REPAIR/MAINTENANCE AND PAINTING OF STEEL FURNITURE UNDER GE(I) KANPUR

Amount

Charpoy GI pipe with Ply top, FD- 220A

Taking out old unserviceable ply top from charpoy GI pipe & S&F New ply wood top of size 1970x890mm & 12 mm thick commercial ply top BWR grade (Make of Ply: GREEN PLY/CENTURY/ARCHID ) fixed to charpoy with help of 10 Nos 6mm x 75mm long GI nut & bolts and washer as directed by Engineer-in-Charge.

Taking out old unserviceable stiffiner from charpoy GI pipe and S& F MS flat iron stiffner size 40mm x4mm x836mm long two number fixed on long rail with equal distance using GI nut & bolts of size 6mm x75mm long to facilitate fixing to plywood in charpoy complete and all iron work duly painted with two coats black paint over a coat of red oxide primer all as specified and directed by Engineer-in-Charge.

S & fixing the new long Rail made of medium grade GI pipe 32 mm bore/dia thick (in replacement of old U/S long rail) of size 1890 mm long duly threaded on both ends all as specified in drg directed by Engineer-in-Charge.

Fixing only short rail made out of dismantled long rail of size 900 mm long duly threaded on both ends all as specified in drg directed by Engineer-in-Charge.

Fixing only legs rail made out of dismantled short rail duly threaded on both ends & providing with 2 parallel MNF clamp made out of FI of size 25mm x 3 mm holding for 19 mm dia conduit pipe complete as specified in drg and directed by Engineer-in-Charge.

S&F new Three way Elbow ( in replacement of old U/S elbow) 32 mm dia GI ISI marked complete all as specified in drg and directed by Engineer-in-Charge.

S&F new check nut ( in replacement of old U/S Chucknut) 32 mm dia complete all as specified in drg and directed by Engineer-in-Charge.

Almirah Large Steel /Almirah Medium Steel /Almirah 1/2 H X 1/2 S FD-67(M),114,351,339,1031,350,1032.

Taking out unsv Handle of AlmirahLarge Steel /Almirah Medium Steel / Almirah 1/2 H X 1/2 S and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv Lock of AlmirahLarge Steel /Almirah Medium Steel/ Almirah 1/2 H X 1/2 S and S&F New Lock with 02 Nos Key fixing with Screw/welding complete as per existing shape ,size and as per Drg. Make :- Godrej/Link/Harrison/national

Taking out unsv Butt Hinges of AlmirahLarge Steel /Almirah Medium Steel / Almirah 1/2 H X 1/2 S and S&F New Butt Hinges fixing with Hinges pin/welding complete all as per existing shape ,size and as per Drg.

Taking out unsv /Rusted Legs of Almirah Large Steel /Almirah Medium Steel/ Almirah 1/2 H X 1/2 S and S&F New Legs duly Painted with two coats OG paint over a coat of red oxide primer fixing with welding complete as per existing shape ,size and as per Drg.

Taking out unsv /Rusted Shelves of AlmirahLarge Steel /Almirah 1/2 H x 1/2 S and S&F New Shelves duly painted with two coats synthetic enamel Olive Green paint over a coat of red oxide primer fixing with MS clamp/MS Cilp/rivet complete as per existing shape ,size and as per Drg.

Taking out unsv /Rusted Shelves of Almirah Med Steel /Almirah med 1/2 H x 1/2 S and S&F New Shelves duly Painted with two coats synthetic enamel Olive Green paint over a coat of red oxide primer fixing with MS clamp/MS clip/Rivet complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New MS clamps/ MS clips after removing the old unsv MS clamps/MS clips as per existing shape,size and as per drg.

Taking out old unsv/rusted threeway locking device and S&F new locking device duly Painted with two coats synthetic enamel Olive Green paint over a coat of red oxide primer complete as per existing shape,size and as per drg.

Taking out old unsv Lock cover and S&F new lock cover inside of Almirah duly Painted with two coats synthetic enamel Olive Green paint over a coat of red oxide primer as per existing shape,size and as per drg.

Taking out unsv /Rusted Shutter of Almirah Large Steel and S&F New shutter duly Painted with two coats synthetic enamel Olive Green paint over a coat of red oxide primer complete as per existing shape ,size and as per Drg.

All as per item Sl No 2.10 here-in-before -do- but almirah Med steel

Chair CB Steel With Arms FD-75(M)

Taking out old unsv Seat and S&F New SeatTeak Wood fixing with MS screw complete as per Drg

Taking out old unsv Back and S&F New Back Teak wood fixing with MS screw complete as per Drg

Taking out old unsv Arms handle & S&F New Arms handle of Teakwood duly painted with two coats of synthetic enamel black Paint fixing with MS screw complete as per Drg.

Taking out old unsv 20x3mm Flat iron strip and S&F new MS Flat iron strip of size 535x20x3mm (qty 02 number) duly Painted with two coats black paint over a coat of red oxide primer as in support to seat of Chair as per Drg.

Taking out old unsv hard Rubber/PVC Shoes and S&F new Hard rubber /PVC shoes as per Drg.

Taking out old unsv pvc cap and S&F new PVC cap as per Drg.

After repairing, preparatiion of surface including rusted portion of Chair CB steel with arms by scrubbing with sand paper applying two coat of synthetic enamel OG paint on steel portion as specified and directed by Engineer-in-Charge .

Chair CB Steel Without Arms FD-75(M)

Taking out old unsv Seat and S&F New Seat Teak Wood fixing with MS screw complete as per Drg.

Taking out old unsv Back and S&F New Back Teak wood fixing with MS screw complete as per Drg

Taking out old unsv 20x3mm Flat iron strip and S&F new MS Flat iron strip of size 530x20x3mm (qty 02 number) duly Painted with two coats black paint over a coat of red oxide primer as in support to seat of Chair as per Drg.

Taking out old unsv hard Rubber/PVC Shoes and S&F new hard rubber /PVC shoes as per Drg.

Taking out old unsv pvc cap and S&F new PVC cap as per Drg.

After repairing, preparatiion of surface including rusted portion of Chair CB steel with out arms by scrubbing with sand paper applying two coat of synthetic enamel OG paint on steel portion as specified and directed by Engineer-in-Charge .

Table 3'X2' with/ without drawer steel FD-283,1008,223,310,1007

Taking out unserviceable top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two sides it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.

Taking out unserviceable legs and S&F new legs of mild steel square tube 25 mm duly Painted with two coats Synthetic enamel OG paint over a coat of red oxide primer complete all as per existing shape and size.

Taking out unserviceable stiffener and S&F of new stiffener of mild steel square tube 25 mm duly Painted with two coats Synthetic enamel OG paint over a coat of red oxide primer complete all as per existing shape and size.

Taking out of unserviceable drawer and S&F of new drawer of mild steel square tube 25 mm as per existing shape and size complete all as per Drg.Drawer shall be made to move on Telescopic channel make-Ebco/Hettich.

Taking out unserviceable Lock of drawer and S&F of new lock and fixing with MS screw complete all as per drg.

Taking out old unserviceable shoes/toes and S&F of new hard rubber/PVC shoes toes as per drg.

After repairing, preparation of surface including rusted portion of Table 3'x2'with/without drawer steel by scrubbing with sand paper applying two coats of synthetic enamel OG paint on steel portion as specified and directed by Engineer-in-Charge .

Chair Visitor/Chair steel with cushion/Chair computer TP Taking down and removing of old unserviceable materials i.e foam and cloth velvet etc from seat and back from Chair Visitor/Chair steel with cushion/Chair computer TP and supply and fixed 12mm th hot pressed ply wood upholstered with fabric and moulded polyurethane form seat and back of Chair Visitor/Chair with cushion with change of new tapestry, of best Quality as approvled by GE with foam cushion shape/size/pattern as per old existing seat and back complete all as specified and directed by Engineer-in-Charge FD No-TP

Taking down and removing old unserviceable Arms from Chair Visitor/Chair steel with cushion/Chair computer TP and supply and fixing of new black integral skin polyurethane reinforced with MS insert it shall be scratch and weather resistant of Chair Visito/Chair with cushion (writing steel ) complete all as specified and directed by Engineer-in-Charge FD No-TP

Replacement of seat base including gas welding of Chair Visitor/Chair steel with cushion/Chair computer TP all as specified and directed by Engineer-in-Charge FD No-TP

M&L of two coat of enamel paint to be match as per old/existing colour will be provided after making smooth surfaces of the steel frame complete of Chair Visitor/Chair steel with cushion/Chair computer TP all as specified and directed by Engineer-in-Charge FD No-TP

Chair Revolving executives high back TP Taking down and removing of old unserviceable materials i.e foam and cloth velvet etc from seat/back from chair revolving High Back and supply and fixing 12mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane form seat and back of chair revolving High Back with change of new tapestry, of best quality as approved by GE with foam cushion shape/size/pattern as per old existing seat and back complete all as specified and directed by Engineer-in-Charge FD No-TP

Taking down and removing of old unserviceable wheels from chair revolving High Back and supply and fixing of new wheels as required type (i.e push or thread type) of chair revolving High Back complete all as specified and directed by Engineer-in-Charge FD No-TP

Taking down and removing of old unserviceable Hydraulic from chair revolving High Back and supply and fixing of new Hydraulic of chair revolving High Back complete all as specified and directed by Engineer-in-Charge FD No-TP

Taking down and removing of old unserviceable PU Arms from chair revolving High Back and supply and fixing of new black integral skin polyurethane reinforced with MS insert it shall be scratch and weather resistant of chair revolving High Back complete all as specified and directed by Engineer-in-Charge FD No-TP

Replacement of seat base including gas welding of chair revolving High Back, all as specified and directed by Engineer-in-Charge FD No-TP

M&L of two coat of enamel paint to be match as per old/existing colour will be provided after making smooth surfaces of the steel frame complete all of chair revolving High Back as specified and directed by Engineer-in-Charge FD No-TP

Table office Clerk Steel FD-84(M),381,307,1104

Taking out unsv Top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two sides it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.

Taking out of unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Taking out of unsv Drawer and S&F new Drawer of mild steel square tube 25 mm as per existing shape and size. Drawer shall be made to move on Telescopic channel make-Ebco/Hettich.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg make - Godreg/Harrison.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes/ Toes as per Drg.

After repairing, preparation of surface including rusted portion of Table office clk steel by scrubbing with sand paper applying two coats of synthetic enamel OG paint over a coat of red oxide on steel portion as specified and directed by Engineer-in-Charge .

Table office officer steel FD- 84(M), 1002,1003

Taking out unsv Top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two sides it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.

Taking out of unsv Legs and S&F new Legs of mild steel squire tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel squire tube 25 mm as per existing shape and size.

Taking out unsv Drawer and S&F new Drawer of mild steel squire tube 25 mm as per existing shape and size. Drawer shall be made to move on Telescopic channel make-Ebco/Hettich.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg. Make- Godreg/Harrison

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg.

After repairing, preparation of surface including rusted portion of Table office Officers steel by scrubbing with sand paper applying two coats of synthetic enamel OG paint on steel portion as specified and directed by Engineer-in-Charge .

Table Dinning OR's with SunmicaTop FD-165(M)

Taking out unsv Top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two sides it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.

Taking out of unserviceable legs and S&F of new legs of mild steel square tube as per existing shape and size.

Taking out unserviceable stiffener and S&F of new stiffener of mild steel square tube as per existing shape and size.

Taking out old unserviceable shoes/toes and S&F of new hard rubber/PVC shoes/ toes as per drg.

After repairing, preparation of surface including rusted portion of Table dining ORs by scrubbing with sand paper applying two coats of synthetic enamel OG/Black paint over a coat of red oxide on steel portion as specified and directed by Engineer-in-Charge .

Teapoy Verandah - FD-35,208,255

Taking out unsv Top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two sides it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.

Taking out old unserviceable legs and S&F of new legs of 20 mm dia MS conduit pipe as per drg.

Taking out old unserviceable frame and S&F of new frame of 25mmx03mm flat iron as per drg.

Taking out old unserviceable shoes/toes and S&F of new hard rubber/PVC shoes toes as per drg

After repairing, preparation of surface including rusted portion of Chair verandah by scrubbing with sand paper applying two coats of synthetic enamel white paint on steel portion as specified and directed by Engineer-in-Charge .

Tuck Welding

M&L for Tuck welding not exceeding 6 mm thick for joining the Broken Parts of steel Furniture specified all as Directed by Engr -in- Charge.

Chair Verandah FD-256:M&L for cutting unserviceable legs from the chair and S&F new legs, joints of chairs with required size and shape of conduit pipe of 16 gauge 19/20mm dia with welding the same to the chair as specified and shown in drawing and as directed by the Engr-in-charge.

M&L for applying two coats of white synthetic enamel paint to the frame of chair after preparation of surface and as directed by the Engr-in-charge.

M&L for cutting unserviceable cane from the chair and reacanning of chair verandah with hand including 3.5mm wide 0.5mm thick half round polyethylene cane of approved quality by GE all as specified and shown in drawing and as directed by the Engr-in-Charge.

M&L for fixing PVC shoes to chair varandah after removing old unserviceable ones as specified and shown in drg and as directed by Engr-in-Charge

Locker Bed side Steel 1/2 H X 1/2 S FD-1029

Taking out unsv Handle of Locker Bed side steel 1/2 H X 1/2 S and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out unsv Lock of Locker Bed side steel 1/2 H X 1/2 S and S&F New Lock with 02 Nos Key complete as per existing shape ,size and as per Drg. Make :- Godrej/Link/Harrison/national

Taking out unsv Butt Hinges of Locker Bed side steel 1/2 H X 1/2 S and S&F New Butt Hinges complete as per existing shape ,size and as per Drg.

Taking out unsv /Rusted Legs of Locker Bed side steel 1/2 H X 1/2 S and S&F New Legs dully Painted complete as per existing shape ,size and as per Drg.

Taking out unsv /Rusted Shelves of Locker Bed side steel 1/2 H x 1/2 S and S&F New Shelves dully Painted complete as per existing shape ,size and as per Drg.

Taking out old unsv/rusted threeway locking device and S&F new locking device complete as per existing shape,size and as per drg.

Taking out old unsv ,missing Lock cover and S&F new lock cover inside of Almirah as per existing shape,size and as per drg.

Taking out unsv /Rusted Shutter of Locker Bed side steel and S&F New shutter dully Painted complete as per existing shape ,size and as per Drg.

Painting: Painting of Almirah Large/Medium Steel,Almirah 1/2 H X 1/2 S,Book Shelf open large/small steel ,Locker bedside steel,Book case steel,Rack Adj steel, Rack 5/6 tire steel ,Rack side steel after Cleaning Dusting of Stain/Dirt with Sand Paper making the Surface smooth,filling the holes with Putty wherever required and Applying two coat of synthetic Olive Green/grey paint as Direected by Engineer-in-Charge. FD-FD-67,FD-351,FD-243,FD-1031,FD-67,,FD-243,FD-1032,FD-1029,FD-356,FD-106(M), FD-1038

ANAND FURNITURE

S B ENTERPRISES

Star Sofa House

M/s M A Traders