85812SPECIAL REPAIRS TO CERTAIN INTERNAL ROADS AT MINTSD UNDER GE SOUTH PUNE.

Amount

M&L for repairs to pot holes exceeding 30 mm depth and not exceeding 1.00 sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by applying a tack coat with bitumen primer(VG-10) @ 5 Kg per 10 Sqm, putting in premixed bitumenous semidense concrete (design mix), 25 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, laid with mechanical paver, rolled & compacted in required gradient and camber with 8 to 12 ton power roller complete all as specified and as directed

M&L for Premix bituminous macadam (consolidated thickness 75 mm) with 4 % binder content by weight of total mix using bitumen VG-30 laid, rolled and compacted to required gradient and camber with 8 to 10 tonne capacity power roller by using hot mix plant & mechanical paver complete all as specified and as directed.

M&L for preparing existing black top surfaces of road or surface of WBM with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen primer 80/100 grade @ 2.5 kg per 10 sqm and providing and laying bituminous premixed semi dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix , rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and as directed. Note : Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.

M&L for preparation of black top surfaces of road and applying 2 mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm width, by mechanical machine, white or golden yellow complete all as specified and as directed.

Demolition of cement concrete in ground flooors and paving n exc 15 cm (below or above ground level) complete all as directed.

Demolition of brick /stone masonry built in cement mortar complete all as directed.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking paver block, any shape and size as approved , 60 mm thick, conforming to IS 15658-2006, M-35 grade, glossy finish as in floor/ pavement laid over 25 mm thick stone dust cushioning, laid dry to the profile over subbase / hardcore filling complete all as directed by Engineer-in-Charge.

M&L for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping, edging etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and as directed.

R K Enterprises

Aadarsh Construction