
Sri Aruna Associates
SHRI BALAJI CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .