Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC 186 GANDHI MARKET AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹7.7 L+₹48,935 (6.81%)Rejected-AOC 58 3 JUTOGH CANTT SHIMLA 08 HP | SHIMLA | HIMACHAL PRADESH | 171001 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹8.0 L+₹78,376 (10.9%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder | |
| 4 | L4₹8.5 L+₹1.3 L (18.2%)Rejected-AOC | L4 | Rejected-AOC Other than the lowest bidder | |
| 5 | L5₹9.3 L+₹2.2 L (30.0%)Rejected-AOC FLAT NO 4 C GH 39 MANSA DEVI COMPLEX SECTOR 05 PANCHKULA 134 109 HRY | PANCHKULA | PANCHKULA | HARYANA | 134109 | L5 | Rejected-AOC Other than the lowest bidder |
Tender Value
Refer Docs
EMD Value
₹28,500
Closing Date
29 Jul 2021, 6:00 pmClosed
GE JUTOGH
GE JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
SPECIAL REPAIR TO INTERNAL ELECTRIC SUPPLY OF BLDG NO RH-43 TO RH-47 AT ASCON UNDER GE JUTOGH
2021_MES_456369_1
GE/JUT-19 OF 2021-22
Open Tender
Civil Works
Item Rate
180 days
JUTOGH
CLASS E CATEGORY b (i)
6 documents required · 6 mandatory
₹500
GE JUTOGH
₹28,500
Yes
17 Aug 2021
1 Jul 2021
31 Jul 2021
1 Jul 2021
29 Jul 2021
15 Jul 2021
Amount
Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface complete all as specified and directed.
M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly incl making good disturbed surface as per existing complete all as specified and directed. Note: Cost of making good disturbed surface as per existing deemed to be included in quoted rates.
All as per Srl item No 02.00 above but for one 3/5 pin socket 5 Amp on same board.with 1.5 sqmm wire with 1.5sqmm earth wire complete all as specified and directed
All as per Srl item No 02.00 above but for one 3/5 pin socket 5 Amp on independent board.with 2.5 sqmm wire with 2.5 sqmm earth wire complete all as specified and directed
All as per Srl item No 02.00 above but for one 3/5 pin socket 5 Amp on independent board but below the switch board of light points in the same vertical plane with 2.5 sqmm wire with 2.5 sqmm earth wire complete all as specified and directed
All as per Srl item No 02.00 above but for 3/5 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4 sqmm complete all as specified and directed.
M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC concealed conduit 25mm dia with all fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly incl making good disturbed surface as per existing complete all as specified and directed. Note: Cost of cutting chases and making good disturbed surface as per existing deemed to be included in quoted rates.
All as per Srl item No 07.00 above but for one 3/5 pin socket 5 Amp on same board.with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed
All as per Srl item No 07.00 above but for one 3/5 pin socket 5 Amp on independent board.with 2.5 sqmm wire with 2.5 sqmm earth wire complete all as specified and directed
All as per Srl item No 07.00 above but for one 3/5 pin socket 5 Amp on independent board but below the switch board of light points in the same vertical plane with 2.5 sqmm wire with 2.5 sqmm earth wire complete all as specified and directed
All as per Srl item No 07.00 above but for 3/5 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4 sqmm complete all as specified and directed.
S&F switch piano flush type/Bell push, 5 Amps, single pole one way 230 V , AC complete all as specified and directed
S&F socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 V , AC complete all as specified and directed
S&F socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed.
S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.
S&F ceiling rose, surface backlite, 65x50mm, three terminals complete all as specified and directed.
S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp with and incl LED Bulbs 9/10W B-22 Pin type, 230 Volts , AC complete all as specified and directed.
S&F Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings incl taking down old unserviceable light fittings of any type and any size complete all as specified and directed. Make : BAJAJ cat part no:BCTBLR 36W LED/ Havells cat part no: PLUTONEO2X2PLR34WLED857S/ CG cat part no : LCTLRN-36-FO-CDL .
S & F LED tube light fittings 20W (4 feet,5700K) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings incl taking down old unserviceable light fittings of any type and any size complete all as specified and directed. Make: BAJAJ cat part no:BCLSB 20 WH/ Havells cat part no: LUMILINEBS20WLED865SPCWH/ CG cat part no : LCTL-18-CDL
S&F in repairs LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed. Make :- BAJAJ cat part no:BCLSB 10 W/ Havells cat part no:LUMILINEBS9WLED865SPCWH/ CG cat part no : LCTL-9-CDL
S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightining source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings incl taking down old unserviceable light fittings of any type and any size complete all as specified and directed. Make : BAJAJ cat part no:BCLST 25W LED I V2/ Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP/ CG cat part no : LSTS-25-CDL
M&L for submain wiring with 2X10 Sqmm+1X6.00 Sqmm earth wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly drwan in and including heavy duty PVC concealed conduit 25mm dia incl dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note: (i) Two run of 10sqmm and 1 Run of 6sqmm wire and 1 Run of PVC conduit shall be measured as One RM. (ii) Cost of cutting chases and making good disturbed surface as per existing deemed to be included in quoted rates.
M&L for submain wiring with 2X16 Sqmm +1X10.00 Sqmm earth wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed conduit 25mm dia incl dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note: Two run of 16sqmm and 1 Run of 10sqmm wire and 1 Run of PVC conduit shall be measured as One RM. (ii) Cost of cutting chases and making good disturbed surface as per existing deemed to be included in quoted rates.
S&F distribution board 6 way TP&N double door, fitted with bus bars, neutral links suitable for 415V, 50Hz, blanking plates, suitable for TP/FP MCB incl taking down existing unserviceable TPN DBs complete all as specified and directed.
S&F MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps with suitable arrangement of fixing overvoltage relay incl connection complete all as specified and directed.
S&F overvoltage relay 230 V AC, U>275 V AC, 3 Phase in 1 module suitable for 3 Ph+N incl complete connection and fixing with MCB complete all as specified and directed. Make: Hager Cat Part No. MZ 216 or equivalent in Havells/ ABB/ L&T/ CG/ Legrand/ Scheinder. Note: (i) MCB four pole will be measured and paid separately under relevant item.
S&F MCB TPN 63 to 100 Amps 415V incl all termnials, fitting etc incl taking down complete all as specified and directed.
S & F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link, earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways concealed in wall including taking down old unserviceable DB's complete all as specified and directed.
S&F RCBOs for earth leakage, over load & short circuit protection 4 pole ,40 Amp rating, 300mA capacity suitable for 240 Volts and including taking down old unserviceable MCB/ RCBOs complete all as specified and directed.
S&F in repairs MCB SPN 40 / 63 Amps 240V, 10 KA with suitable arrangement of connecting overvoltage relay including all termnials fitting complete and all as specified and directed.
S&F in repairs MCB SP 06 to 40 Amps 240V, 10 KA including all termnials fitting complete and all as specified and directed.
S&F in repairs overvoltage relay 230 V AC, U>275 V AC, Single phase in 1 module suitable for 1Ph+N incl complete connection and fixing with MCB complete all as specified and directed. Make: Hager Cat Part No. MZ 209 or equivalent in Havells/ ABB/ L&T/ CG/ Legrand/ Scheinder. Note: (i) MCB SPN will be measured and paid separately under relevant item. (ii) Make of MCB SPN will be Same as overvoltage relay
S & F exhaust fans of size 280/300mm sweep 900 RPM 230V AC (Heavy duty ) MS body incl blade with louver shutter with fastner nut bolts washer etc complete including electrical connection with copper cable from ceiling rose to exhaust fan including taking down old exhaust fan and deposit to MES Store Yard without extra cost complete all as specified and directed.
S & F electronic fan regulator step type, 230V, AC, complete all as specified and directed.
M & L for earthing complete with copper plate 60x60x3.15 mm thick electrode and 20x3mm copper strip as earthing lead directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.
M & L for prepration of old treated surface of wall and applying two coats of oil emulsion distemper over and incl wall care putty complete all as specified and directed.
M/S JOHN VASSELLY
CHADHA ENGINEERS
M/S Jaswant Kumar Aggarwal
Babu Ram Sud and Sons
The Rahul Vig
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .