PROVN OF 09 NOS OF SOLAR WATER HEATERS ALONGWITH ELECTRICAL HEATING SYSTEM IN RAINY SEASON WITH A CAPACITY 1000 LITRES AT P 191,P 192 AND P 205 ,THE MLIRC UNDER GE BELGAUM

Amount

Supply, install, test and commissioning of Solar water heater with flat plate collecter type of capacity 1000 LPD confirming to IS 12976 latest standards with an electrical backup of not less than 6KW including electric back up control panel outdoor type consisting of MCBs, Amp and Voltmeter, incoming MCCB, thermostat for auto-cut and suitable contactors and necessary electric copper cabling as required. The solar absorber shall made up of copper sheets and copper tubes covered with toughened glass. The hot water tank shall be made up of 1.2mm thick stainless steel SS grade 304 or SS grade 316 duly insulated with high density 50mm thick PUF insulation mounted on MS angle iron frame work of size 35 mm x 35 mm x 4mm thick including all supports for flat plate collectors firmly grouted on the roof including suitable PCC with all accessories for installation to the entire satisfaction of Engr-in-charge complete all as specified and as directed. Note : Make-Racold/Tata Solar/V-Guard. (ISI MARKED) Note:- The contractor shall submit all required testing certificates, warranty certificates and specification of the manufacturer in prior for to commencement of the above work for approval of GE

Supply and fix white coloured Rotational moulded polyethylene storage water tank of 2000 Litres capacity ,Triple Layered ( Cylindrical vertical with close top ) hoisted and fixed in position including connecting with PVC pipes & fittings , PVC float ball valve complete all as specified and as directed.Note :Make :Sintex/Infra/Polycon (ISI MARKED

Supply and lay 40 mm outer dia 3 layer PP-R (Polypropylene randon copolymer) concealed pipes SDR 7.4 (PN16) UV Stabilized and antimicrobial fusion welded having thermal stability for Hot and Cold water supply including all PP-R plain and brass threaded polypropylene random fittings required for fixing on any type of wall and necessary fixing accessories. Make: Note:(i) The quoted rates shall include the cost of ladders/ scalf folding required for fixing at site of following sizes:-(ii) Make: SFMC/Supreme/vectus 40 mm outer dia

All as per Item No 3 above but of 25 mm outer dia

All as per Item No 3 above but of 20 mm outer dia

Supply and fix PP-R Ball Valve ( Brass insert) For 40mm outer dia pipe complete all as specified and as directed.Note: Make: SFMC/Supreme/vectus

Supply and fix PP-R Ball Valve ( Brass insert) For 25 mm outer dia pipe complete all as specified and as directed.Note: Make: SFMC/Supreme/vectus

Supply and fix 15 mm dia Bib tap ,cast copper alloy with crutch or Butterfly handle ,screwed for iron pipe or brass ferrule complete all as specified and as directed.Note: Make : Prayag/ESS ESS/Water man(ISI MARKED)

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 25 Sqmm, 4.0 core fixed to wall with necessary MS clamps compete all as specified and as directed. Note : ( Make of XLPE Cable : Gloster/Polycab/CCI

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 10.00 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 10.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 10.00sqmm and one run of 10.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/Havells (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix Factory made epoxy powder coated distribution board SPN 4ways double door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed on wall / sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts complete all as specified and as directed . Note :Make :Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Material and labour for fabricating Mild steel framed work such as grills,angles,gratings etc with end of bars/angle shouldered, welding/riveted,or forged into spikes,framed guard bars, barred iron doors, ladders , framed balusters, walk ways , railings,framework staging for water tank and similar work conforming to Fe.290. Gde-E-165 as per the design submitted complete all as specified and as directed.

Material and labour for Plain cement concrete M-20 grade (using 20mm graded stone aggregate) as inslabs supported on wall ,beams and columns in floors,roofs landing,balconies,canopies,deck slabs and in shelves and the like base framework water tank including necessary steel form workcomplete all as specified and as directed.

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

M/S JEELANI ELECTRICALS (BID ID -3139794)

M/s. VIJAY ELECTRICALS (BID ID -3139484)

DHAIRYASIL RAMAKANT DESAI (BID ID -3139709)