SUPPLY & ERECTION OF MACHINERIES & EQUIPMENTS OF HONNAVARA ICEPLANT

Kirloskar KC X -4 ammonia compressor with Flywheel, Motor Pulley and Gauges cum control panel comprising of LP, HP & OP cutouts with necessary internal wirings with KRMS Panel

Siemens 100 HP make TEFC Sq. cage induction motor suitable for operation on 400/440 volts, 3 phase, 50 cycles, 1500 rpm, AC Supply, IE-3 with roller bearing.

Necessary suction line and accumulator insulation

Oil separator made from M.S Plate Dia 20 inch X 36 inch long with Inlet & Outlet connection

Ammonia receiver of size is 27 inch dia X 21inch long with liquid inlet and Outlet, safety, purge, charging & gauge Glass connection

Refrigeration trunk coils made from 32 mm(1.25 inch) seamless heavy pipe, containing 1900 Rft. of pipe length with header and accumulator of suitable Size.

Atmospheric type ammonia condenser each having a single row of 2 pipes height x 6.1 m(20) long constructed of 50mm(2inch ) G.I C Class TATA make pipewith liquid, gas Headers

Ammonia Valves and Fittings

vertical20 inch Dia brine agitators, with V-belts and motor pulley.

Siemens 3HP reputed indigenous made squirrel cage induction motor for the agitator, suitable for the operation on 400/440 volts, 3 phase, 50 Cycles, 960 rpm IE-2.

Condenser 3HP water circulating pumps set with suitable motor for operation on 400/440 volts, 3 phase, 50 cycles

Ice Cans size 8 inch x 22inch x 48 inch made out of TATA sheet 16 gauge Galvanized iron sheet of each 100 Kg (220 LBS) Capacity.

Damper for tilting 4 Nos of Ice can each with stand and wood fixing

Set of MS heavy duty C-class Ammonia pipe & fittings for the complete Palnt as per our design and based on a close hook-up of the equipment

First charge of brine

Panel board cubical type along with Electrical wiring material for power wirings, control wirings and earthings etc., However it may be noted that the mail electrical connection has to be terminated a...

First charge of ammonia gas, compressor oil for commissioning of the Ice Plant

Complete erection of the Plant including testing and putting the same into Operation