GE/C-31/2023-24 REPAIR TO CERTAIN FLOORING, PLUMBING, JOINERIES, SANITARY, ROOF SHEETS, PLASTERING INCLUDING REPAIR/ REPLACEMENT OF UNSERVICEABLE ELECTRICAL FITTINGS WITH LED LIGHT FITTING INCLUDING DISTRIBUTION BOARD, MCBs, MCCBs AND MISC E/M WORKS

Amount

Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc. all as directed.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed.

M &L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per Itr, water ratio 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr finished fair and even. Complete all as specified and directed by Engineer-in-Charge.

M &L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per Itr, water ratio 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr finished fair and even. Complete all as specified and directed by Engineer-in-Charge.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement incl scafolding etc, complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specifed as direted by Engr-in-charge.

M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.

M&L preparing newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling including pilasters and cornices etc , brooming down, etc and applying one coat of white washing complete all as specified and as directed.

M&L for old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all a spcefied.

M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint complete all as specified and as directed.

M & L for preparation of old plastered surfaces of walls removal of surfaceing of existing layered of paint an and applying two coat of exterior emulsion acrylic weather coat paint (Apex) one coat of primer complete all as specified and directed.

Dismantling of wall and ceiling board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work.

M & L for snap grid ceiling with E - board ceiling tiles of size 600x600mm 4mm thick incl aluminium alloy anodised at edges angle 25x25x1.5mm and tee section 38x38x1.5 mm at other than edges both ways fixed with 4mm dia gi wire including two coats of oil bound distemper.

S&F for 19/20mm thick Block board grade 2 quality interrior grade commercial type fixed with screws to timber frame work including teak wood leaping and necessary rebating for double shutter where required (Note : teak wood leaping shall be measured and paid separatly).

Supply only butt hinges medium weight stainless steel 75mm size Complete all as specified and directed by Engineer-in-Charge.

S&F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel, bright finished.

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame).

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame).

Taking down shutters of any discription exceeding 1 sqm each and not exceeding 2 sqm each.

M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as spd.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet single rebates of size 105x60mm for doors, ventilator including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b).

S&F 30MM thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.

M & L for 35 mm thick factory made 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F Steel window (Factory made) double rebate, with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 complete all as specified.

S&F Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Supply and fix MS butt hinges medium weight 100 mm size fixed with MS screws.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, roof truss and similar work con- forming to Fe.290.Gde-E-165

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windowos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted glass/frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed.

M&L for aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44045 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm incl as durected and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required incl handle ,tower bolt ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.

Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.

S&F in repairs stainless steel plate rack of size 90x80x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.

S&F stainless steel sink with drainage board made out of 0.80mm thick sheet for kitchen with plug, washers, waste pipe incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.

Material and labour for welding in repairs not exc 2.5 cm in length complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

S & F in repairs 15 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

S & F in repairs 20 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified.

Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge.

S & F in repairs floor mounted EWC incl all necessary fittings complete all as specified and directed by Engr -in-charge. Note:- Cistern and seat cover paid seperatly..

Supply and fix in repairs PVC low level white flushing cistern valveless syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified.

S&F in repairs PVC waste pipe 32 mm dia for wash hand basin complete all as specified

S & F in repairs 32mm dia sink waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S & F in repair 15 mm dia 600mm long PVC connections with brass check nut complete.

S & F in repair Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

S&F in repair CP jet spray for EWC with flexible pipe and angle cock/stop cock complete all as specified.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&Fin repairs shower rose, chromium plated brass, fancy type, 100x100 mm, with or without swivel , any size, including fixing to steel pipe or union, complete all as directed.

S&Fin repairs 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device.

S&F in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold complete all as specified.

S&F in repairs of 15mm bore size PVC PTMT bib tap complete all as specified.

S & Fixed in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified.

S&F in repair stainless steel gratings 100mm bore size fixed with cement motar.

S&F in repair toilet paper holder fixed to wall with chromium plated brass screws and rawl/phil plugs complete all as directed all as ppecified .

S&F in repairs chromium plated soap dish fancy type all directed. complete all as directed all as ppecified .

S & F in repair towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.

S & F in repair 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO)of as all specifed and as directed. Code SOL-6281

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M&L for Non - skid Ceramiccolour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

S&F Non - skid Ceramic colour tiles 600 x100 x 7 to 8 mm thick in vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for 18 -20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F Cequered cement concrete tiles with grey cement and pigment 30cm X30cm X20mm thick set jointed and pointed in neat cement slurry in floors and including 75mm thick cement concrete type D-2 1:4:8 and incl 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 60mm thick M-35 grade any shape and size with grey cement and pigment including 75mm thick cement concrete type D-2 1:4:8 complete all as specified and as directed.

M&L for sand filling under floor or in foundations including watering and consolidation

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt.

Dismentling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete .

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges/gutter to wall, fixed with self tapping screws as specified.

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level).

M&L for cement concrete 40mm thick type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in floor for fair finished surfaces of concrete complete all as specified and directed.

M&L for cement concrete 75mm thicktype C-2 1:3:6 (40mm graded aggregate)as in plinth protection and paths laid in alternative panel.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.

M&L providing precast cement concrete 1:2:4 Type B-0 12.5 mm graded agg. In precast coppings incl slightly rounded chemered angles and throating including necessary form work complete.

Material and labour for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triplr layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

Material and labour for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.

S & F 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed

S & F 75 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed

S&F in repair PVC (SWR) bends any radius, 110 mm bore complete.

S&F in repair 100 mm bore cast iron bends complete all as specified and as directed.

S&F in repair 75 mm bore cast iron bends complete all as specified and as directed.

S&F in repair aluminium extruded section Door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg complete all as specified.

Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc.

Taking down care fully copper/aluminium point wiring from wooden batten (except) conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded new metal flush box duly make embossed, concealed in walls with for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:-

(a) One light/Exh fan point controlled by one No one way switch

(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

(d) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

All as per item No 118 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board.

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 1.5 sqmm (nominal dia) FRLS 1100 Volts in existing PVC concealed conduit in new M S steel terminal boxes of wall thickness not less than 1.6mm including 3 mm thick laminated top sheet cover including using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth all as specified and directed by Engr-in-Charge.

(a) One light/Exh fan point controlled by one No one way switch

(b) One bell / buzzer point controlled by one bell push

(c) One light point controlled by two Nos two way switches

(d) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

(e) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm (nominal dia) FRLS 1100 Volts in existing PVC concealed conduit in new M S steel terminal boxes of wall thickness not less than 1.6 mm including 3 mm thick laminated top sheet cover including using 2.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one power point, all as specified and directed by Engr-in-Charge.

M&L in replacement switch piano flush button type single pole one way 6 Amps all as specified.

M&L in replacement switch piano 6 amp SP two way, ISI marked

M&L in replacement socket outlet 6 Amp flush button type all as specified.

M&L in replacement bell push single pole 6 Amps all as specified

M&L in replacement switch piano flush button type single pole 16 Amps.

M&L in replacement socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole .

M&L in replacement regulator electronic switch type 5 steps suitable for 1200/1400 mm sweep 230 volts all as specified and directed.

M&L in replacement bell electric (dingdong) 230 volt, SP all as specified and directed.

M/L in replacement insulated body, angle holder (metal ring) with back plate ISI marked complete all as directed.

S&F ceiling rose surface PVC 65x50 mm type with three terminals.

M&L in replacement Modular switch outlet 5 pin 6 Amp socket 2 module complete all as specified.

M&L in replacement Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified.

M&L in replacement switch Modular type 16 Amps one way, 1 module, 230V AC complete all as specified.

M&L in replacement Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.

M&L in replacement Modular five stepped type electronic fan regulator 120W, 2 module 230V AC complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. (Mirror light)

Supply and fix LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

supply and fix recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed.

S&F in replacement of decorative type (Comet) wall mounted luminaire with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base.

Supply and Fixing LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base.

Supply and Fixing LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base.

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix in repair MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting .

Supply and fix in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply and fix in repair MCB DP 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply and fix in repair MCB SPN 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S &F exhaust fan 300 mm in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site.

Supply and fixing in replacement Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmmincluding writing MES NO. 2 CM height with synthetic enamelled black paint complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.

Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls all as specified and as directed.

Supply and fix in repair Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories(Surface) in walls all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints including excavation and earth work, GI pipe light grade 15mm bore for protection of G.I. wire from earth electrode to the Main switch/Distr Board, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 using 20mm graded stone aggregate chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, round, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed.

Cutting the existing wall/removing existing steel bar to make a hole for fixing of exhaust fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl make good of disturbed surface complete all as directed by Engr-in charge.

Supply and Fix in repair 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

Supply & Fix in repair only swich & socket combined 5 pin 6 Amp, all as specified and directed by Engr-in-Charge.

Supply & Fix in repair only swich & socket combined 5 pin 16 Amp, , all as specified and directed by Engr-in-Charge.

Supply and fix in repair hylum sheets 3 mm thick (ISI marked) of the following sizes :-

(a) Sheet 4" x 4" single cutting suitable for one piano switch

(b) Sheet 4" x 4" two cuttings suitable for two piano switches

(c) Sheet 4" x 7" three cuttings suitable for three piano switches

(d) Sheet 4" x 7" one cutting for 6 Amp socket and two cuttings for piano switches

(e) Sheet 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

(f) Sheet 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

M & L for in replacement only single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

M & L in replacement for only single core PVC insulated cable 2.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

M&L in replacement copper cable flexible 3 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge.

M&L in replacement copper cable flexible 3 core PVC insulated of size 40/.0076 ll as specified and directed by Engr-in-Charge.

S & F in replacement hole fastner madeup of MS 6" long with complete nut bolt all as specified.

S & F in replacement hole fastner madeup of MS 4" long with complete nut bolt all as specified.

S&F in replacement GI Pipe bracket bent to shape drilled welded made out of light grade GI pipe 32mm dia 1.5 mtr long and fixing on the wall where as directed by the Engr-in-Charge for fixing of building security light fitting including clamps, nuts, bolts and washers complete all as specified by the Engr-in-Charge

Supply & fix in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300/ 250 mm size exhaust fan complete all as directed.

Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only.

Supply only base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed.

S&F of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed.

S&F heating element of 2 KW triangular type with nut bolt washer complete all as directed.

M & L non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed.

M&L for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed.

Supply only inner still tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed.

M&L in replacement MODULAR type sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 20Amps complete with one single pole MCB 'C' series 20 A capacity all as specified and directed.

S &F in replacement Wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site.

Supply and fix ijn replacement surface ceiling mounted, LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed by Engr-in-charge.

S &F in replacement 12 MODULE plate suitable for modular switch and socket in white colour.

S &F in replacement 8 MODULE plate suitable for modular switch and socket in white colour.

S &F in replacement 6 MODULE plate suitable for modular switch and socket in white colour.

S &F in replacement 4 MODULE plate suitable for modular switch and socket in white colour.

S &F in replacement 3 MODULE plate suitable for modular switch and socket in white colour.

Supply and fix in replacement 100 W high efficient led flood light with pressure die cast LM6 aluminium housing and has lenses specially designed for street lightwith polycarbonate cover.system level efficiency of the luminare is 100lm/W with a lifetime of 50000 burning hours at L70. with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.9, THD< 20%, colour temperature - 6500K, surge protection 4KV in CM, IP-66 protected with IK05 impact resistance, Short circuit and over circuit protection, voltage range - 120 to 270 Volts AC, for fixing the light fittings on wall fixedeincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F in replacement DOL starter suitable for 05 HP, 3 phase, 415 Volts booster pump with all connection upto the satisfaction of Engr-in-charge all spesified and directed.

Taking out old burnt winding of HIGH PRESSURE VEHICLE WASHING PUMP MOTOR 5/10 HP and rewinding with super enameled copper winding wire of suitable size and existing gauge incl insulation materials such as insulating paper sleeves, varnishing and drying with blower incl transportation of motors from various washing point to workshop and back, refixing at site and reconnecting all electric connection and testing on full load complete all as specified and directed.

S&F in repairs washing pipe with brass gun metal male and female ends, connected with one nozzle, with safety box, every box having washing pipe (one set) minimum 20m long each pipe, complete all as specified and directed.

M & L for servicing of AC induction motor with high pressurepump set and re-install same after painting the pump including the pipe connected to its at inlet & outlet inside the pume house complete, overhauling / Repair of complete pumpset of 5 HP capacitywith suitable size single phase electric motor coupled to pump with V belt and pulley incluiding common iron frame Including disconnection of electric & water connections and transportation to workshop if required as per site after replacement of below mentioned spare will be measured and paid separately complete all as specified and directed by Engr in charge.

Bearing Size suitable for as per sample.

Bearing cover

Gland packing of size 8x8mm.

Grease white .

cuppling for motor with pump set complete set as per sample

Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and maintenance work complete on all working days including holidays all as directed by Engr-in-charge.

Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etc complete all as specified and directed. Notes for Item No. 198 and 199 (a) Supply only spares shall be measured and paid under relevant item of Sch 'A'/ BOQ (b) Contractors are advised to visit the sites before quoting their rates. (c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (d) Contractor shall provide and deploy adequate experienced Exp. professional to carry out day to day complaints and tradesman will remain present in mention area Complainet Cell from 0830Hrs to 1800 Hrs from Monday to Sunday (01 Electrcian & 01 Helper) . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account.Note:whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. (e) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 8 hours.

Taking down sub main wiring off sizes etc complete all as specified and directed.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

Supply only replacement of modular box type single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply only replacement of single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 10 Amp complete all as specified and directed.

Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

Supply only replacement of capacitor 2.5 Mfd, 240 V complete all as specified and directed.

Supply only relacement plug top 16 Amps 3 pin 230- voltS.

Supply only replacement of MCCB 160 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified directed.

Supply only replacement of in repair MCB DP 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Schedule of Credit

M/S ANIL KUMAR

LAMBA ENTERPRISES

imran construction company

MODERN CONCEPT CONSTRUCTIONS

a.k constructions