REPAIR /REPLACEMENT TO DOORS, WINDOWS, VENTILATORS, CUPBOARDS AND OTHER MISC JOINERY WORKS, REPAIR TO FLOORING/ PLASTERING, TILLING AND OTHER MISC SANITARY ITEMS AT AF STN FARIDABAD UNDER AOR OF GE (AF) FARIDABAD

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

M&L, First quality glazed ceramic coloured tiles of size 450x300mmx7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-Charge.

M&L, First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by Engineer-in-Charge.

M&L for fully vitrified Ceramic tiles, 10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.

M&L fully vitrified Ceramic tiles, 10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10 mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 12 mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L, Rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge.

M&L, Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3 % by weight of cement, , finished even and smooth without using extra cement, complete all as specified. Note - WPC shall be measured & paid separately.

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed by the Engineer-in-Charge.

M&L for Preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs , stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet , of size 90 cm x 60 cm x 25 cm with all internal fittings of appoved make complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound conforming to IS-2645-1975 complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge.

M & L, Brick work with sub class 'B' bricks , straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer-in-Charge.

S&F, Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer-in-Charge.

S&F 20 mm bore ,CPVC medium grade , with all fittings (like Elbow , Tee, Socket, Gi pipe connecter, nipples, tank adaptor etc) and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed by the Engineer-in-Charge.

S&F, Stop valve/ Angle valve 15 mm dia, Chromium plated brass, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed by the Engineer-in-Charge.

S&F, Stop valve/ Angle valve 15 mm dia, PTMT, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed by the Engineer-in-Charge.

S&F, Pillar taps, 15 mm bore Chromium plated brass, fancy type, with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe fixed in repair, complete all as specified and directed by the Engineer-in-Charge.

S&F, Bib taps, Chromium plated brass, 15 mm bore dia, screwed for iron pipe and fixed in repair complete all as specified and directed by the Engineer-in-Charge.

S&F, Bib tap standard of PTMT ,15mm bore dia of any colour high pressure screwed for iron pipe and fixed in repair (minimum weight 90gms) complete all as specified and directed by the Engineer-in-Charge.

S&F, Chromium plated brass shower rose 125 mm bore of rim with swivel joint fixed in repairs complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Wash basins, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts and including new brackets complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lime concrete, including making good the surface to match with existing floor finish complete all as specified and directed by the Engineer-in-Charge.

S&F, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level fixed in repair complete all as specified and directed by the Engineer-in-Charge.

S&F, PVC connection of PTMT ,non corrosive with nuts and washers on both ends, 450 mm long suitable for 15 mm bore fixed in repair , complete all as specified and directed by the Engineer-in-Charge.

S&F in repair ,15 mm bore, Brass CP mixer for wall for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F in repair ,Vitreous china bowl urinal flat back, size 465X355X265 mm white (minimum), with grating and union for discharge pipe(excluding flushing cistern,flush pipe),but including waste pipe, complete all as specified and directed by the Engineer-in-Charge.

S&F in repair, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed by the Engineer-in-Charge.

S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by the Engineer-in-Charge.

Dismantling existing water storage tanks exc 250 litres but n.exc 500 litres capacity by disconnecting existing water connection and removal from site complete all as specified and directed by the Engineer-in-Charge.

S&F, Rotational moulded PVC, tripple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve complete all as specified and directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters without taking off shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists complete all as specified and directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters without taking off shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

S&F, Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 160 of SSR Pt-II ,complete all as specified and directed by the Engineer-in-Charge.

S&F, Factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drawing on Page No 156 of SSR Part-II Rates,complete all as specified and directed by the Engineer-in-Charge.

S&F 1.25mm thick pressed steel frame of sixe 125x60mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and directed by the Engineer-in-Charge.

S&F, Factory made, 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, fitted to chowkhats of 2nd class hard wood (hollock) complete all as specified and directed by the Engineer-in-Charge.

S&F, 35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified and directed by the Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clips providing complete all as specified and directed by the Engineer-in-Charge.

S&F, Sheet glass 5.50 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares exceeding 0.5 Sq. m in each pane, complete all as specified and directed by the Engineer-in-Charge.

S&F, Figured sheet glass 5.00 mm thick, ordinary quality and glazing with oil putty (in metal frames etc) in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by the Engineer-in-Charge.

S&F, Aluminium handles ,cast type anodised of 150 mm size , complete all as specified and directed by Engineer-in-Charge.

S&F, Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm size, complete all as specified and directed by Engineer-in-Charge

S&F, Butt hinges medium weight cold rolled steel of 100 mm size and fixed ,complete all as specified and directed by the Engineer-in-Charge.

S&F, Aluminum alloy, anodized, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) complete all as specified and directed by the Engineer-in-Charge.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/ Aluminium windows, or Stainless steel wire staples complete all as specified and directed by the Engineer-in-Charge.

M&L, Preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed by Engineer-in-Charge.

M&L, Preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified and directed by Engineer-in-Charge.

Dismantling structural steel work in including doors, gates ,angles but excluding framed truss etc complete all as specified and directed by Engineer-in-Charge.

S & F Fancy type Stainless steel 25 mm dia Drapery rod with all fittings including making the disturbed good as per existing specification,as in repair with fancy type brackets and knobs for curtain rods, to fix on wall all fittings complete all as specified and directed by the Engineer-in-Charge. Note : Item includes the cost of fancy type brackets and knobs.

S&F, Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000 mm width and of weight between 61 to 80 kgs and fixed in repair, complete all as specified and directed by Engineer-in-Charge

S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty,including taking down old floor spring hydraulically, complete all as specified and as directed by Engineer-in-Charge.

Dismantling boarding, any description, fixed in any position with nail / Bidding etc complete all as specified and directed by the Engineer-in-Charge.

M&L for 18/19 mm thick Prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, both/all sides covered with 4 to 5 mm thick teak wood beading, fixed as in cupboard, arrangement to up down on required size complete all as specified and directed by the Engineer-in-Charge.

S&F 25-35 mm wide 2-3 mm thick rubber beading for aluminium /wooden door seal fixed to door shutter with nails/screws,etc and also easing of wooden door for easy opening and closing, as in repair, complete all as specified and directed by the Engineer-in-Charge.

S&F for Towel rail 600mm long brass chromium plated fixed as in repair complete all as specified and directed by the Engineer-in-Charge.

S & F in repairs floor door stopper of aluminum alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140 mm complete all as specified and directed by the Engineer-in-Charge.

Easing of aluminium windows/door shutters for closing /opening , including tightening of hinges , adjustment of floor door closer, sliding bolts with new screws etc , adjustment of handles , other miscellaneous adjustments complete all as specified and directed by the Engineer-in-Charge.

M&L for greasing all moving parts of rolling shutters gear operated rolling shutters exc 8 sqm but not exc 16 sqm of clear opening incl hood cover refixing the same and incl replacement of gear box assembly incl replacement of mild steel spring , ball bearing etc complete all as specified and directed by Engineer-in-Charge.

S & F in repair, Aluminium handles ,plate cast type anodised of 150 mm size complete all as specified and directed by the Engineer-in-Charge.

S & F in repair, Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm size, complete all as specified and directed by Engineer-in-Charge

S & F in repair, Butt hinges medium weight cold rolled steel of 100 mm size ,complete all as specified and directed by the Engineer-in-Charge.

S & F in repair, Aluminum alloy, anodized, sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16 mm dia with and including a minimum of 6 boltsfour on bolt plate and two on staple plate (ISI marked ) , complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and directed by the Engineer-in-Charge.

M&L, Plain cement concrete type B-1(1:2:4) using 20 mm graded stone aggregates as bed block ,coping , cills, steps etc, incl necessary formwork complete all as specified and directed by Engineer-in-Charge.

S&F, Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of EPDM rubber/ neoprene gasket required( fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS :1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws , complete all as specified and directed by the Engineer-in-Charge.

S&F, Powder coated Aluminium (minimum thickness of powder coating 50 micron) Window and Ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as pegstays 150 mm long(1 nos) hinges type B-21 100 mm long (2 nos) suitable handle (1 nos) complete all as specified and directed by the Engineer-in-Charge.

MAA BHAWANI CONSTRUCTION (BID ID -3075778)

RRR CONSTRUCTIONS (BID ID -3094925)

36SHRI RADHEY ASSOCIATES (BID ID -3093793)

High Tech Metal India (BID ID -3093566)

Singh Associates (BID ID -3093769)

M/S Ashoka Engineers and contractors (BID ID -3087553)